Air Monitoring Equipment For Monitoring And Testing Available In Mongolia
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 822 Mh analyzer is the next generation in high precision two-channel nitrogen oxide measurement. Unique in speed and reliability, the nCLD 822 Mh is modular designed and capable of simultaneously measuring NO, NOx and NO2 from hot and humid gas sources without additional cooler. It features a dual inlet option for assessing two different sources at once. The new and intuitive graphical ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
An all in one solution including dual combined autoGCs FID: airmoVOC C2C6 and airmoVOC C6C12. This solution is provided worldwide for ozone precursors monitoring in ambient air. The airmOzone utilizes the airmoVOC C2-C6 and an airmoVOC C6-C12 with FID to monitor ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot NO is a robust Gas Monitor that can measure Nitric Oxide parameters in the air. AQBot monitors NO concentration in real-time and provides accurate and quick results. Oizom offers a wide range of sensor cartridges that provides a measurement range between 0-1000 ppm. The proprietary gas module senses and measures Nitric Oxide concentration as low as ten ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs GPS-Aided Inertial Navigation System (INS-DM) is the latest version of Inertial Navigation System, developed by Inertial Labs. The INS-DM is the result of over 20 years of our experience in developing and supplying INS solutions to land, marine and aerial platforms around the ...
-
PremiumManufactured by Jacobi Groupbased in SWEDEN
Activated carbon products designed for the oil and gas industry, covering water treatment, vapour treatment, and process applications in petrochemical ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Compact system for PC-controlled multipoint multi-component span gas generation for up to 25 l of span gas / hour. Up to 8 gases can be mixed into one span gas. An ozone generator can be integrated to generate ozone span gas or for gas phase titration with ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The F&J Mini-Calibrator is a small, lightweight microprocessor controlled instrument with sophisticated electronics that measures and displays flow rate corrected to a reference T and P, barometric pressure and air flow temperature. The Mini-Calibrator, which is an exclusive F&J design, is a direct reading instrument utilizing a bright LED with large characters that are easily viewed by ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Sorbent traps provide total mercury measurement as well as speciated mercury measurement (oxidized and elemental mercury phases). The flue gas sample is collected using a heated sample probe and calibrated pumping system. Mercury is captured by adsorption in sorbent traps media. The material in these traps is later analyzed using Zeeman mercury analyzer RA-915M and PYRO-915+ attachment. Traps are ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Andros 6552 gas analyzer is available with two gas channels and can be applied to any type or combination of refrigeration systems that employ FreonsTM and carbon dioxide. Ability to measure up to five gases. Rapid warm-up. Highly accurate calibration. Simple and fast system integration. RS232 or USB ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
μStat ECL is a portable BiPotentiostat/Galvanostat combined with a specific ElectroChemiLuminescence (ECL) Cell that performs Electrochemiluminescence studies with DropSens Screen-Printed Electrodes (SPEs). Electrochemical and Chemiluminescence responses are perfectly synchronized and shown in real time. The equipment can also be used independently as a ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Carbon filtering is a method of filtering that uses a bed of activated carbon to remove contaminants and impurities, using chemical adsorption. Each particle, or granule, of carbon provides a large surface area, or pore structure, allowing contaminants the maximum possible exposure to the active sites within the filter media. One gram of activated carbon has a surface area in excess of 3,000 m2 ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope® In-line is the ideal flow meter for point of use consumption measurement. It measures mass flow, temperature, pressure and totalized flow simultaneously and in both directions. The VPFlowScope In-line is perfect for smaller diameters where it produces all the data you need to optimize your compressed air consumption. With the VPFlowScope® In-line you don’t only see ...
-
PremiumManufactured by Innovation nilu ASbased in NORWAY
The NILU filter holder system is designed for sampling of particles and gaseous compounds on impregnated filters in air pollution measurements. It includes an open face version, which can be used with several successive stages of filters. The aluminium version is designed to sample microplastics and other compounds sensitive to polycarbonate. Filters with different pore size or impregnating ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The PermaCal has been developed in collaboration with the METAS (Swiss Federal Institute of Metrology). The most complex configuration consists in a double stage dilution and permeation system. The device can be available in a portable or rackable casing. The portable version is equipped with a battery and an internal pump with dryer that will provide flow to the permeation oven during the ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
K33 ELG 10,000ppm CO2 + RH/T Data Logging Sensor. The K33 ELG (environmental logger) is designed to log up to 10,000ppm (1%) carbon dioxide, temperature, and % relative humidity in ambient air. Because of its ultra-low power requirements, it can “wake up”, take a sample, store the data in memory, and go back to sleep. Using battery power only, the sensor can be placed in the field for ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty-five years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. The accuracy and repeatability make them the unit of choice for source testers around the world. ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model DF-1 portable air sampling system with a digital flowmeter is a low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 811 M is the next generation in two-channel emissions monitoring instrumentation. Unique in speed and reliability, the nCLD 811 M is modular designed and allows the continuous and simultaneous analysis of NO, NO2 and NOx in raw exhaust gasses with NOx concentrations ranging from several thousand ppm down to a ppb. Its graphical user interface “GUI“ also individually displays ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Y type Strainer is the most cost effective, Y strainer uses perforated wire mesh or wedge wire to trap unwanted solids from a process stream. Y strainer can be mounted vertically or horizontally in a piping system Strainers are low-cost solutions to large nominal bore straining ...
-
Premiumbased in USA
The Clarity Wind Module measures the 2-dimensional horizontal components of wind speed and direction, providing you better insight into where air pollution is coming from - and where it is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you