Only show results in Texas? Ok

aerosol instrument (Aerosol Monitoring) equipment

  • Showcase

    Micro Pulse LiDAR - Model MiniMPL - Atmospheric Monitoring System

    The first generation of micro pulse lidar technology was designed by NASA for detecting high cirrus clouds. Our subsequent commercial “Micro Pulse LiDAR” generations (MPL and MiniMPL) have evolved with the goal of making the most cost-effective, robust, and sensitive backscatter lidar possible. This has been achieved by using quality ...

    By Micro Pulse LiDAR, part of Hexagon based in Lanham, MARYLAND (USA).

  • Showcase

    Dekati - Model ELPI+ - Electrical Low Pressure Impactor

    The Dekati ELPI+ (Electrical Low Pressure Impactor) is a widely-used and well-characterized particle size spectrometer for real-time particle measurements. The ELPI+ enables measurement of real-time particle size distribution and concentration in the size range of 6 nm – 10 μm at 10 Hz sampling rate. The measurement method of the ELPI+ is ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Fine Particle Measurement - Real-time Measurement Product line

  • Premium

    Dekati - Model BOLAR™ - Bipolar Charge Analyzer

    The electrical charge carried by inhalation aerosols has been found to affect device performance and lung deposition of Dry Powder Inhalers (DPI), Metered Dose Inhalers (MDI) and nebulizers. The Dekati® ELPI® (Electrical Low Pressure Impactor, Dekati Ltd.) has been widely used to determine the net charge size distribution of inhalation ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Fine Particle Measurement - Real-time Measurement Product line

  • Premium

    Metrohm - Model 2060 MARGA R - A402060120C - Air Monitoring for Research Campaigns

    The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum ...

    By Metrohm AG based in Herisau, SWITZERLAND. from Metrohm Process Analytics Product line

  • Premium

    HPD - Model III - High Pressure Diffuser

    The HPD III Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide. Sampling gases at pressures greater than sea level, such as 25 – 100 psi, is challenging for particle counters. Connecting pressurized air or gas to a particle counter can defeat its ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Airborne Particle Counters Product line

  • Premium

    Metrohm - Model 2060 MARGA M - A402060110C - Continuous Air Monitoring System

    The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum ...

    By Metrohm AG based in Herisau, SWITZERLAND. from Metrohm Process Analytics Product line

  • Premium

    Nano-ID - Model NPC10 - Aerosol Particle Counter

    The Nano-ID® NPC10 Aerosol Particle Counter is the first condensation particle counter specifically developed for ultra-clean manufacturing environments. It provides meaningful data fast by introducing fluid to capture even the smallest particles. This instrument combines 10 nm sensitivity with a high sample flow rate and the lowest zero ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Airborne Particle Counters Product line

  • Premium

    Dekati - Model DAD - Axial Diluter

    The Dekati Axial Diluter DAD is a simple and cost-effective dilution tool that can be used as a stand-alone unit or as a part of other aerosol sampling and dilution systems. The DAD is especially designed for use with Dekati Fine Particle Measurement Instruments and applications where low consumption of dilution air is a requirement. The ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Premium

    Dekati - Model eDiluter™ - Portable Dilution System

    Dekati eDiluter™ is a portable dilution system that makes sample conditioning as easy as it can be. The Dekati eDiluter™ comes standard with a fixed 1:60 dilution factor, but it can as well be provided with a customer specific dilution factor in the range of 1:25-1:225. The Dekati eDiluter™ dilution parameters can be monitored on ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Premium

    Dekati® - Model eDiluter™ Pro - Portable Dilution System

    Dekati eDiluter™ Pro is a portable dilution system that allows easy sample conditioning for a wide range of particle measurement application. Its compact structure includes a two-stage dilution system with an adjustable dilution factor ranging from 1:25 to 1:225. The high sample output of the Dekati eDiluter™ Pro allows the system to ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Premium

    Dekati - Stainless-steel Cyclone

    The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement instrument. Manufactured according to EPA standard 201A, with standard isokinetic nozzles available as accessories, the Dekati Cyclone is a highly ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Premium

    Atmospheric LiDAR Network

    With the increasingly complexity of pollution, the traditional point equipment or a single lidar instrument can not meet monitoring requirements. It’s significant to build a 3D monitoring network from near-ground to medium and high altitude for a lager-scale comprehensive detection of atmospheric environment, by collaboratively operating ...

