ambient air quality monitoring Equipment available in Pakistan

Available in Pakistan| Near Pakistan
41 Results found

We couldn't find any ambient air quality monitoring equipment in Pakistan

Here is a list of results available in Pakistan

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Air Monitoring ×

  • Keyword: ambient air quality monitoring ×

  • Available in: Asia & Middle East ×

  • Available in: Pakistan ×

Ecotech - Ambient Air Quality Monitoring Systems

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

Ecotech’s air monitoring systems are custom designed to best meet each application’s unique demands. We talk to our customers about their specific needs and tailor the ambient air quality monitoring system accordingly. For instance: A customer of ours requires a system in a warm environment, where power costs for air conditioning are a ...

Opsis - Model DL256 - Data Logger (AQM)

by Opsis AB     based in Furulund, SWEDEN

OPSIS data logger system is designed for data acquisition applications. The data logger can handle analogue and digital input and output signals as well as serial communication. The hardware of the DL256 is based on modules. It is therefore easy to configure the system to meet a wide range of requirements, and the system can be upgraded by adding ...

Environnement S.A. - Model MGC 101M - Multi-gas Calibrator for Ambient Air Gas Analyzers

by Environnement S.A     based in Poissy, FRANCE

MGC 101 Multi-gas calibrator for ambient air gas analyzer calibration allows: Automatic calculation of dilution and span gas flows, based on commanded concentration, eliminates the need for any manual computation and allows rapid transition from point to pointInternally-stored mass flow controller calibration data improves accuracy (factor of ten) ...

Tekran - Model 1120 - Standard Addition Controller

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1120 Standard Addition Controller allows both standard additions and blanks to be performed at user programmed intervals while using the Model 2537 Mercury Vapor Monitor. Standard additions are accomplished by timed activation of the Model 2537 internal calibration source and zero air selector valves. Standard additions can be ...

Environnement S.A. - Model AS32M - Analyzer for Quick and Direct (Without Conversion) NO2 Monitoring

by Environnement S.A     based in Poissy, FRANCE

Designed to alleviate potential disadvantages of the chemiluminiscence method and to provide the most accurate value for NO2 concentration measurements.

Environnement S.A. - Model O342M - UV Absorption Ozone Analyzer

by Environnement S.A     based in Poissy, FRANCE

Provides accurate O3 low level monitoring measurements in the range of 0-10 ppm. Ultra compact and lightweight – rackable 19'/3U. UV absorption technology. SMD enhanced electronics. Compliance with ISO 13964 and EN 14625. NEW: Built-in serial interface (RS 232 / RS 422), USB & TCP/IP connectivity. NEW: on board web server compatible with ...

Ecotech - Model Serinus 10 - Ozone Analyzer

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 10 Ozone (O3) analyser delivers precise and reliable performance at excellent value. It uses proven non-dispersive ultraviolet (UV) absorption technology to measure O3 in ambient air (LDL 0.5 ppb, range 0-20 ppm).

Ecotech - Model Serinus 55 - Hydrogen Sulphide (H2S) Analyzer

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 55 Hydrogen Sulphide analyser (H2S) analyser delivers precise and reliable performance at excellent value. It uses proven UV fluorescent radiation technology and an internal thermal catalytic converter to measure H2S in ambient air (LDL

Ecotech - Model Serinus 44 - NO/NO2/NOX/NH3 Multi Gas Analyzer

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 44 analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology and an external thermal catalytic converter to measure NO, NO2, NOxand NH3 in ambient air (LDL 0.4ppb, Range 0-20ppm). The Serinus range of analysers has been designed using our experience and knowledge gained from ...

Ecotech - Model Serinus 56 - Total Sulphides Analyser

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 56 Total Sulphides analyser delivers precise and reliable performance at excellent value. It uses proven UV fluorescent radiation technology and an external thermal converter to measure TS in ambient air. The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality ...

Ecotech - Model Serinus 51 - SO2/H2S Analyser

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 51 analyser delivers precise and reliable performance at excellent value. It combines pulsed fluorescence detection with an internal catalytic converter to sequentially measure H2S and SO2 in the range of 0-2/0-20 ppm respectively with a detection limit of 0.3 ppb. The Serinus range of analysers has been designed using our experience ...

Ecotech - Model Serinus 30 - Carbon Monoxide Analyser

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 30 Carbon Monoxide analyser delivers precise and reliable performance at excellent value. It uses proven NDIR gas filter correlation technology to measure CO in ambient air (LDL 40 ppb, range 0-200ppm).

Ecotech - Model Serinus 57 - Total Reduced Sulphides Analyser

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 57 Total Reduced Sulphides analyser delivers precise and reliable performance at excellent value. It uses proven UV fluorescent radiation technology and a thermal converter to measure TRS in ambient air (LDL 0.3ppb, Range 0-10 ppm). TRS is measured by converting TS to SO2 using the external HTO1000 converter and then measuring the ...

Ecotech - Model Serinus 40 - Oxides of Nitrogen Analyser

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 40 Oxides of Nitrogen analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology to measure NO, NO2 and NOx in ambient air (LDL 0.4 ppb, range 0-20 ppm).

Aeroqual - Model AQM 65 - Ambient Air Monitoring Station

by Aeroqual Ltd     based in Mount Eden, NEW ZEALAND

The AQM 65 is a fully integrated air monitoring station that delivers ‘near reference’ levels of performance. The size of a large suitcase it can measure up to 20 different gaseous and particulate pollutants and environmental parameters simultaneously. The AQM 65 offers the optimal balance between performance and price – ...

Dichotomous - Model PM10/2.5 - Sampler

by Thermo Scientific - Air Quality Instruments     based in Franklin, MASSACHUSETTS (USA)

The manual dichotomous sampler is used for routine compliance montoring for PM10 and PM2.5. The Dichotomous sampler operates at a flow rate of 1 CHM (16.7 LPM) and is available with built-in mechanical 6-day or 7-day times, or an electronic digital programmable timer.

Model 2000 - Partisol FRM

by Thermo Scientific - Air Quality Instruments     based in Franklin, MASSACHUSETTS (USA)

The Partisol-FRM Model 2000 Air Sampler is USEPA reference method designated for both PM-2.5 and PM-10. It is the proven manual sampling platform for the USEPA PM-2.5 standard. It is based upon the original Partisol Air Sampler, which received the USEPA reference designation for PM-10 measurements in June 1994.

TAPI - Model T751 - Portable Zero Air System

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The Model 751 is a fully self-contained portable source of clean, dry air for use with dilution calibrators. It removes particulate and potential interferents from ambient air to create zero air suitable for calibration. It can also be used to provide purge air for permeation tube ovens.

DeltaCal - Model DC1/DC100 - Calibrator for Federal Reference Method Samplers

by Keika Ventures, LLC (KV)     based in Chapel Hill, NORTH CAROLINA (USA)

BGI's DeltaCal is the first and only continuous volumetric flow calibration/audit device which gives a direct indication of volumetric flow rate, standard flow rate, barometric pressure (both mm/Hg & mb), ambient temperature and filter temperature in one instrument. It was developed for use with U.S. EPA PM2.5 designated samplers and their PM10 ...

CES Xact - Model 625 - Real-Time Ambient Metals Monitoring System

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The CES Xact 625 system is designed for monitoring ambient air near the fence lines of industrial facilities and in complex urban environments, where particulate matter and metal concentrations are elevated. The system uses reel-to-reel (RTR) filter tape sampling and nondestructive X-ray fluorescence (XRF) analysis to monitor ambient air. The air ...

Need help finding the right suppliers?

Let the XPRTs do the work for you