Only show results in Texas? Ok

aerosol generator (Aerosol Monitoring) equipment

  • Showcase

    AeroFid - Model 200 - Automatic Micro Leak Detector for Filled Aerosol Cans

    The AeroFid-200 tests up to 250 cans per minute also at a footprint of less than 1 sqare meter. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one ...

    By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY. from Aerosol Can Leak Detector Product line

  • Showcase

    Micro Pulse LiDAR - Model MiniMPL - Atmospheric Monitoring System

    The first generation of micro pulse lidar technology was designed by NASA for detecting high cirrus clouds. Our subsequent commercial “Micro Pulse LiDAR” generations (MPL and MiniMPL) have evolved with the goal of making the most cost-effective, robust, and sensitive backscatter lidar possible. This has been achieved by using quality ...

    By Micro Pulse LiDAR, part of Hexagon based in Lanham, MARYLAND (USA).

  • Premium

    Cooper Environmental - Model QAG 825 - Multi-Metal Quantitative Aerosol Generator

    The QAG creates an aerosol of known concentration by nebulizing a solution. The resulting droplets are carried out of the generation area to a drying chamber where they are dried to particles. The aerosol exiting the drying chamber contains known concentrations of analytes calculated from the QAG’s input parameters. The reference aerosol ...

    By Cooper Environmental Services based in Beaverton, OREGON (USA).

  • Klotz - Model ATM 225 - Aerosol Generator

    The aerosol generator ATM 225 is used for generating test aerosols with defined properties. The number concentration of the aerosol particles can be set. From the determined concentration distributions of the produced DEHS aerosol it becomes evident that in the range of expected MPPS (Most Penetration Particle 0.2-0.3 μm) a very high particle ...

    By Markus Klotz GmbH based in Bad Liebenzell, GERMANY.

  • TSI - Model 3076 - Aerosol Generator

    Aerosol Generator Model 3076 is a Collison-type atomizer that generates aerosols of constant particle size in concentrations over 107 particles/cm3. Its nominal aerosol flow rate is 3.0 L/min. Stainless-steel components make it suitable for the specialized applications listed below, in additon to basic aerosol research.

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Generators & Dispersers Product line

  • Model AG-A1 - Aerosol Generator

    The AG-A1 Laskin Nozzle aerosol generator is designed especially for testing of biological safety cabinets and filter systems from 500 to 5000 cfm. The AG-A1 uses simple, easy to operate controls.  The generator utilizes 4 Laskin nozzles, which provides 10ug/l of aerosol when introduced into 5400 cfm of airflow*. This aerosol concentration is ...

    By TEC Services, Inc. based in New Oxford, PENNSYLVANIA (USA).

  • NUCON - Model AGT - Aerosol Generator

    The NUCON Model AGT is a high-output portable thermal aerosol (DOP or PAO) generator. It can provide up to 241 mL/min of submicron PAO, or 121 mL/min of submicron DOP, aerosol. System pressure indicator and all operational controls are on the front panel. Liquid to gas phase conversion takes place in a continuous stainless steel coil cast in an ...

    By NUCON International, Inc. based in Columbus, OHIO (USA). from Quality Instruments Product line

  • Model TDA-4 - Aerosol Generators

    The TDA-4 series family of Laskin-Nozzle aerosol generators are durable, portable, and reliable. Designed for testing filter systems ranging from small glove boxes to large Cleanroom plenums, ATI Laskin Nozzle generators provide the ideal solution for creating a poly-dispersed, sub micron aerosol to certify and qualify in-situ filter systems. End ...

    By Air Techniques International (ATI) based in Hertfordshire, UNITED KINGDOM. from Aerosol Generators Product line

  • TSI - Model 3079A - Aerosol Generators

    Aerosol Generator 3079A is a rugged, compact atomizer generates particles in concentrations up to 108 particles/cm3 and offers an adjustable flow rate from 1.2 to 5.0 L/min. A built-in, low-noise compressor provides compressed air, and the atomizer head is made entirely of stainless steel. Operating components are protected by a hood, making this ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Generators & Dispersers Product line

  • NUCON - Model SN-10 - Aerosol Generator

    The NUCON Model SN-10 produces a uniform particle size distribution aerosol and can be used with a variety of challenge agents. Volumetric output is linear and particle size distribution is constant over a 10-100 psig input pressure range. The SN-10 is the perfect upgrade of the 'Laskin Nozzle' aerosol generator.

