Air Monitoring Standards Services For Monitoring And Testing Available In Nicaragua
-
Premiumbased in USA
We run a cutting-edge, brand agnostic laboratory with specialty testing and metrology. What is calibration? Calibration is the comparison of a measurement device or an instrument against a known standard. The standard in a measurement is considered to be the more correct of the two and one would calibrate the device under test to know how far it deviates from the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Our service technicians are well trained to calibrate your PMS instruments to the highest standards and our software-controlled approach automates critical steps that drive consistency in each calibration. This ensures the same calibration result and performance, consistent with the factory calibration, regardless of where the calibration is performed—anywhere in the ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Your Advanced Energy equipment is critical to your processes and research. That’s why our fully equipped, expertly staffed calibration laboratory is your ideal solution. We perform calibrations that meet national standards, provide full-disclosure test results, and track your instrument’s calibration ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Solar's refurbishment center supplies refurbished gas turbine packages for sale or lease. Solar can extend the life of your turbomachinery to perform better while still achieving the latest standards for efficiency, safety, and ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
Bertin Instruments is committed to taking part in each stage of the product and system lifetime to ensure customer ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Today’s fast-paced, technological environment, requires that quality, throughput, and cost effectiveness are maximized in order for your business to thrive. TEGAM realizes that your test instruments are indispensable to your company and directly affect the success and profitability of your business. Regular evaluation and calibration of instruments with NIST-traceable standards pays ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The mission of Advanced Energy is to deliver consistent value-added service so you can focus on your business. Our highly trained and dedicated Field Service Engineers (FSEs) are ready to partner with you to deliver the right sensing solutions with the best performance and ...
-
PremiumManufactured by Environics, Inc.based in USA
Calibration of Your Environics System. All Environics systems, with the exception of the Series 7000 Zero Air Generator, are calibrated using a NIST (National Institute of Standards and Technology) recognized and traceable primary flow measurement standard, the Sierra Cal-Bench, Serial Numbers #1010, 1069 or 1089 prior to delivery. ...
-
Premiumbased in UNITED KINGDOM
Air quality management refers to the assessment, analysis and mitigation of air quality issues. CERC provides air quality management services to city municipalities, local authorities, national government and agencies, the European Commission, developers and planners. We’ve assessed air quality across cities as diverse as London, Singapore, Tbilisi and Cape Town. CERC has been assisting UK ...
-
Manufactured by Distek, Inc.based in USA
Distek is committed to providing its customers with the most consistent, traceable results needed to satisfy regulatory requirements. Much like our philosophy for designing quality instruments, Distek’s Validation Service Group utilizes highly skilled chemists and technicians that undergo comprehensive training and certification in all aspects of validation services. Our product is our people, ...
-
based in GERMANY
Gain valuable raw materials from old tires: Pyroclean oil, carbon black, spring steel and energy. Through the TFP process, for the first time, it is now possible to extract liquid fuel oil, carbon black, spring steel and incondensable gas from used tires. There is no other process available that can 'dispose' of used tires in a more environmentally-friendly and residue-free manner while at the ...
-
Manufactured by Scania ABbased in SWEDEN
Scania's environmental commitment is to minimise the effects on the environment. This is done in various ways; it is the many small steps that carry our environmental commitment forward. Carbon dioxide and energy efficiency, emission standards, policies, recycling, end-of-life treatment are all part of Scania’s commitment to the environment. To see a product from a life-cycle perspective is ...
-
Manufactured by DRS Laboratories, Inc.based in USA
DRS uses Chlorine Dioxide gas. Procedure validated by NSF International. An alternative to formaldehyde gas, the standard process for the past 35 years. No carcinogens, no residue, no obnoxious odors. Decontamination time less than 3.5 hours. DRS Laboratories’ processes are improved continuously. Decontamination validation is ...
-
by Exposomebased in INDIA
Treatment of Industrial emissions often takes a one-type-fits-all approach. Prevalent ULPA and HEPA filters are limited solutions when it comes to solving industry challenges. Comply consistently with Industrial Emission Standards. Prevent Corrosion of equipment.. Avert health hazards. Effectiveness of treatment should not be prohibitively ...
-
Manufactured by Thermo Electric Instrumentation BVbased in NETHERLANDS
The Thermo Electric Instrumentation laboratory offers a number of services: End-calibration, batch-calibration, set-calibration, adjustment, programming services, verification ...
-
Manufactured by Monitran Ltdbased in UNITED KINGDOM
Every Monitran sensor is individually tested and shipped with a signed and dated test certificate. Calibration is conducted at our factory using a ‘back-to-back’ reference accelerometer excited by a precision frequency-controlled power amplifier, thus giving a traceable performance to UK National Standards. The sensitivity in mV/g for accelerometers and the 4-20mA range for velocity ...
-
Manufactured by Weber Kunststofftechnik GmbHbased in GERMANY
We round off our all-in-one service for the design and construction of plants with our own in-house fully equipped truck fleet, consisting of 11 trucks which are completely integrated into the various operations of our company. Skilled drivers, specially trained to handle our products ensure safe handling during the transport and loading process. The scheduling of the routes, including ...
-
Manufactured by KRAL GmbHbased in AUSTRIA
Each KRAL product is tested at our in-house test facility prior to dispatch. According certificates confirm error-free functionality. Play it safe and have your KRAL products serviced by us regularly. Our service technicians are happy to come to your location and ensure optimum operation. This increases the durability. Unexpected standstills are prevented. ...
-
by SGSbased in SWITZERLAND
ISO 14064 provides industry and government with a set of tools to develop programs aimed at reducing Greenhouse Gas (GHG) emissions. The ISO 14064 standard comprises three parts that respectively inform on: GHG Inventories (Part 1); GHG Projects (Part 2); and act as guidance for validation and verification of GHG Information (Part ...
-
based in UNITED KINGDOM
Pendulum impact testing is used to determine the impact resistance, strength and breakage characteristics of a range of glass items in order to ensure that they are fit for their intended ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you