Only show results available in Connecticut? Ok

aerosol sample collection (Aerosol Sampling) equipment

  • Premium

    Metrohm - Model 2.136.0400 - Particle Into Liquid Sampler - PILS

    Particle into Liquid Sampler for the collection of ambient aerosols. Coupling with ion chromatographs allows automatic determination of the ionic composition of the aerosols without requiring additional sample preparation.

    By Metrohm AG based in Herisau, SWITZERLAND. from Voltammetry Product line

  • Premium

    Dekati - Model HT-DLPI+ - High Temperature Low Pressure Impactor

    The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size distribution. The HT-DLPI+ can be heated up to 180 °C allowing direct measurement of up to 180 °C aerosol samples without the risk of condensation or sample transformations. The impactor support ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Fine Particle Measurement - Gravimetric Measurement Product line

  • Premium

    Dekati - Model DLPI+ - Low Pressure Impactor

    The DLPI+ (Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size distribution. The DLPI+ classifies and collects particles into 14 size fractions in the range of 16 nm – 10 μm. In each size fraction, the particles are collected on 25 mm collection substrates that are weighed ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Fine Particle Measurement - Gravimetric Measurement Product line

  • SASS - Model 4100 - Two Stage Aerosol Collector

    two-stage filter-based aerosol collection device. Many applications require the collection and analysis of aerosol particles, ranging from environmental air sampling and counter-terrorism to epidemiology, medicine, and agriculture. These applications typically involve the monitoring or collection of airborne plant, animal or human pathogens. But ...

    By Research International, Inc. based in Monroe, WASHINGTON (USA). from Collection Tools Product line

  • Tisch - Model 3306 - Impactor Inlet

    The Impactor Inlet is an accessory for the Aerodynamic Particle Sizer® (APS™) spectrometer. It combines a single-stage impactor with a filter to take a size-segregated sample. It then directs a small, representative sample of the initial test aerosol (diluted at 80 to 1) into the APS spectrometer for size-distribution measurement. The ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Particle Sizers Product line

  • Brechtel - Model 4001 - Particle Into Liquid Sampler (PILS)

     The PILS is one of the simplest methods available to acquire samples for aerosol chemistry applications. It can be easily integrated with the analytical method of your choice. Ion chromatography systems and total organic analyzers are routinely used with the PILS. These analytical methods allow on-line analyses of aerosol ...

    By Brechtel based in Hayward, CALIFORNIA (USA). from Chemistry and Black Carbon Product line

  • Combined Sampling Station

    The AirPhoton combined sampling station measures aerosols in real time using a 3 wavelength integrating nephelometer as well as collecting and preserving the aerosols themselves on filters for later analysis. Aerosols are separated into fine and coarse fractions and preserved on filters protected within a cartridge assembly. The cartridge is ...

    By ​AirPhoton, LLC. based in Baltimore, MARYLAND (USA).

  • Model 4200 and 4240 Series - Virtual Impactor Aerosol Concentrator

    Model 4200 and Model 4240 AEROSOL CONCENTRATOR is a virtual impactor aerosol concentrator. Air is sampled at 300 L/min per minute into the concentrator. Particles >2.0 µm (Model 4220) or >1.0 µm (Model 4240) are classified by inertial separation and concentrated into a 1.0 L/min air stream for collection and analysis. Patented ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - 4200 Series Aerosol Concentrators Product line

  • Fast Aerosol Spectrometer - TR-DMPS

    To measure aerosol size distributions, this instrument system performs three operational functions: charging, size classification, and detection. Particle charging is accomplished by exposing the aerosol sample to intense monochromatic UV light which results in photoelectric ejection of electrons from particle surfaces. The charged aerosol then ...

    By Grimm Technologies based in Douglasville, GEORGIA (US) (USA).

  • Buck-BioAire - Model B6 - Single Stage Microbial Sampler

    The Buck-BioAire B6 Single Stage Microbial Sampler makes the collection and assessment of aerosol samples fast and easy. A Petri dish containing appropriate agar medium is placed in the impactor and a sample of air is drawn. The Petri dish is removed, recovered, incubated, and counted by an accepted method.

    By A. P. Buck Inc. based in Orlando, FLORIDA (USA). from Area Sampling Pumps Product line

  • Bacterial and Contamination

    37mm monitors suitable for small volume field sampling and analysis of fluids or aerosols: Transparent 37 mm monitors packaged with membrane filter and absorbent pad (preassembled); available presterilized Ideal for collecting field samples and transporting samples to the laboratory for analysis Choose from 2- or 3-piece monitors; with black or ...

    By Advantec MFS, Inc. based in Dublin, CALIFORNIA (USA).

  • Model OC-EC Lab - Aerosol Analyzer

    The Lab OC-EC Aerosol Analyzer is the industry standard for environmental and workplace monitoring. This instrument uses a proven thermal-optical method to analyze for OC-EC aerosols collected on quartz filters. It is the basis for NIOSH Method 5040 and is fully compliant with the IMPROVE protocol. It features a new and improved microcontroller ...

    By Sunset Laboratory, Inc. based in Tigard, OREGON (USA).

  • Button Aerosol Sampler

    The Button Sampler, with its porous curved-surface inlet, is designed to improve the collection characteristics of inhalable dust, including bioaerosols for viable or non-viable analysis. Use the Button Sampler for low-level personal or area sampling of inhalable dust.

    By SKC Inc. based in Eighty Four, PENNSYLVANIA (USA). from Biological Samplers Product line

  • BioSpot - Model 300-P - Enhanced Bioaerosol Collector

    Inhalation of viruses, bacteria, fungal spores and toxins can lead to respiratory infections and allergic reactions. Existing bioaerosol samplers are designed to collect particles > 0.5µm and therefore have low collection efficiency for viral aerosols, exhaled proteins and other fragments of biological material. Common sampling methods ...

    By Aerosol Devices Inc. based in Fort Collins, COLORADO (USA). from Biospot Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you