Aerosol Monitoring Equipment For Monitoring And Testing Available In Latin America
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The fast system for high-throughput analysis and superior precision for large sample batches: High sensitivity for optimized data acquisition. Universal interference management mode 11 orders dynamic range for full coverage of required concentration ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Teflon filter (50 filters), 2 μm, Ø47 mm. Incl. 50 filters for gravimetric ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Set of 2 blocks, Set of 5 ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter is a portable dilution system that makes sample conditioning as easy as it can be. The Dekati eDiluter comes standard with a fixed 1:60 dilution factor, but it can as well be provided with a customer specific dilution factor in the range of 1:25-1:225. The Dekati eDiluter dilution parameters can be monitored on an integrated LCD display and a rotary controller knob allows the user ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Incl. pressure regulator and gauge, particle filters to remove solid and oil particles from the dilution air and a membrane dryer for water ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C high temperature aerosol samples without the need to cool the sample, which makes the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD III Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide. Sampling gases at pressures greater than sea level, such as 25 – 100 psi, is challenging for particle counters. Connecting pressurized air or gas to a particle counter can defeat its flowmetering system and possibly damage the ...
-
PremiumManufactured by ENVEAbased in FRANCE
The CairClip (USB version) was initially developed for the real-time measurement of pollutants and survey the effect on people suffering from respiratory conditions. The various health and safety management systems in the workplace now requiring more and more the evaluation and the traceability of the workers chronic exposure to risks the CairClip was further developed to measure and to follow-up ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model 108 dilutes an introduced sample gas in a 1:10 (standard), or a 1:100 (optional) dilution rate to allow the linear measurement of hydrocarbon concentrations above several thousand ppm up to 10% and above. The sample injection method is used in this 190 deg.C heated sample diluter for fast response and improved zero and span stability of a hydrocarbon measurements. The Model 108 is also ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
EMFAB filter, TX40 (100 filters), Ø47 mm. Incl. 100 filters for gravimetric ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Exhaust hose for DEED-300, 1 ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PTFE Filter Membranes are produced of pure PTFE resins. They withstand the most severely corrosive conditions at temperatures as high as 500°F (260°C). The membrane is hydrophobic and maintains its strength in both wet and dry environments. PTFE filter media provides durability for hostile acid aerosol monitoring. 1.0 µm pore size ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrohm AeRosol Sampler "MARS" is a simpler solution for aerosol monitoring. The MARS can be used as a preconditioning unit for various analytical applications under ambient conditions or in industrial environments. No sample storage is required. ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Pressure Diluter DEED-300 is a two-stage dilution device for taking aerosol samples from high pressure conditions, such as in pre-DPF tailpipe emission measurements. The DEED-300 is designed especially for high pressure conditions, and it always keeps a constant dilution factor regardless of the sample pressure inside the tailpipe. The total dilution factor in the DEED-300 unit is ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Engine Exhaust Diluter DEED is an engine exhaust conditioning system that fulfills all requirements and recommendations set forth by EURO 6 legislation for a VPR (Volatile Particle ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
eFilter filter cassette, 5 pcs. Filters not ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Axial Diluter DAD is a simple and cost-effective dilution tool that can be used as a stand-alone unit or as a part of other aerosol sampling and dilution systems. The DAD is especially designed for use with Dekati Fine Particle Measurement Instruments and applications where low consumption of dilution air is a requirement. The Dekati Axial Diluter is made of stainless steel which ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The flexible system with ultimate sensitivity and targeted performance optimization using various accessories for advanced research: Ultimate freedom of optimization through full ion focus control. Shortest dwell time and best mass separation. Flexible connection of accessories using two entry ports to the plasma compartment. ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The AeroFid-60 tests up to 80 cans per minute. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample at a time from the head and valve area of each individual aerosol can. The cans freely scroll ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The ParticleSeeker is a 10-port smart manifold companion to the NanoAir™ aerosol nanoparticle counter. The ParticleSeeker is a 10-port smart manifold companion to the NanoAir 10 aerosol nanoparticle counter. Designed specifically for use in the most critical fab spaces, it is available for use in applications that require multiple sample locations to be monitored in a sequential or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you