Only show results available in Virginia? Ok

Aerosol Sample (Aerosol Monitoring) equipment

  • Showcase

    AeroFid - Model 60 - Automatic Micro Leak Detector for Filled Aerosol Cans

    The AeroFid-60 tests up to 80 cans per minute. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample at a time from the head and valve area of ...

    By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY. from Aerosol Can Leak Detector Product line

  • Dekati - Model Diluter - Aerosol Sample Diluter / Gaseous Sample Diluter

    Dekati® Diluter DI-1000 is a low-cost, simple and easy-to-operate device for diluting aerosol and gaseous samples from any source. The simplicity, ability to withstand high temperatures and the robustness of the all stainless-steel design have made it a widely renowned choice for dilution of combustion aerosols. The nominal dilution factor for ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Premium

    Aerosol-resistant Filter Tips

    Hydrophobic Filter Eliminates Contamination. Rainin's aerosol-resistant filters are made from pure virgin molded polyethylene. Machine-loaded, these tips are completely untouched during manufacturing and packaging, and are certified free of RNase, DNase, DNA, and pyrogen contamination. In addition, all filter tips are presterilised by ...

  • Premium

    Rainin - Aerosol-resistant Filter Tips

    Hydrophobic Filter Eliminates Contamination. Rainin's aerosol-resistant filters are made from pure virgin molded polyethylene. Machine-loaded, these tips are completely untouched during manufacturing and packaging, and are certified free of RNase, DNase, DNA, and pyrogen contamination. In addition, all filter tips are presterilised by ...

  • Premium

    AeroFid - Model 200 - Automatic Micro Leak Detector for Filled Aerosol Cans

    The AeroFid-200 tests up to 250 cans per minute also at a footprint of less than 1 sqare meter. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one ...

    By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY. from Aerosol Can Leak Detector Product line

  • Aerosol Neutralizer - Model EAN 581 - Bipolar Electrostatic Discharger

    The mechanical interaction of particles, especially solid ones, may cause undesirable levels of electrostatic charge. Test dusts must be generated with a high degree of reproducibility for instance when evaluating aerosol separation techniques such as cyclones, filters or impactors. Comparable results can only be obtained at controlled and similar ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Conditioning and Sampling Product line

  • Premium

    AeroFid - Model 100 - Automatic Micro Leak Detector for Filled Aerosol Cans

    The AeroFid-100 tests up to 120 cans per minute at a footprint of less than 1 sqare meter. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample ...

    By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY. from Aerosol Can Leak Detector Product line

  • Premium

    Metrohm - Inline Sample Preparation (MISP) for Difficult Sample Matrices

    Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of analyses and ...

    By Metrohm AG based in Herisau, SWITZERLAND. from Ion Chromatography Product line

  • Aerosol Diluter - Model DDS 560 - Dynamic Dilution System

    The Dynamic Dilution System DDS 560 is designed to definitely and reproducibly dilute aerosols according to EN ISO 14644 part 3 and VDI 3491 Blatt 15 with possibility to adjust the dilution factor. The adjusted dilution factor is shown on a display. On the basis of this principle particles are removed from the sample according to the chosen and ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Dilution Product line

  • Premium

    Buck-BioAire - Model B6 - Single Stage Microbial Sampler

    The Buck-BioAire B6 Single Stage Microbial Sampler makes the collection and assessment of aerosol samples fast and easy. A Petri dish containing appropriate agar medium is placed in the impactor and a sample of air is drawn. The Petri dish is removed, recovered, incubated, and counted by an accepted method.

    By A. P. Buck Inc. based in Orlando, FLORIDA (USA). from Area Sampling Pumps Product line

  • Dekati - Thermodenuder

    Dekati® Thermodenuder is used to remove volatile and semivolatile compounds from aerosol sample in order to eliminate unwanted sample transformations e.g. in engine exhaust measurements. The volatile and semivolatile compounds are vaporized when they enter the instrument and then adsorbed into active charcoal which has been designed to the form of ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Diffusion Dryer - Model DDU 570 - Diffusion Dryer

    The Diffusion Dryer DDU 570 has been developed mainly as additional equipment for the Aerosol Generators produced by Topas GmbH. The diffusion dryer consists of an Acryl tube with 2 caps on its ends and tube connectors. In the operation status the dryer is filled with Silica gel. The aerosol to be dried is streaming through 3 screen pipes which ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Conditioning and Sampling Product line

  • Aerosol Particle Size Spectrometer - Model LAP 322 - Particle Size and Concentration Measurement

    The Aerosol Particle Size Spectrometer LAP 322 provides the determination of aerosol particle size distributions (0.2-40µm) and particle concentrations. It  is based on optical single-particle measurements by means of 90° scattered light measurement. By dint of high number of provided particle size classes a high particle sizing resolution can be ...

    By Topas GmbH based in Dresden, GERMANY. from Particle Size Measurement Product line

  • Dekati - Model DAD - Axial Diluter

    Dekati® Axial Diluter DAD-100 is a simple and cost-effective dilution tool for any dilution task. Especially designed for use with Dekati® Instruments, the DAD-100 is very simple to install into any sampling or measurement system. All-stainless steel design makes it also possible to heat the diluter up to 500°C.

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Dekati - Model FPS - Fine Particle Sampler

    Dekati® Fine Particle Sampler is a guaranteed solution for diluting and conditioning aerosol and gaseous samples for measurement instruments. This versatile dilution system allows dilution factor adjustment between 1:20 and 1:200 and first stage dilution temperature settings between 0 and 350 °C. Temperatures and pressures in different parts of ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Dekati - Cyclone

    Dekati® Cyclone is an all stainless steel cyclone for removal of large particles from a sample stream. Manufactured according to EPA standard 201A (EPA standard 201a.pdf), with standard isokinetic nozzles available as accessories, the Dekati® Cyclone is a highly durable addition to any sampling line where removal of large particles is needed. The ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Dekati - Model DEED - Engine Exhaust Diluter

    Dekati® Engine Exhaust Diluter DEED is a fully EURO5b/6 conform engine exhaust conditioning system. In contrast to multi-stage dilution systems in general, DEED is a simple, easy-to-use system that conditions the sample precisely and in a repeatable manner every time. The DEED fulfils all requirements and recommendations set in EURO5b/6 standard ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Fast Aerosol Spectrometer - TR-DMPS

    To measure aerosol size distributions, this instrument system performs three operational functions: charging, size classification, and detection. Particle charging is accomplished by exposing the aerosol sample to intense monochromatic UV light which results in photoelectric ejection of electrons from particle surfaces. The charged aerosol then ...

    By Grimm Technologies based in Douglasville, GEORGIA (US) (USA).

  • Brechtel - Model 1200 - Isokinetic Inlet System

    Sampling particles from moving platforms can be tough – especially larger coarse-mode aerosol that are easily lost inside inlets due to turbulent deposition. The Isokinetic Inlet System has been designed using our wind tunnel facility to minimize particle losses in aircraft sampling applications where automated operation and field-tested ...

    By Brechtel based in Hayward, CALIFORNIA (USA). from Sampling Product line

  • Brechte - Model 8100 - Pumped Counterflow Virtual Impactor (PCVI)

    The PCVI is a virtual impactor that allows on-line separation of coarse from fine aerosol. The separation size is variable over the 0.3 to 5 micron diameter range, and the device is small enough to fit in the palm of your hand. With two mass flow controllers, the flows inside the PCVI can be varied to quickly change the particle size ...

    By Brechtel based in Hayward, CALIFORNIA (USA). from Sampling Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you