atmospheric monitoring Equipment

26 Results found
Only show results in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Air Monitoring ×

  • Keyword: atmospheric monitoring ×

Model PCO2 - Atmospheric Air Kit

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

Kit includes 250 feet (85m) 3/8 inch (9.5mm) composite tubing, a rain guard and connectors.

HORIBA - Model APHA-370 - Ambient THC Monitor / Ambient Air Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The APHA-370 continuously monitors atmospheric THC, NMHC, and CH4 concentrations using a cross-flow modulated selective combustion type method combined with a hydrogen ion detection method. The APHA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy.

TunnelTech - Model 205 - NO2 Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The CODEL TunnelTech 205 NO2 Air Quality Monitor is a highly efficient transmissometer configured for the continuous measurement of Nitrogen Dioxide in road tunnel atmospheres. This extremely stable and reliable monitor incorporates a high-power blue LED to utilise the capacity of nitrogen dioxide to absorb UV and blue light to provide accurate ...

TunnelTech - Model 203 - CO & NO Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The TunnelTech 203 Air Quality Monitor, is an essential part of any road or rail tunnel safety system. Firstly, it monitors the atmosphere within the tunnel and ensures that the tunnel ventilation system provides sufficient clean air to protect tunnel users health and for drivers to clearly see the road ahead. The TunnelTech 203 analyser uses well ...

TunnelTech - Model 204 - Visibility Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The TunnelTech 204 Air Quality Monitor, is an essential part of any road or rail tunnel safety system. Firstly, it monitors the atmosphere within the tunnel and ensures that the tunnel ventilation system provides sufficient clean air to protect tunnel users health and for drivers to clearly see the road ahead. The TunnelTech 204 analyser uses well ...


AQMesh - low cost outdoor air quality monitor

by AQMesh     based in Stratford-upon-Avon, UNITED KINGDOM

AQMesh is the only commercially available and proven low-cost system for monitoring air quality. The product combines a robust hardware platform with the latest sensor technology and GPRS communication, cloud-based data processing and online access. AQMesh pods are manufactured in the UK to the very high standard demanded by users in the other ...

AQMesh - High Sensitivity (ppb) Air Pollution Monitoring System

by Air Monitors Ltd.     based in Severn Drive, Tewkesbury, UNITED KINGDOM

AQMesh is a high sensitivity (ppb) air pollution monitoring system designed as a single monitor or a network of arrayed monitors to measure NO, NO2, O3, CO, SO2, temperature, humidity and atmospheric pressure. AQMesh allows air quality to be monitored in the exact locations that need to be monitored rather than where equipment can be ...

Model 092 - Barometer Pressure Sensor

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The 092 Barometric Pressure Sensor measures absolute atmospheric pressure and converts it into a linear, proportional voltage, using digital computer technology. The 092 features robust, low maintenance construction that will withstand a wide-range of adverse weather conditions, and consistently collects reliable barometric pressure data.

Environnement S.A. - Model AS32M - Analyzer for Quick and Direct (Without Conversion) NO2 Monitoring

by Environnement S.A     based in Poissy, FRANCE

Designed to alleviate potential disadvantages of the chemiluminiscence method and to provide the most accurate value for NO2 concentration measurements.

Model 110E - Multistream VOC Analysis Systems

by PCF Elettronica S.r.l.     based in Levate (BG), ITALY

The measuring system foresees a rotation automatic sampling valve, that introduces into the analytical circuit about 0.6 ml of sample gas, balanced against atmospheric pressure in order to guarantee repeatable samples. Everything is assembled in a temperature controlled environment. Sample is sacked by an air ejector located at the back of the ...

Continuous Emissions Monitoring System (CEMS)

by Loccioni Group     based in Angeli di Rosora (AN), ITALY

Loccioni Environment provides complete systems for monitoring continuous industrial emissions in the atmosphere (CEMS): Interfacing with the bodies dealing with law limits control, it affords turnkey solutions, fixed or transportable CEMS, complete with data acquisition and processing software, for plants of any size.

ENVI-Air - Operating Gas Analyzer

by Environics     based in Mikkeli, FINLAND

The ENVI-Air from Environics is a continuously operating gas analyzer designed for ultra-low level detection of either single or multi-component hazardous gases in ambient air.  It will operate indoor or outdoor in the harshest environmental conditions and needs little or no maintenance.  ENVI-Air is based on IMS or GC-IMS ...

Model AS32M - Aanalyzer for Quick and Direct (without conversion) NO2 Measurement

by Norditech Pty Ltd     based in Arndell Park, AUSTRALIA

Designed to alleviate potential disadvantages of the chemiluminiscence method and to provide the most accurate value for NO2 concentration measurements. Direct and continuous monitoring of ambient NO2. Provides fast and accurate measurements. Extremely compact, easy to use with minimal maintenance (periodic change of particle filter). Completely ...

Model 101D2 - Portable Oxygen Monitor

by Analox Sensor Technology     based in Stokesley, UNITED KINGDOM

This time-served, classic, battery powered oxygen monitor is easy to operate and adjust alarms and can even be calibrated using fresh air.  If you’ve operated a few different HBOT chambers in the last 20 years you’ve probably seen a 101D2 in action.

Model CEMS - Emission Monitoring Systems

by Orbital     based in Staffordshire, UNITED KINGDOM

Often, emission monitoring systems can be prone to faults, with unstable systems being built which allow particulates to be incorrectly filtered and high water vapour levels/corrosive components being left in the gas stream. This can not only damage the system, causing long term problems, but also create an unreliable sample. At Orbital, we use ...

AIRFLOW - Air Velocity and Direction Monitor for Tunnels

by Tunnel Sensors Limited     based in Crowfield, UNITED KINGDOM

The AIRFLOW tunnel monitor uses proven ultrasound technology to measure the speed and direction of air movement within the tunnel environment. These measurements can be used as part of an air quality management system for ventilation control wihtin a tunnel or other confined space including traffic tunnels, rail tunnels, cable tunnels as well as ...

05305-L R. M. Young Air Quality Wind Monitor

by Campbell Scientific, Inc.     based in Logan, UTAH (USA)

The wind monitors are lightweight instruments that measure wind speed and direction. Manufactured by R. M. Young, the wind monitors are cabled for use with our dataloggers. The wind monitors' design emphasizes simplicity and lightweight construction. They are made out of rigid, UV-stabilized thermoplastic with stainless-steel and anodized-aluminum ...

Model 3000SI - Aerospace

by Analox Sensor Technology     based in Stokesley, UNITED KINGDOM

The 3000SI range offers a comprehensive offering of robustly housed Zone 0 rated analogue sensors ideal for integration into aerospace breathing air or atmosphere monitoring system.

GasAlertMicroClip - Model XL Series - Multi Gas Detectors

by Honeywell Analytics     based in Hegnau, SWITZERLAND

The GasAlertMicroClip provides affordable protection from atmospheric gas hazards. Its simple, durable and compact design make it the easiest four gas monitor to wear, allowing workers to focus on the job at hand without feeling weighed down.

PCA - Model PEN3 - Portable Gas Detection - Electronic Nose

by PCA Technologies SRL     based in Parabiago, ITALY

PEN3 is the essential electronic nose for food and pharmaceutical industries (quality control purposes as well as for environmental monitoring (recognition of emission sources). It is a small, fast and robust identification system for gases and gas mixtures. Gas detection is performed with an array of gas sensors. Single compounds or mixtures of ...

Related Terms for atmospheric monitoring

Need help finding the right suppliers?

Let the XPRTs do the work for you