dust sensor Equipment

37 Results found
Only show results available in Virginia?
  • Category: Monitoring & Testing ×

  • Subcategory: Air Monitoring ×

  • Keyword: dust sensor ×

Model SPX50 - Dust Sensor

by Sefram     based in Templemars, FRANCE

The SPX 50 is a sensor, which is based on the tribo-electricity principle. It can be used for dust rejection detection and monitoring.

Model FDS 15 - Fine Dust Sensor

by Dr. Födisch Umweltmesstechnik AG     based in Markranstädt, GERMANY

The fine dust sensor FDS 15 is an optical sensor for continuous measurement and control of fine dust contents. An integrated dust precipitator can be used optionally for the analysis of respirable particle fractions  (PM2,5).  The determination of the dust content in the FDS 15 is based on the method of scattered light measurement. The ...

Model TM-F - Low-Cost Dust Measuring Sensor

by Helmut Hund GmbH     based in Wetzlar, GERMANY

Low-cost Dust measuring sensor TM-F - Emission monitoring in air ducts of filterplants

Thermo Scientific TEOM - Model 1405 - Continuous Ambient Particulate Monitor

by Air Monitors Ltd.     based in Severn Drive, Tewkesbury, UNITED KINGDOM

The 1405 TEOM Continuous Ambient Particulate Monitor measures PM-10, PM-2.5, PM-1, or TSP mass concentrations and consists of a TEOM mass sensor and control unit in a network ready configuration. The TEOM 1405 distinguishes itself from other PM measurement methods by utilizing a direct mass measurement that is not subject to measurement ...

Thermo Scientific TEOM - Model 1405-F - FDMS Monitor

by Air Monitors Ltd.     based in Severn Drive, Tewkesbury, UNITED KINGDOM

The 1405-F TEOM FDMS Monitor measures PM-10, PM Fine (PM-2.5) and PM-1 mass concentrations. Consisting of a Filter Dynamics Measurement System (FDMS) and TEOM mass sensor housed in a single-cabinet and network-ready configuration that includes control system with touch-screen user interface.

Model SPX 150 - Dust Emission Monitoring Probe

by Sefram     based in Templemars, FRANCE

The SPX 150 is based on the tribo-electricity principle. It detects, warns, records and can be used for dust threshold. rejection trend analysis, from a 0.1  mg/m3 dust

AirBoss - Model 200W - Microprocessor-Based, Linear Air Velocity Sensor

by Rel-Tek Corporation     based in Monroeville, PENNSYLVANIA (USA)

The AirBoss 200W is a microprocessor-based, linear air velocity sensor with a range of 0-2000 fpm. Quality constructed of plastic and SS to perform in dusty and corrosive underground nuclear waste storage sites, this is a serious product that has no moving parts and is easy to use. Power is from 14-30VDC, 130ma max, three wire hookup. It has a ...

Model TR1 - Temperature/rel.Humidity Combi Sensor

by Adcon Telemetry GmbH     based in Klosterneuburg, AUSTRIA

Extremely accurate and robust combi-sensor for air temperature and humidity

Model 21512 - Pneumatic Miniature Type Sensor

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Model 21512 Pneumatic Sensor is a fixed gap nozzle, designed primarily for use with non-polarizing films such as polyethylene. This sensor detects the edge position pneumatically and transmits this information to a pneumatic-hydraulic controller.

EPAM - Model 5000 - Environmental Particulate Air Monitor

by Environmental Devices Corporation (EDC)     based in Plaistow, NEW HAMPSHIRE (USA)

An affordable, easily deployable, and portable air monitor designed for measuring trace level for ambient air pollution. The unique sampling design allows for real-time data and filter gravimetric analysis utilizing the FRM 47mm Cassette located directly behind the optical sensor. EPAM-5000 offers a weather tight carrying case, temperature ...