    By Everise Technology Ltd. based in Beijing, CHINA. from Solutions Product line

  • Premium

    IONICON - Model CHARON - Real-Time Aerosol Inlet for IONICON PTR-TOFMS

    The new CHemical Analysis of aeRosol ON-line (CHARON) particle inlet coupled to IONICON PTR-TOFMS instruments quantitatively detects organic sub-µm particulate matter as well as particulate ammonium and nitrate at single digit ng/m³ mass concentration levels in real-time.

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA. from Accessories and Inlet Systems Product line

  • Aerodyne - Aerosol Mass Spectrometer System (AMS)

    The Aerodyne aerosol mass spectrometer (AMS) is the only currently available instrument capable of providing quantitative size and chemical mass loading information in real-time for non-refractory sub-micron aerosol particles. The AMS couples size-resolved particle sampling and mass spectrometric techniques into a single real-time measurement ...

    By Aerodyne Research, Inc. based in Billerica, MASSACHUSETTS (USA). from Aerosol Mass Spectrometers Product line

  • Model TAG - Thermal Desorption Aerosol Gas Chromatograph

    Our thermal desorption aerosol gas chromatograph provides hourly, in-situ molecular speciation and quantitation of semi-volatile organic aerosols. Developed jointly with the University of California, Berkeley, this instrument is sold through Aerodyne Research, Inc.

    By Aerosol Dynamics Inc. based in Berkeley, CALIFORNIA (USA). from Instruments Product line

  • Model M1520 - Flow-Focusing Monodisperse Aerosol Generator (FMAG)

    The Model 1520 is an aerosol generator for producing monodisperse droplets and aerosol particles. The instrument uses the flow focusing effect to reduce the size of a liquid jet and the resulting size of droplets and reduce the aerosol particle size to 0.7 to 15 µm in diameter. The instrument is referred to as the Flow-Focusing Monodisperse ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Aerosol Generators Product line

  • Aerosol - Light Optical Sensors

    LOAC Light Optical aerosol Counter Developed in cooperation with French research institute LCP2E-CNRS, LOAC determines the concentration of aerosols (numbers of aerosols per cm3) for 20 size classes between 0.3 and 100 urn (with 10 size classes between 0.3 and 5 urn). The instrument can be used to document the physical properties of aerosols in ...

    By Meteomodem based in Ury, FRANCE. from Sensors Product line

  • MSP - Model M1500 - Aerosol Generator and Monitor (AGM)

    The Model 1500 Aerosol Generator and Monitor (AGM) is a multi-function aerosol instrument comprised of an atomizer aerosol generator, a differential mobility analyzer (DMA) and a condensation particle counter (CPC) for aerosol generation and measurement.

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Aerosol Generators Product line

  • Combined Sampling Station

    The AirPhoton combined sampling station measures aerosols in real time using a 3 wavelength integrating nephelometer as well as collecting and preserving the aerosols themselves on filters for later analysis. Aerosols are separated into fine and coarse fractions and preserved on filters protected within a cartridge assembly. The cartridge is ...

    By ​AirPhoton, LLC. based in Baltimore, MARYLAND (USA).

  • Vacuum Pumps

    TSI offers two, top-quality pumps for use with our Particle Instruments. They provide a reliable, portable vacuum source for aerosol research. Features and Benefits: Virtually maintenance-free operation, Recommended for specific TSI Particle Instruments. Applications: Particle sizing, Particle counting, Aerosol generation.

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Vacuum Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you