Air Monitoring Manufacturers, Suppliers & Companies (Monitoring And Testing) Near American Samoa
-
ManufacturerDistributor in Albany, NEW ZEALAND
ERG (Air Pollution Control) Ltd provides specialist industrial air pollution control, gas treatment and odour control packages – turnkey supply of the complete system: design, supply, installation and commissioning – all backed by a process ...
ERG - Spray Towers Scrubbers
Spray Towers are used for low efficiency, low capital cost scrubbing of large particulates and highly soluble gaseous contaminants. Spray towers are especially effective for applications where the inlet contaminants hydrolyse to form difficult to ...
CONTACT SUPPLIER -
Manufacturerbased in Mairangi Bay, NEW ZEALAND
We have been manufacturing compressor units and other equipment since 1986. HPE has its own manufacturing facility to manufacture standard and specialized products for a large amount of applications. With this advantage we are able to use a large ...
-
ManufacturerDistributor in St. Heliers, NEW ZEALAND
AMETEK Process Instruments is a worldwide manufacturer of process analyzers and instrumentation. A business unit of the Process & Analytical Instruments division of AMETEK, Inc., we are part of a global corporation with sales of approximately $5 ...
Thermox - Model WDG 1200 & 1210 Insitu - Flue Gas Oxygen Analyzer with Automatic Calibration & Modbus Output
The WDG 1200/integral electronics Insitu and the WDG 1210/remote electronics Insitu are rugged, reliable flue gas analyzers that use trusted zirconium oxide sensor technology for net oxygen (O2) measurements. The unique sensor design allows the ...
CONTACT SUPPLIER -
ManufacturerDistributor in Auckland, NEW ZEALAND
Multisensor Systems is a developer and supplier of Environmental, Water and Air Monitoring instruments based in the United Kingdom. These includes solutions to: 1) Protect Water Treatment facilities and Waste Water Treatment Works from oil ...
-
ManufacturerDistributor in Penrose, NEW ZEALAND
Sierra Instruments is a global leader in fluid flow measurement and control for nearly 40 years and is known for its high performance flow instrumentation for gas, liquid and steam applications commonly found in the semiconductor, environmental, ...
Sierra FlatTrak - Model 780S-UHP - Ultra High Purity Immersible Thermal Gas Mass Flow Meter
The 780S is North America's #1 selling inline thermal mass flow meter (2009 Flow Research, Boston MA). Our ultra high purity 780S-UHP is the industry-choice for bulk gas distribution service in semiconductor fabs, in pharmaceutical production and ...
CONTACT SUPPLIER -
ManufacturerDistributor in Onehunga, NEW ZEALAND
Bacharach is a global leader in the design, manufacture, and service of combustion gas analysis and refrigeration leak detection and monitoring instrumentation. Bacharach products make the HVACR industries safer, cleaner, and more energy efficient. ...
Leakator® - Model 10 - Combustible Gas Leak Detector
The Leakator® 10 is an ideal instrument for pinpointing combustible gas leaks in a number of residential, commercial and industrial applications, including gas pipeline surveying and valve, regulator and gas meter inspection. It uses a long-life (5 ...
CONTACT SUPPLIER -
Manufacturerbased in Matamata, NEW ZEALAND
Reid & Harrison (1980) Ltd have been in the business of successfully pumping liquid / solid slurries for over 50 years. Bob Dalley took over directorship of Reid & Harrison (1980) Ltd after 20 years working for the company, including a large input ...
Yardmaster Halo - Effluent Monitoring & Control System
YARDMASTER HALO provides next generation monitoring and control of your Dairy Effluent system. The SUPERSMART Monitoring & Control platform can be tailored to match the requirements of your farm and you can choose from a range of additional ...
CONTACT SUPPLIER -
Manufacturerbased in New Plymouth RD2, NEW ZEALAND
Vortex dredge solutions offer the highest suction on the market at 97kpa (28 in/hg) With years of experience servicing the oil and gas industry, we have developed robust and efficient ROV dredging and tooling solutions for a range of clients ...
-
ManufacturerDistributor in , NEW ZEALAND
Starting with an order for a Perceived Noise Level calculator to the Anglo-French supersonic Concorde project in 1967, Norsonic has for 50 years used our technical expertise to develop sound instrumentation of high precision and quality. Combining ...
NorCloud - Noise Monitoring Software
NorCloud is designed to fit your need for noise monitoring. Even if you are a non expert, NorCloud offers you an easy setup of a project with alarms and ...
CONTACT SUPPLIER -
ManufacturerDistributor in , NEW ZEALAND
TEI is a family business located in the Village of Cleves, Ohio. TEI employes skilled personnel who average over 20 years of experience each in the design, manufacture, and support of air pollution monitoring equipment. Our modern well-equipped ...
Model PQ200 - Ambient Air Monitor
The PQ200 is designed to meet exacting criteria for collecting 24-hour samples of ambient 'Fine Particulate,' according to the U.S. National Ambient Air Quality Standards (NAAQS), published July 18, 1997. The Very Sharp Cut Cyclone (VSCC) has ...
