Air Monitoring Equipment For Monitoring And Testing Available In Albania
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Compact zero gas system for process and zero gas used in the gas analysis industry. Compressor (Thomas pump type 607CD22) requires no oil. Immediate functional, maintenance-free ...
-
ShowcaseManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
SCI’s sensor division incorporates state of the art sensor technology that has been enhanced with a machine learning calibration system and convenient cloud-based data acquisition platform. SCI sensor products merge with the Internet of Things (IoT), digital electronics, machine learning, and data visualization technologies to deliver precise air quality and meteorological data in ...
-
ShowcaseManufactured by Synspec BVbased in NETHERLANDS
Continuous emissions monitoring system (CEMS) for high-range stack measurements. Synspec Delta 116 is a continuous emissions monitoring system (CEMS) built specifically for high-range stack measurements according to US EPA 25A. The analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ensures that ...
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Parallel measuring of up to 4 particle fraction with only one instrument. With the dust analyser EasyPM dust fractions for PM10, PM2.5, PM1 and TSP can be measured parallel with only one ...
-
ShowcaseManufactured by Ecomesurebased in FRANCE
We spend more than 80% of our time indoors. However, indoor air can be up to eight times more contaminated than outdoor ...
-
ShowcaseManufactured by Mobiltex Data Ltdbased in CANADA
Robust, reliable, and cost-effective temperature monitoring of pipeline assets is now available from MOBILTEX, engineered for performance in even the most extreme and remote locations. The MOBILTEX TS1 configurations enable field technicians to install remote, battery-powered GPS-enabled temperature sensing capabilities that are compatible with our CorTalk RMU1 platforms. Measurement data is ...
-
ShowcaseManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Measure Gases in Ambient and Humid Conditions. Gasmet CX4015 is designed for continuous monitoring applications in ambient conditions, such as workplace air monitoring and quality control applications. It can be used to measure up to 50 components simultaneously, and additional gases can be easily added without any hardware changes. The sample cell can be heated up to 50 °C, which allows ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Compressed gases are viewed as critical utilities in many industries when in direct product contact or in the clean room environment. Control of the environment where Pharmaceutical and Cosmetic products are manufactured is a key element of ISO and GMP Standards worldwide. The absence of viable contamination is considered a critical quality attribute due to its potential to dramatically impact ...
-
PremiumManufactured by Testo, Inc.based in USA
The compact vane anemometer testo 417 in Kit 2 including two measurement funnels and a flow straightener was developed to make it as easy as possible for you to take measurements on air inlets and outlets as well as plate and swirl outlets of air conditioning and ventilation systems. The integrated 100 mm vane quickly ensures precise results. Time and point average values as well as the volume ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model C14CS-3000E Tritium Collection System is a carbon 14 collection system consisting of a diaphragm pump, 12VDC brushless motor, two 500ml NaOH sampling vials with stainless steel caps and an overflow trap. The flow and volume of air passing through the system is adjusted and measured by a microprocessor controlled Digital Flow Meter (DFM). The DFM utilizes a precision-machined orifice to ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
The plant is controlled and policed by an all encompassing supervisory propriety human machine interface based control system. The system will constantly monitor the plants performance and automatically trim and correct any out of tolerance ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Universally applicable gas-tight booster solution with magentic coupling for oilfree conveying. Low-maintenance sealing concept, the separation between oil and process side is achieved by a special piston ring seal Design pressure of 7.0 bar (g) acc. to AD2000 / DIN EN 13445. 16 ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The instrument uses a 6-port valve with a single sorbent trap, and a metallic capillary column. It has a minimum detection level as low as 15 ppt (for 1,3-Butadiene for e.g.) in ambient air, and analyses up to 32 compounds during a single ...
-
PremiumManufactured by Testo, Inc.based in USA
Charge refrigeration systems, ductless mini-splits, and heat pumps faster, more precisely, and automatically with the testo 560i Digital Refrigerant Scale with Intelligent Valve, a testo Digital Manifold and/or the testo Smart App. Simply enter the charging program, target value for superheating, subcooling, weight, and even target superheat in the manifold or App and the scale and valve will do ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model FJ-28BMHT heavy duty hand truck mounted mobile low volume air sampler designed for outdoor use with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4’ to 7’ above floor level. Model FJ-28BMHT contains a standard rotameter for flow measurements. The air sampler is contained in a powder coat painted environmental ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
DMS-100 dust tester is a self-developed portable extraction dust monitor, which mainly adopts measuring technology oflaser forward scattering. The key parts of the product are all imported. The tester extracts dust in stack(flue) into dust measuring chamber for measurement. It owns features of high sensitivity, long maintenance-free time, convenient installation, which be can widely applied in ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
High-temperature hygronom is also called high-temperature moisture meter or high-temperature dew-point meter, which is used to measure the humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration, widely applied in industrial online humidity ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-604DT Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The DF-604DT Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flowrate. The flowrate range attainable through the filter media is dependent upon the air porosity of the filter media. The DF-604DT Series design ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
RA-915AM monitors are designed for continuous mercury measurements in ambient air, indoor air and in natural gas. Ideal for permanent unattended installation at air monitoring stations, RA-915AM monitor for ambient air allows ultra-sensitive measurements of background Hg concentrations and is compliant with the European standard EN 15852 for ambient air ...
-
PremiumManufactured by Testo, Inc.based in USA
Precise, reliable measurement of all air velocity and IAQ parameters with just one measuring instrument – the testo 440 dP. This multifunction measuring instrument is intuitive and easy to use, thanks to its integrated differential pressure sensor and clearly structured measurement menus. Adjusting air conditioning and ventilation systems, monitoring air quality, and carrying out comfort ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you