Model EQ-500 series - Trigonometric Sensors

by Panasonic Electric Works Europe AG     based in Holzkirchen, GERMANY

The EQ-500 series is a reflective photoelectric sensor with a compact design. Background and foreground suppression (DC types) and a long sensing range of  up to 2.5m is characteristic of this sensor. Even in harsh environments prone to water or dust stable sensing is possible.EQ-500 series can be used to confirm the passage of ...

TRIBO.d2 - Model 3400 - Emissions Monitor System

by Pennvint     based in Union, NEW JERSEY (USA)

Two-wire (loop powered), 4-20mA output, emissions monitor The TRIBO.d2 is a two wire, loop powered, emissions monitor for high or low tempera- ture applications, designed to detect and locate impending filter malfunctions for indus- trial dust collectors, large and small. These industrial hardened monitors function by processing and analyzing ...

Model AA-3500 - Airborne Particulate Monitor

by Environmental Devices Corporation (EDC)     based in Plaistow, NEW HAMPSHIRE (USA)

Air-Aide Model AA-3500 Airborne Particulate Monitor provides accurate and instantaneous display of concentration readings on lung damaging particulates and aerosols. AA-3500 is a portable handheld survey tool for measuring lung damaging particulate matter. The unique sensor design has applications in indoor air quality (IAQ), HVAC, environmental ...

Digitroll - Model CalibraFlow - Blockage Monitoring Systems

by Digitroll Kft     based in Hajduszoboszlo, HUNGARY

Blockage monitoring the easiest way! Seed Master Flow Calibra monitor was developed targeting highest operator comfort with the least necessary interactions. Seed-flow calibration is a one-button-push process. When automatic speed tracking is installed, no alarms disturbs at headlands where seed rate is lowering due to reduced ground speed ...

Model SS20.250 - Flow Sensor

by PEDAK meettechniek BV     based in Heythuysen, NETHERLANDS

For ventilation, air-conditioning, cleanroom and pharmaceutical applications. In many applications, direct measurement of the flow velocity and of the volumetric flow in air and gases is the ideal solution. Owing to the high requirements in modern control technology, the flow sensor used must be able to detect precisely and quickly over an ...

MTX - Model FAR019xx - Combined Air Temperature and Relative Humidity Sensor

by MTX Srl     based in Campogalliano (MO), ITALY

The sensor combines in a single body the air temperature and the relative humidity transducers which makes it compact and cost saving. The sensor body is made of anodized aluminium corrosion resistant. The protection shield is made of polycarbonate added with glassfiber, material with high resistance to ultraviolet radiation and atmospheric ...

PrimeFilm - Model 120 Pro - CCD Sensor

by Pacific Image Electronics Co. Ltd.     based in New Taipei City, TAIWAN

With the new PrimeFilm 120, we have built the same functionality and quality you have come to expect from our dedicated 35mm film and negative scanners, and extended it to include a wide variety of professional film formats. It also includes Magic Touch, our unique and patented technology for automatically removing dust and scratch damage from ...

MTX - Air Temperature Sensor

by MTX Srl     based in Campogalliano (MO), ITALY

The sensing element is based on a Pt100 transducer (platinum thermoresistance) with response curve according to the class 1/3 DIN – 43760 standard and is mounted on the top of a cylindrical support screwed to the sensor body. The cylindrical support is made of plastic material in order to minimize heat transfer from the base towards the ...

Model LCTR 903 - Lowcost Gas Transmitter

by ADOS GmbH     based in Aachen, GERMANY

The gas transmitter ADOS LCTR 903 is suitable for the detection of combustible gases, for example hydrogen, methane (natural gas) or propane / butane (LPG) in air in the LEL region. Two transmitter versions with different output signals are available:

FT - Model FT702LM - Ultra-Compact Anemometer wind sensor

by FT Technologies Ltd.     based in Middlesex, UNITED KINGDOM

The FT702LM is an ultra-compact anemometer which uses our patented Acu-Res airflow sensing technology to measure accurately both wind speed and direction. Our OEM (Original Equipment Manufacturer) wind sensor is designed for integration into a wide range of engineering systems. The LM2 Version includes an electronic compass.

Need help finding the right suppliers?

Let the XPRTs do the work for you