Aerosol Particle Monitoring Equipment For Monitoring And Testing Available In Wisconsin
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and it features a built in “low noise” blower together with ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The ParticleSeeker is a 10-port smart manifold companion to the NanoAir™ aerosol nanoparticle counter. The ParticleSeeker is a 10-port smart manifold companion to the NanoAir 10 aerosol nanoparticle counter. Designed specifically for use in the most critical fab spaces, it is available for use in applications that require multiple sample locations to be monitored in a sequential or ...
-
Manufactured by Airmodus Oybased in FINLAND
The Airmodus products can be delivered with complete supporting solutions; e.g. with pumps, vacuum systems ...
-
Manufactured by Aerosol Dynamics Inc.based in USA
The Spot Sampler captures fine and ultrafine particles in a concentrated manner for easy, off-line analysis. Its moderated condensational technology enlarges particles without temperature extremes, making it ideal for volatile or biological ...
-
Manufactured by Handix Scientific LLCbased in USA
The Portable Optical Particle Counter (POPS) is a light-weight particle counter designed for aerosol particle size distribution measurements from unmanned aerial platforms, indoor environments, ground-based sensor networks and clean room monitoring. The POPS accurately measures particle diameters between approximately 0.15 to 3.0 um using single-particle light scattering with a power consumption ...
-
Manufactured by Biotechnix, Inc.based in USA
Biotechnix technologies provide efficient interfaces to a variety of analyzers. Whether the chosen analysis method is polymerase chain reaction (PCR), proteomics or immunoassay, our microchannel fluid concentrator enables portability and affordability not found in other devices. The Biotechnix µADL (micro-aerodynamic lens) aerosol concentrator has been demonstrated to be effective as ...
-
Manufactured by Aerosol Devices Inc.based in USA
The BioSpot-GEM bioaerosol sampler, provides fast and easy, yet high efficiency collection of bioaerosol particles directly onto a swab. Designed for field applications, the BioSpot-GEM sampler is portable and easy to use. Environmental and IAQ professionals can effectively sample the air for pathogens with the same confidence as a scientific aerosol research expert. ...
-
Manufactured by Amtech Military & Automation Systems (AMAS)based in CANADA
C-FLAPS is the latest biological detection system from a distinguished pedigree of proven, fielded and flexible solutions by the team of Dycor Technologies Ltd. and TSI Incorporated. It is an off-the-shelf system, deployed operationally with defense (reconnaissance vehicles, fixed-site), homeland security, public health and advanced research customers around the world ...
-
Manufactured by American Ecotech LLCbased in USA
Aerosol particles in the atmosphere directly influence the earth's radiative balance by absorbing and scattering the solar radiation and indirectly, by changing the clouds microphysical properties. The amount of sunlight reaching the earth's surface, rather than being scattered back to space, is an important parameter to accurately model the influence of aerosol scattering on the earth's ...
-
Manufactured by Kanomax USA, Inc.based in USA
Particle size distribution measurement is normally used in order to measure nanosized particle distribution. While Differential Mobility Analyzers (DMA) classify particle by particle size utilizing electrostatic force, an APM classifies particles by mass based on entirely new classification ...
-
Manufactured by Research International, Inc.based in USA
TacBio was developed by the U.S. government for military, homeland security, and public health applications. It is a compact and rugged portable biological particle detector that uses both diffractive scattering and natural biological fluorescence to monitor aerosol particulates and classify them as being of either biological or non-biological ...
-
Manufactured by Airmodus Oybased in FINLAND
Airmodus A11 nano Condensation Nucleus Counter (nCNC) is the only commercially available measurement system for determining the size distribution of both neutral and charged 1-4 nm aerosol ...
-
Manufactured by Airmodus Oybased in FINLAND
Airmodus A23 Condensation Particle Counter is a user-friendly tool for all applications where counting aerosol particles larger than 23 nm is a necessity. It fulfills the requirements of the Particle Measurement Protocol (PMP) for EURO 5/6. The A23 can be used both as a stand-alone instrument for measuring the total particle number concentration, and as a counter in different kinds of aerosol ...
-
Manufactured by Kanomax USA, Inc.based in USA
The Kanomax Aerosol Particle Monitor features an easy-to-read display, can connect to a network via ethernet, and offers simplified monitoring of particulates at multiple locations. The AES-1000 particle monitoring system provides near real time stable particle measurements at low cost. Measurement covers the equivalent range of ISO class 5 through ISO class 8. It uses a long life semiconductor ...
-
Manufactured by Aerosol Devices Inc.based in USA
The BioSpot-VIVAS bioaerosol sampler, provides high-efficiency, gentle collection of bioaerosols into a liquid medium. It uses a patented laminar-flow water condensation growth tube (CGT) ...
-
Manufactured by Aerosol Devices Inc.based in USA
The Series 110A Universal Spot Sampler provides maximum flexibility for aerosol research requiring a variety of analytical approaches. The common growth tube platform accommodates easy exchange between Liquid Spot and Sequential Spot Collector modules. ...
-
Manufactured by Brechtelbased in USA
The SEMS is a scanning mobility spectrometer that allows rapid aerosol number size distribution measurements. Scan times of just a few seconds are possible. It also serves as a monodisperse particle generator to calibrate other particle instruments. The SEMS is an easy-to-use and field-ready tool. With an intuitive software interface, the SEMS is easy to configure with quick data post-processing ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you