We couldn't find any carbon monoxide monitoring equipment suppliers or service providers located in Rhode Island
Here is a list of equipment results with suppliers serving Rhode Island
Carbon Monoxide Monitoring (Air Monitoring) Equipment Available In Rhode Island
-
Manufactured by Pioneer Air Systemsbased in USA
A carbon monoxide monitor is strongly recommended by OSHA and CSA for all breathing air applications. The Pionox Carbon Monoxide (CO) Monitor is designed to meet the OSHA and CSA standards for the detection of carbon monoxide in compressed air systems. The Pionox ...
-
Manufactured by KWJ Engineering, Inc.based in USA
SPARROW is a health and safety device that measures and alarms to high and low levels of carbon monoxide (CO), along with temperature, ...
-
Manufactured by Eco Sensors Division of Interlink Electronics, Inc.based in USA
SPARROW is a smart phone connected carbon monoxide monitor for CO safety and air quality analysis. SPARROW and the SPARROW app work together to monitor CO in real-time and provide both high level safety alerts and low-level air quality ...
-
based in USA
Introducing the new MIRA Pico CO/N2O portable analyzer from Aeris Technologies, Inc. The Pico CO/N2O analyzer is a giant leap forward in gas sensing : sub-ppb sensitivity, CO measurement displaying an absolute accuracy at the ppb level without the need for temperature control, no calibration required, real time and autonomous operation, extreme linearity over multiple decades of concentration, ...
-
Manufactured by PureAire Monitoring Systems, Incbased in USA
supervised 24/7 and when used in conjunction with distributive control systems or PLC’s, provides immediate fault identification for a disconnected sensor cell. The Air check Ex is housed in a Nema 7 explosion proof enclosure and is available for Carbon Monoxide, IPA, H2, H2S and other toxic gases. Capable of monitoring ppm levels of toxic ...
-
Manufactured by Environmental Sensors Companybased in USA
Environmental Sensors Co.'s Carbon Monoxide Meter is a portable desktop instrument that measures carbon monoxide concentration in a range of 0-300 ppm and a resolution of 0.1 ppm. The instrument makes it possible to monitor carbon monxide vapor in air. The insturment has an LCD display giving ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The First Responder is a combustible gas indicator designed for emergency response technicians in the gas industry. The First Responder detects flammable gas at PPM, LEL and % Vol levels with the addition of carbon monoxide for internal atmosphere monitoring. An optional external range diffusion probe with high speed semiconductor sensor ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A compact, reliable multi-gas analyser for measuring flue gas emissions in processes burning natural gas and biomass. The FGA provides accurate, reliable measurement of carbon monoxide, nitric oxide and oxygen in flue gases. It is an integrated solution for Continuous Emissions Monitoring Systems (CEMS) applications in smaller combustion ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot CO is a robust CO Gas Monitor that can measure Carbon Monoxide parameters in the air. This CO gas detector uses Electrochemical Sensing technology to measure total CO concentration in the air. The monitor is equipped with a CO sensor module. The sensor module is enclosed in the IP65 rugged composite enclosure to protect ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The Polludrone Lite is a low-cost air quality monitor specially developed to monitor common air polluting parameters at outdoor spaces. The device is cost-effective, it becomes feasible to deploy the devices in multiple locations. The lite version is specially designed for users who want to perform indicative air quality monitoring. It is an ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Based on the Clean Air Act as well as local regulations, increasingly stringent environmental regulations require the overall reduction of Sulfur emissions. Consequently, it is necessary to monitor and control specific sulfur constituents and total sulfur content in products that are combusted and emitted. Siemens on-line MAXUM Process ...
-
Manufactured by KWJ Engineering, Inc.based in USA
The KWJ 316/310 Carbon Monoxide (CO) Monitor and Alarm is a 115 VAC dust-resistant instrument that can be surface mounted as closely as possible to the air supply, but outside a classified hazardous area. It continuously monitors a compressed air sample and gives an alarm when CO in the sample exceeds a preset level. It indicates ...
-
Manufactured by Aero-Laser GmbHbased in GERMANY
The AL5005 is an ultra fast carbon monoxide (CO) monitor with an unique sensitivity below 1ppb (parts per billion). The AL5005 is specially designed for the application in air-planes, where a high time reolution results in a high spatial resolution. The detection of CO is based on a VUV-fluorimetry, employing the excitation of CO at 150 ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
Using gas filter correlation technology, the Model 48i-HL measures the amount of carbon monoxide in the sample. The Model 48i-HL is based on the principle that carbon monoxide (CO) absorbs infrared radiation at a wavelength of 4.6 microns. Because infrared absorption is a nonlinear measurement technique, it is necessary for the ...
-
Manufactured by Air-Cure Incorporatedbased in USA
Coal becomes unstable when its moisture content falls below equilibrium. Coal dust is the most unstable form of coal, because its moisture cannot be retained. When there is a reduction in moisture content, the oxidation process is accelerated generating ignition temperature heat and carbon monoxide (CO). If measures are not taken to ...
-
Manufactured by GfG Instrumentationbased in GERMANY
One of GfG';s latest products is the 9025-XPS fully portable compressed air monitoring system. The 9025-XP is the unit of choice where specific and accurate measurement of carbon monoxide and oxygen levels are required. Designed to meet OSHA requirements for monitoring of Grade D respirable air, this unit is equipped with ...
-
Manufactured by Picarro, Incbased in USA
Generate precise, aircraft-based measurements of the two main greenhouse gases. Available with or without ...
-
Manufactured by Redkoh Industries, Incbased in USA
The Model DT 3008 measures total combustibles or carbon monoxide by using an eduction pump to draw a sample from a process stack or duct to present it to a sensing cell. The cell is a platinum catalytic bead sensor. The sensor chosen depends upon the accuracy and the measurement levels required, and whether total combustibles or carbon ...
-
Manufactured by Teledyne APIbased in USA
The Model T102 TRS analyzer uses the proven UV fluorescence principle to measure Total Reduced Sulfur at levels commonly required for ambient air monitoring. The Model T102 uses a high temperature external converter set at 850°C to allow conversion of H2S, methyl mercaptan, dimethyldisulfide, and methyl-disulfide to SO2 at this ...
-
Manufactured by GfG Instrumentationbased in GERMANY
The RAM 4021 AutoCal; series is the unit of choice where specific and accurate measurement of carbon monoxide, oxygen or dew-point levels are required. Designed to meet OSHA requirements for monitoring of Grade D respirable air, this unit is equipped with a reliable electrochemical sensor that accurately indicates the level of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you