Air Monitoring Standards Equipment For Monitoring And Testing Available In Togo
-
ShowcaseManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Our flagship model is the i8-1000 line. It took over three years to develop and is at the forefront combustion technology, offering impressive burn rates and large batch sizes while still achieving some of the lowest emissions in its class. The i8-1000 can be customised with external cladding and automatic loading/de-ash to provide an effective and sustainable waste disposal solution for many ...
-
PremiumManufactured by Myron L Companybased in USA
ULTRAPEN PT6 Benefits: Reliable Repeatable Results, accurate, affordable, easy to use, rugged design, ensure product quality, reduce waste, protect the ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The MDS-10GT has been designed to be the best inner city, entry-level truck on the market. It is fuel efficient, easy to maneuver and quiet. Although the MDS-10GT is compact, it gets the job done with a legal payload capacity of 5,000 lbs and throughput of up to 3,200 ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Ozone precursors measurement in the ambient air. Synspec GC 955 series 611/811 is a combination of two gas analysers for online continuous monitoring of ozone precursors in the ambient air. GC 955 811 is specifically designed for the measurement of the hydrocarbons from C2 up to C5 and the model 611 for the hydrocarbons from C6 up to C12. With the combination of these two GCs nearly all of the ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
High-end conductometer, based on the 856 Conductivity Module, including 900 Touch Control, 5-ring conductivity measuring cell and calibration standards. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells. The Conductivity Module has two USB ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The PermaCal has been developed in collaboration with the METAS (Swiss Federal Institute of Metrology). The most complex configuration consists in a double stage dilution and permeation system. The device can be available in a portable or rackable casing. The portable version is equipped with a battery and an internal pump with dryer that will provide flow to the permeation oven during the ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-604DTE Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The GAS-604DTE Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flow rate range attainable through the filter media is dependent upon the air porosity of the filter media. Flow rates as high as 85 m3/hr ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The MDX-1 is ultra high security, performance and payload. It does more so you can do more! The MDX-1 is revolutionary! Ultra high security with the press of a button, throughput and payload up to 2,950 kgs/hr and 6,000 ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The MDX-1 is ultra high security, performance and payload. It does more so you can do more! The MDX-1 is revolutionary! Ultra high security with the press of a button, throughput and payload up to 2,950 kgs/hr and 6,000 ...
-
PremiumManufactured by Myron L Companybased in USA
ULTRAPENx2 PTBT2 Benefits: Reliable repeatable results, affordable, rugged design, reduce waste, accurate, easy to use, ensure product quality, protect the ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The OLCT 60 is a generation of high quality gas detectors which covers all industrial needs for a variety of applications. The OLCT 60 Series is composed of several versions: XP or IS sensor (toxic or oxygen versions). Remote or on-board sensor. The OLCT 60AD version allows the sensor to be installed remotely up to 15 meters (standard), allowing detection in inaccessible locations, or in Zone 0 ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The service carts of the G057R01 ECONOMY series have been specially designed for gaseous and liquid storage of gas mixtures for the complete gas handling of Alternative Insulating Gases. With the device series for gas mixtures with C4-FN, DILO sets highest priorities to zero emissions. This allows the complete gas handling of Alternative Insulating Gases to be carried out efficiently and safely on ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
884 Professional VA semi-automated for CVS is a convenient high-end routine analyzer for determinations of organic additives in electroplating baths with "Cyclic Voltammetric Stripping" (CVS), "Cyclic Pulse Voltammetric Stripping" (CPVS), and chronopotentiometry (CP), or voltammetric heavy metal determinations with rotating disk electrodes. The proven Metrohm electrode method combined with a ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
NIR instrument for the harshest environments. ProxiMate, a NIR instrument for the harshest environments, is designed for the food and feed industry. The compact system can be operated anywhere by anyone thanks to a simple interface and pre-calibration packages that ensure speed and ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q Environmental Products Company’s “FHA-Series” adapters are designed to reduce overall pressure drop found during the calibration of standard 4” diameter and 8” x 10” filter paper sampling applications. The FHA’s unique design reduces the overall paper to adapter fitting contact, thereby allowing the maximum obtainable free cross-sectional surface ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
884 Professional VA manual for CVS applications is the entry-level for high-end determinations of organic additives in electroplating baths with "Cyclic Voltammetric Stripping" (CVS), "Cyclic Pulse Voltammetric Stripping" (CPVS), and chronopotentiometry (CP), or voltammetric heavy metal determinations with rotating disk electrodes. The proven Metrohm electrode method combined with a completely ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
ISO 14644-1/2 Education and Resources. ISO 14644-1/2:2015 continues to pose challenges to cleanroom managers and manufacturers. Here we provide several sources of information to help everyone from those new to this ISO regulation to veterans in the field. Our team of regulatory experts has put together a package of information so you can easily understand the requirements and what you need to do ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
884 Professional VA is the universal entry-level instrument in the Professional VA/CVS instrument series. In conjunction with the compatible measuring head and compatible electrode set, you can perform trace analysis determinations, voltammetry with the Multi-Mode Electrode pro, or determinations of organic additives in electroplating baths, with "Cyclic Voltammetric Stripping" (CVS), "Cyclic ...
-
PremiumManufactured by Challenge Technologybased in USA
A computer controlled, automated, testing machine, for measuring bulk specific gravity of gyratory samples or field cores of ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The BA80H is a 3-inch mobile high head pump suitable for pumping slightly polluted fluids with solids up to 25 mm. The centrifugal pump is fitted with its own priming system and is therefore dry self-priming. A modern and economical diesel engine meets the highest emission standards for use worldwide. This high head pumpset can be used in a variety of applications such as tank cleaning, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you