Aerosol Monitoring Equipment For Monitoring And Testing In Belgium
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The robust system for efficient and stable characterization of high matrix samples: Outstanding plasma robustness for high matrices. Minimized drift at changing matrix load. Efficient interference management with outstanding ease of use. ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and it features a built in “low noise” blower together with ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The fast system for high-throughput analysis and superior precision for large sample batches: High sensitivity for optimized data acquisition. Universal interference management mode 11 orders dynamic range for full coverage of required concentration ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The flexible system with ultimate sensitivity and targeted performance optimization using various accessories for advanced research: Ultimate freedom of optimization through full ion focus control. Shortest dwell time and best mass separation. Flexible connection of accessories using two entry ports to the plasma compartment. ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD III Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide. Sampling gases at pressures greater than sea level, such as 25 – 100 psi, is challenging for particle counters. Connecting pressurized air or gas to a particle counter can defeat its flowmetering system and possibly damage the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Advanced Aerosol Manifold for sequentially monitoring aerosol contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM II Aerosol Manifold from Particle Measuring Systems offers advanced features for sequentially monitoring contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM II aerosol manifold is ideal for trend ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The ParticleSeeker is a 10-port smart manifold companion to the NanoAir™ aerosol nanoparticle counter. The ParticleSeeker is a 10-port smart manifold companion to the NanoAir 10 aerosol nanoparticle counter. Designed specifically for use in the most critical fab spaces, it is available for use in applications that require multiple sample locations to be monitored in a sequential or ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The high sensitivity instrument for routine ultratrace element detection in clean sample matrices: Ultra sensitive and stable performance for best signal-to-noise ratio. High ion transmission with full sensitivity control on complete mass range. Market leading abundance ...
-
Manufactured by KAMPS s.a.based in BELGIUM
The COVERMAX is a completely covered surface aerator. It is designed in order to answer to WWTP specific requirements. As a result of the high efficiency –low speed and –high diameter aerators ...
-
Manufactured by KELMA NVbased in BELGIUM
The heated JPES sample probe is designed for use in extractive sampling systems with sample gases containing dust and aerosol, especially for measurement in not stationary applications.Different pipes - heated and unheated-, materials and filters as well as heated hoses make the JPES very flexible for different ...
-
Manufactured by FLIR Systems Inc.based in USA
The IBAC is a continuously-operating monitor that provides early warning of biological aerosol threats. The IBAC facilitates the process of identifying bio-terror agents to allow timely containment, treatment and remediation. Monitors are designed to detect concentrated levels of biological aerosols. Possible agents released in a bio-threat attack can include bacterial spores (such as B. ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrohm AeRosol Sampler "MARS" is a simpler solution for aerosol monitoring. The MARS can be used as a preconditioning unit for various analytical applications under ambient conditions or in industrial environments. No sample storage is required. ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of analyses and ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be limited by ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be limited by ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
The Quantitative Aerosol Generator (QAG) creates an aerosol of known concentration by nebulizing a solution. The resulting droplets are carried out of generation area to a drying chamber where they are dried to salt particles. Depending on the application for the salt particles the size can be varied to a number mean between 0.1 and 2 µm in diameter. The aerosol exiting the drying chamber ...
-
Manufactured by Palas GmbHbased in GERMANY
QAL1 / MCERTS certified real-time fine dust monitors for air quality measurement and regulatory ...
-
Manufactured by Droplet Measurement Technologies (DMT)based in USA
The Micro Pulse LiDAR (MPL) is elastic backscatter LiDAR designed for long-term, autonomous aerosol and cloud monitoring. Pulses of energy are transmitted into the atmosphere; the energy scattered back to the transceiver is collected and measured as a time-resolved signal, thereby detecting clouds and aerosols in real time. MPL data can be used for measurement of cloud boundaries, calculating ...
-
Manufactured by Droplet Measurement Technologies (DMT)based in USA
The CCP is a multipurpose particle spectrometer that includes three Droplet instruments (CDP, CIP, and LWC) – plus temperature and relative humidity sensors – in a single package. Researchers use the CCP to obtain aerosol particle and cloud hydrometeor size ...
-
Manufactured by Palas GmbHbased in GERMANY
High resolution aerosol spectrometer for particle size measurement from 145 nm to 100 µm with latest LED ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you