CONTACT SUPPLIER -
ManufacturerDistributor in , NEW ZEALAND
Over 30 years experience manufacturing gas detection instruments and sensors. ION Science has over 30 years of industry experience designing, manufacturing, and supplying PID gas sensors, gas detection instruments, and leak detectors for a wide ...
Panther - Model PRO - Gas Leak Detector
This gas leak detector provides rapid and sensitive detection of a wide range of gases including Helium, Refrigerants and ...
CONTACT SUPPLIER -
ManufacturerOffice in , NEW ZEALAND
PermAlert (A division of Perma-Pipe) offers state-of-the-art microprocessor based Fluid Leak Detection System that alarms on contact with liquids and locates potential problems anywhere along the sensing cable. This system is used in Data centers, ...
-
Manufacturerbased in Porirua, NEW ZEALAND
Our story begins in New Zealand in 1975 – we earned our reputation building timber drying kilns, heat exchangers, air pollution control, acoustic silencers, enclosures and industrial heating and combustion engineering. Now with over 100 staff and a ...
Dungs - Gas Control Valves
We are the New Zealand agent for Dungs International Ltd, a leading manufacturer of burner, heating, gas and industrial process components. We sell replacement parts through to complete design and build ...
CONTACT SUPPLIER -
Distributorbased in CURRUMBIN, AUSTRALIA
AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring ...
Quality Services
All systems built in Australia and configured to specified requirements by factory trained engineers. AquaGas Emissions Monitoring Systems meet Environmental Protection Agency’s (EPA) and Clean Air Act monitoring & reporting requirements ...
CONTACT SUPPLIER -
ManufacturerDistributor in CURRUMBIN, AUSTRALIA
Leman Instruments is a leading European company specialized in Gas Generators and Custom Calibrations systems. Three decades of experience in the field of high technology Gas Analysis, Generation and Calibrationenable us to open Leman Instruments ...
Leman - Model HYDRO50L - High Purity Hydrogen Generator
LEMAN-Instruments designed the HYDRO50L product line of High Purity Hydrogen Generators for FID and CARRIER GAS, to fit almost any type of application which needs High purity H2 production close to the consumer in laboratory environment. Based on ...
CONTACT SUPPLIER -
ManufacturerDistributor in CURRUMBIN, AUSTRALIA
SETNAG, an ISO9001 accredited company since 2000, designs and manufactures oxygen analysers for controlling combustion and processes. The products are designed around the efficient MicroPoas™ technology, which perfectly meets the demanding criteria ...
Setnag - Model 2060 - Oxygen Partial Pressure Measurement Analysers
Wide measurement range: from 10-35 to 0.25atm. Excellent response time thanks to the MicroPoas® miniaturized zirconia sensor. Easy and fast ...
CONTACT SUPPLIER -
ManufacturerDistributor in CURRUMBIN, AUSTRALIA
Specialist in gas analysis technologies. Provider of Ankersmid sampling, Gas analysers, Element analyse, combustion analysers, system Integration, Dust monitoring and Liquid analysis. Continuous Emissions Monitoring Systems I Process Gas analysers I ...
Ankersmid - Model ASP 300, ASP 400, ASP 500 - Gas Sample Probe
Due to its modular design and various options, the Ankersmid heated sample probe filters cover the widest range of applications. With a choice of different lengths of heated filter body, a filter element of 150mm length, suitable for most ...
CONTACT SUPPLIER -
DistributorDistributor in CURRUMBIN, AUSTRALIA
a1-cbiss are an ISO accredited, environmental monitoring systems supplier with expertise in the design, manufacture and integration of fixed and portable environmental monitoring solutions: MCERTS accredited Continuous Emissions Monitoring Systems; ...
a1-cbiss - Model MIR-9000-CLD - Multi-Gas Continuous Emissions Monitoring System
a1-cbiss and Environnement S.A have developed a multi-gas continuous emissions monitoring system utilising the Standard Reference Methods (SRM) for the monitoring of NO, N2O, NO2, NOx, CO, CO2 and O2. It also utilises the technology stated in the ...
CONTACT SUPPLIER -
ManufacturerDistributor in Hope Island, AUSTRALIA
For the Industrial industry, Opgal developed the only gas leak detection camera of its kind in the world that has been certified for use in sensitive and hazardous locations according to American and European standards (ATEX, CSA, UL). The ...
EyeCSite - Model 2.0 - Quantification (QOGI) and Alert software for handled OGI cameras for the oil and gas industry
Quantification in leak rate (g/hr) and max concentration (e.g. ppm) values. Realtime & Offline On-location and remote quantitative measurement of leak rates for Methane and VOC's. Multiple Compound Quantification. Calibrated to accurately ...
CONTACT SUPPLIER -
ManufacturerOffice in Carbrook, AUSTRALIA
Erosion Protection Systems (EPS) is an internationally recognised company specialising in the supply and installation of grout filled revetment mattress products for erosion control and flood repair works. With 30 years of experience in this field, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you