Air Monitoring Equipment For Monitoring And Testing Available In Canada
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Easy handling and individual customizations. With the analyser EasyCEM gases can be measured such as CO, CO2, NO, SO2, SF6, THC with the NDIR method or with PID , as welll as gases like NH3, HCl and CH4 with a TDLS (tunabel diode laser). By extending further modules with NDUV or electrochemical measuring principles, it is possible to measure gases like O2, O3 or NO2. The analyser is particularly ...
-
ShowcaseManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran 2537 performs continuous long-term, unattended analysis of gaseous elemental mercury with unmatched accuracy, sensitivity, and reliability. The Tekran 2537 is easy to setup, use, and maintain and has long been known for its stable performance in rugged conditions. Our instruments have been installed at both Polar Regions, on ocean research vessels and hundreds of locations in between. ...
-
ShowcaseManufactured by VPInstrumentsbased in NETHERLANDS
With the VPFlowScope® In-line flow meter you have the perfect tool for measuring consumption of machines, cost allocation and pressure loss monitoring. The unique design makes this flow meter especially suited for smaller diameters. It is built for small pipes up to ...
-
ShowcaseManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
Polludrone is a fully integrated outdoor air quality monitoring system that delivers reference equivalent performance. Polludrone is a sensor-based air quality monitoring system for all the critical ambient environmental parameters related to air quality, noise, odour, weather, radiation. In addition, meteorological parameters like wind speed, wind direction, rainfall, flood levels, and ...
-
Showcasebased in USA
Clarity’s flagship particulate matter (PM) and nitrogen dioxide (NO2) monitor is self-powered, FCC/CE certified, UV-resistant, and weatherproof. A truly self-sufficient IoT air quality monitoring system with solar harvesting, internal battery, and global cellular communications, the Clarity Node-S accommodates site-specific requirements according to the customer’s needs, not the other ...
-
ShowcaseManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
The UV-GAS-500 model gas analyzer is based on DOAS technology,able to measure the concentration of gases including SO2,NO2,NO,NH3,CL2,O3,H2S etc,It has features of high measurement accuracy ,outstandingreliablility,fast response time and wide applicable ...
-
ShowcaseManufactured by it4ip S.A.based in BELGIUM
Available in the full pore size range, white and translucent membrane filters having wide and varied applications including air monitoring, water analysis, capture of micro-organism and blood filtration; also available in hydrophilic (PVP treated) or hydrophobic (PVP free) ...
-
ShowcaseManufactured by Elvatech Ltd.based in UKRAINE
ElvaX Plus spectrometer is a desktop energy-dispersive X-ray fluorescence (EDXRF) analyzer with extended element range from Na (Z=11) to U (Z=92). The Helium purge system and the automatic primary filter changer combined with the large area SDD detector are used to allow effective registration of the light elements spectra. ElvaX Plus spectrometer is used for quantitative and qualitative analysis ...
-
PremiumManufactured by Myron L Companybased in USA
We are proud of the trust our handheld water quality instruments and monitor/controllers have earned in the past. Our product line has evolved to a new level of outstanding performance and value in analytical instruments: the Ultrameter II series. While priced like affordable single-parameter instruments, the Ultrameter II does the job of up to seven ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 4001 is a stand alone ozone primary transfer standard able to generate ozone together with dry or wet air (optional) allowing to calibrate the ozone monitors in several points. It generates an outflow of 3 Nl/min air containing 10 to 1000 ppb O3, with stability and reproducibility of the concentration better than 1% relative. The extended range model generates 10 ppb to 10 ppm at 3 ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Ideally suited for aseptic environments, the MiniCapt Remote Microbial Air Sampler simplifies the job of microbial air sampling by applying modern data management capabilities that save time and reduce operator error in air sampling data. The MiniCapt Viable Microbial Sampler uses a unique HEPA-filtered exhaust so it doesn’t contaminate the cleanroom. With a small footprint, the MiniCapt ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Mixing chamber (injection chamber) to inject a known volume of a component to generate a gas mixture with known concentration. The process is the primary standard to generate gas mixtures to calibrate gas analyzers. The development was for the most part carried out by the National EU Clean Air Reference Lab, a division of the Federal Environmental Agency, and is documented in ISO 6144 as a ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Designed to enhance fixed Airborne Molecular Contamination (AMC) monitoring programs, the AirSentry II Mobile AMC Detection System is the first truly mobile system for monitoring airborne molecular contamination in cleanrooms. Mobility plays an important part in a strategic airborne molecular contamination monitoring program, allowing contamination sources to be quickly located, quantified and ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Notable Features: Vacuum Fluorescent Display: (4 lines×24 characters). 4 button key pad for stand alone operation. Mass flow or Volumetric flow. Volume Totalization Feature. Operator selectable Reference T and P. Operator selectable engineering units. Multi gas option. ± 1.0% Full Scale (F.S.) Accuracy. User customizable calibration report. Semi-Automatic calibration-verification ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-6 Micro Air Monitoring System is a small online environmental monitoring system based on high precision(ppb level) gas sensor. It provides flexiable sensor combination scheme and modular design, as well as online monitoring of PM10,PM2.5,SO2,NO2,O3,CO,VOCs,temperature, humidity and other factors in the atmosphere. Special factors can also be qulckly configured according to the actual ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be limited by ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
20 nm Online & Sample Particle Monitoring. Leading-edge microelectronic processes require very clean process chemicals that are highly filtered and regulated to a particle size of 20 nm or below. With 20 nm particle sensitivity, the Chem 20 Chemical Particle Counter from Particle Measuring Systems (PMS) supports the International Roadmap for Devices and Systems (IRDS) and a large variety of ...
-
PremiumManufactured by Testo, Inc.based in USA
The compact vane anemometer testo 417 in Kit 2 including two measurement funnels and a flow straightener was developed to make it as easy as possible for you to take measurements on air inlets and outlets as well as plate and swirl outlets of air conditioning and ventilation systems. The integrated 100 mm vane quickly ensures precise results. Time and point average values as well as the volume ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Mobile calibration system as transfer standard to determine the correction values for losses along the sampling ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Model ST50 is a compact, low cost solution for accurate, repeatable flow rate measurement of air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for installation into pipe diameters from 2.5 inches to 24 inches [63 mm to 610 mm]. It is easily connected into the pipe via a 1/2 inch or 3/4 inch NPT compression ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you