    By NUCON International, Inc. based in Columbus, OHIO (USA). from Quality Instruments Product line

  • TSI - Model 3079A - Aerosol Generator

    Aerosol Generator 3079A is a rugged, compact atomizer generates particles in concentrations up to 108 particles/cm3 and offers an adjustable flow rate from 1.2 to 5.0 L/min. A built-in, low-noise compressor provides compressed air, and the atomizer head is made entirely of stainless steel. Operating components are protected by a hood, ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Generators & Dispersers Product line

  • Aerosol Nebulizer - Model ATM 210, 210/H - Atomizer Aerosol Generator

    The ATM 210 Liquid Aerosol Generator produces aerosols with known properties in accordance with guideline VDI 3491. This special model facilitates generation of aerosol into pressurised vessels (up to 10bar). Its design ensures a highly stable particle size distribution and concentration with high reproducibility and a high aerosol output. The ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Generation from Liquids Product line

  • X-Tinguish - Model FST - Handheld Aerosol Generator

    The new X-Tinguish FST is the world's most advanced aerosol firefighting tool. Able to remove over 900° F of heat in thirty seconds, the FST is our best aerosol generator yet.With its cutting-edge non-pyrotechnical pull pin, the FST uses an electrical system to generate aerosol in places unsafe for flames. Extensive research in the field of ...

    By Flame Guard USA based in Lake Barrington, ILLINOIS (USA).

  • Model Compact - Thermal Aerosol Generator

    TEC Services is proud to become the only US and Canadian distributor of this revolutionary thermal aerosol generator manufactured by S & M Electronics Limited. The Compact thermal aerosol generator is designed especially for testing of air handler units and/or HEPA filter systems from 5,300 to 53,000 cfm.

    By TEC Services, Inc. based in New Oxford, PENNSYLVANIA (USA).

  • Model 5C - Thermal Aerosol Generator

    The 5C thermal aerosol generator is versatile and portable. It is ideal for certification of large applications and those requiring a wide range of aerosol concentrations such as in large cleanroom plenums, particularly where compressed air is not available. The 5C provides a high capacity solution for demanding industries such as those of ...

    By Air Techniques International (ATI) based in Hertfordshire, UNITED KINGDOM. from Aerosol Generators Product line

  • Model AG-E3 (Electric) - Electric Aerosol Generator

    The AG-E3 laskin nozzle aerosol generator is a completely self-contained product (no external compressor needed) designed to incorporate the functionality of both of our previous electric cold laskin nozzle model generators (AG-E1 & AG-E2).  The AG-E3 offers the flexibility to leak test low airflow filter systems such as animal racks and ...

    By TEC Services, Inc. based in New Oxford, PENNSYLVANIA (USA).

  • Premium

    Everise - Model EA-12 - Aethalometer

    Black Carbon Aerosol (BC) has recently been identified as a factor, second only to carbon dioxide, resulting in global climate change. Black carbon aerosol generates from the incomplete combustion of fossils and biomass fuels, such as motor vehicle exhaust, thermal power, forest fires and so on. Black carbon aerosols can strongly absorb natural ...

    By Everise Technology Ltd. based in Beijing, CHINA. from Haze Monitor Product line

  • TSI - Electrospray Aerosol Generator

    The Electrospray Aerosol Generator (EAG) produces high concentrations of monodisperse, submicrometer particles from 2 to 100 nm (initial droplet diameter of 150 nm, nominal). The Electrospray pushes a charged liquid solution or suspension through a capillary tube and exerts an electrical field on the liquid at the capillary tip. The electrical ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Electrospray Aerosol Generator Product line

  • Palas - Model AGK 2000 - Aerosol Generators for Solid Particles

    Solid particle aerosols produced from suspensions, e.g. with biological agents, and solutions such as NaCl and KCl, are required for numerous applications in research, development and quality assurance. NaCl/KCl aerosols or aerosols produced from biological agents are prescribed as test aerosols in various standards to ensure comparability of ...

    By Palas GmbH based in Karlsruhe, GERMANY. from Particle Generators - Aerosol Generators For Solid Particles Product line

  • TSI - Large-Particle Aerosol Generator

    Designed primarily for filter testing, the Large-Particle Aerosol Generator produces highly concentrated aerosol in a broad particle-size range, from 0.1 to 10 µm in diameter. It produces potassium chloride (KCl) or other aerosols, and it meets the requirements of the proposed SAE J1669, ISO/CD 11155-1, and ASHRAE 52.2 test codes. This aerosol ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Large-Particle Aerosol Generator Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you