Only show results available in Connecticut? Ok

aerosol sample (Aerosol Sampling) equipment

  • Premium

    Dekati - Model Diluter DI-1000 - Aerosol Sample Diluter / Gaseous Sample Diluter

    The Dekati Diluter DI-1000 is an easy-to-operate and reliable dilution device for diluting aerosol and gaseous samples from any source. The simplicity, ability to withstand high temperatures and the robust, all stainless-steel design have made it a popular choice for dilution of combustion aerosols. In high temperature applications, the Dekati ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Showcase

    Dekati - Model ELPI+ - Electrical Low Pressure Impactor

    The Dekati ELPI+ (Electrical Low Pressure Impactor) is a widely-used and well-characterized particle size spectrometer for real-time particle measurements. The ELPI+ enables measurement of real-time particle size distribution and concentration in the size range of 6 nm – 10 μm at 10 Hz sampling rate. The measurement method of the ELPI+ is ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Fine Particle Measurement - Real-time Measurement Product line

  • Premium

    Metrohm - Inline Sample Preparation (MISP) for Difficult Sample Matrices

    Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of analyses and ...

    By Metrohm AG based in Herisau, SWITZERLAND. from Ion Chromatography Product line

  • Premium

    Dekati - Model HT-ELPI+ - High Temperature Electrical Low Pressure Impactor

    The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C aerosol samples without the need to cool ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Fine Particle Measurement - Real-time Measurement Product line

  • Premium

    Dekati - Model DEED-300 - High Pressure Diluter

    The Dekati High Pressure Diluter DEED-300 is a two-stage dilution device for taking aerosol samples from high pressure conditions, such as in pre-DPF tailpipe measurements. The DEED-300 is designed especially for high pressure conditions, and it always keeps a constant dilution factor regardless of the sample pressure inside the tailpipe. The ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Premium

    Dekati - Stainless-steel Cyclone

    The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement instrument. Manufactured according to EPA standard 201A, with standard isokinetic nozzles available as accessories, the Dekati Cyclone is a highly ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Premium

    Metrohm - Model 2.136.0400 - Particle Into Liquid Sampler - PILS

    Particle into Liquid Sampler for the collection of ambient aerosols. Coupling with ion chromatographs allows automatic determination of the ionic composition of the aerosols without requiring additional sample preparation.

    By Metrohm AG based in Herisau, SWITZERLAND. from Voltammetry Product line

  • Premium

    Dekati - Model eDiluter™ - Portable Dilution System

    Dekati eDiluter™ is a portable dilution system that makes sample conditioning as easy as it can be. The Dekati eDiluter™ comes standard with a fixed 1:60 dilution factor, but it can as well be provided with a customer specific dilution factor in the range of 1:25-1:225. The Dekati eDiluter™ dilution parameters can be monitored on ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Premium

    Nano-ID - Model NPC10 - Aerosol Particle Counter

    The Nano-ID® NPC10 Aerosol Particle Counter is the first condensation particle counter specifically developed for ultra-clean manufacturing environments. It provides meaningful data fast by introducing fluid to capture even the smallest particles. This instrument combines 10 nm sensitivity with a high sample flow rate and the lowest zero ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Airborne Particle Counters Product line

  • Premium

    Dekati® - Model eDiluter™ Pro - Portable Dilution System

    Dekati eDiluter™ Pro is a portable dilution system that allows easy sample conditioning for a wide range of particle measurement application. Its compact structure includes a two-stage dilution system with an adjustable dilution factor ranging from 1:25 to 1:225. The high sample output of the Dekati eDiluter™ Pro allows the system to ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Premium

    Dekati - Model DAD - Axial Diluter

    The Dekati Axial Diluter DAD is a simple and cost-effective dilution tool that can be used as a stand-alone unit or as a part of other aerosol sampling and dilution systems. The DAD is especially designed for use with Dekati Fine Particle Measurement Instruments and applications where low consumption of dilution air is a requirement. The ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Premium

    Dekati - Model DLPI+ - Low Pressure Impactor

    The DLPI+ (Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size distribution. The DLPI+ classifies and collects particles into 14 size fractions in the range of 16 nm – 10 μm. In each size fraction, the particles are collected on 25 mm collection substrates that are weighed ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Fine Particle Measurement - Gravimetric Measurement Product line

  • Premium

    Dekati - Model HT-DLPI+ - High Temperature Low Pressure Impactor

    The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size distribution. The HT-DLPI+ can be heated up to 180 °C allowing direct measurement of up to 180 °C aerosol samples without the risk of condensation or sample transformations. The impactor support ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Fine Particle Measurement - Gravimetric Measurement Product line

  • Premium

    Dekati - Model DEED - Engine Exhaust Diluter

    The Dekati Engine Exhaust Diluter DEED is an engine exhaust conditioning system that fulfills all requirements and recommendations set forth by EURO 6 legislation for a VPR (Volatile Particle Remover). The DEED unit can be used together with any particle concentration or size distribution measurement device since the sample at the outlet of the ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Premium

    Whatman - QM-A Quartz microfiber filters

    High-purity quartz (SiO2) microfiber filters are used for air sampling in acidic gases, stacks, flues and aerosols, particularly at high temperatures up to 500° C and in PM-10 testing. Because of the low level of alkaline earth metals, 'artifact' products of sulfates and nitrates (from SO2 and NO2) are virtually eliminated. QM-A, sequentially ...

    By GE Healthcare Life Sciences based in Marlborough, MASSACHUSETTS (USA). from Quartz fiber filters Product line

  • Magee Scientific - Sample Inlet Dryer

    Drying an aerosol sample stream is necessary in locations where the ambient air has high Relative Humidity.  This improves the accuracy and reproducibility of the scientific measurement, and protects the measuring equipment from water condensation. If an ambient air stream of high dewpoint (condensation temperature) is brought into an ...

    By Magee Scientific Company based in Berkeley, CALIFORNIA (USA). from Other Products Product line

  • Combined Sampling Station

    The AirPhoton combined sampling station measures aerosols in real time using a 3 wavelength integrating nephelometer as well as collecting and preserving the aerosols themselves on filters for later analysis. Aerosols are separated into fine and coarse fractions and preserved on filters protected within a cartridge assembly. The cartridge is ...

    By ​AirPhoton, LLC. based in Baltimore, MARYLAND (USA).

  • IsoSense - Model MDI or TDI - Sampling Unit

    The IsoSense is a portable and economical sampling device ideal for measuring vapor and aerosol levels of isocyanate compounds (TDI & MDI) down to 1ppb. Speciall designed for personal exposure evalutations, area surveys and emergency response.

    By DOD Technologies Inc based in Cary, ILLINOIS (USA). from Portable Gas Detector Product line

  • SASS - Model 4100 - Two Stage Aerosol Collector

    two-stage filter-based aerosol collection device. Many applications require the collection and analysis of aerosol particles, ranging from environmental air sampling and counter-terrorism to epidemiology, medicine, and agriculture. These applications typically involve the monitoring or collection of airborne plant, animal or human pathogens. But ...

    By Research International, Inc. based in Monroe, WASHINGTON (USA). from Collection Tools Product line

  • Brechtel - Model 4001 - Particle Into Liquid Sampler (PILS)

     The PILS is one of the simplest methods available to acquire samples for aerosol chemistry applications. It can be easily integrated with the analytical method of your choice. Ion chromatography systems and total organic analyzers are routinely used with the PILS. These analytical methods allow on-line analyses of aerosol ...

    By Brechtel based in Hayward, CALIFORNIA (USA). from Chemistry and Black Carbon Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you