Only show results in Virginia? Ok

emissions sampling Equipment

  • Premium

    Cellulose HPTLC Plates

    Cellulose is an organic sorbent, which is particularly suitable for the separation of hydrophilic substances by partition chromatography. EMD Millipore’s high-quality cellulose plates include classical TLC or HPTLC grades, and facilitate a wide range of separations. Both plates are available with or without a special fluorescent indicator, ...

    By MilliporeSigma based in Bellefonte, PENNSYLVANIA (USA). from Analytics and Sample Preparation Product line

  • Premium

    ETG - Model UVEGA - Emission Monitoring System

    The heart of the UVEGA system is based on charge capacitor diode array (CCD) technology. The fundamentals of the system’s operation is simple. First, ultra-violet light is generated from some type of source, usually either a deuterium or xenon lamp. The light is collected and concentrated using special optics. The concentrated light then ...

    By ETG Risorse e Tecnologia based in Montiglio, ITALY. from Emission Monitoring Product line

  • Premium

    ETG - Model SCRM 110 - Emission Monitoring System

    One of industrial systems to reduce the emission of hydrochloric acid is the use of the wet scrubber. In counterflow to the exhaust gases is counterbalanced by a flow of water that will react with the HCl in the gas phase by reducing or eliminating the emission into the air of this dangerous gas. To verify the efficiency of the wet scrubber is ...

    By ETG Risorse e Tecnologia based in Montiglio, ITALY. from Emission Monitoring Product line

  • Texas Sampling - Detector Tube Sample System

    Texas Sampling, Inc. Detector Tube sample system is used to take a relative emission free sample safely. To do this, our system drops the pressure to 5 PSIG or less. The large cylinder (top right) is used as a low pressure accumulation chamber that the gas flows through. The Drager tube is inserted in the top fitting to the right of the cylinder ...

    By Texas Sampling, Inc. based in Spartanburg, SOUTH CAROLINA (USA).

  • Premium

    Gasmet - Model CEMS II - Continuous Emissions Monitoring System

    Gasmet CEMS is a modular construction that typically comprises of Gasmet CX4000 FTIR gas analyzer, heated sampling unit, industrial PC and a Zirconia oxygen analyzer which are installed in an air-conditioned cabin. All modules are 19' rack mounted in pull-out shelves for easy accessibility & service. Gasmet CX4000 FTIR gas analyzer allows the ...

    By Gasmet Technologies Oy based in Helsinki, FINLAND. from Stationary Analyzer Systems Product line

  • Procal - Model 2000 - Continuous Emission Monitoring (CEMS/AMS) Process Analyser System

    Procal 2000 uses the reflective beam principal to directly measure process gas as it enters the sample cell. Unlike higher maintenance extractive systems, Procal’s patented, sintered metal technology removes the need for gas filtering or sample conditioning. The analyzer requires very little maintenance and achieves a class-beating up-time ...

    By Delta Instrument based in Northvale, NEW JERSEY (USA). from Emissions Product line

  • Premium

    INNOVA - Model 3433 - Automotive Emissions Monitor System

    LumaSense offers the market quality photoacoustic-based gas monitoring solutions. The Automotive Emissions Monitor - 3433 is a highly accurate and reliable Multi Gas Monitor (PAS) with Specific Configuration for Exhaust Gas or SHED Evaporative Testing. Its measurement principle is based on the photoacoustic detection method. Extremely versatile by ...

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Photoacoustic Multi-Gas Monitor Product line

  • Premium

    Gasmet - Engine Emissions Monitoring System (EEMS)

    The Gasmet engine emissions monitoring system EEMS has been designed engine emissions monitoring which require for fast response time. A typical application for Gasmet EEMS consists of H2O, CO2, CO, N2O, NO, NO2, SO2, HCl, HF, NH3, CH4, C2H6, C3H8, and C2H4, but it can be e

    By Gasmet Technologies Oy based in Helsinki, FINLAND. from Stationary Analyzer Systems Product line

  • Simple Mini-Stack-Probe

    Probe for the use in small scale furnace stacks. System consist of one bent with bent radius 25 mm. Length of the bent as agreed. Entry thread M 12 x 1 mm for mini nozzles (Material: Stainless Steel). Complete with self regulating electrical heater for filter devices, high performance heater cartridge ca. 220 W, 230V, (default settings: 70°C, ...

    By Paul Gothe GmbH based in Bochum, GERMANY. from Emission Sampling Technique Product line

  • Model GO-100, GO-200 - Covered Sample Gas Conditioning Systems

    The IP covered sample gas conditioning systems of the series GO-T100 and GO-T200 (Patent-No. DBP 37 16 350) are a complete solution and offer the effective combination of peltier cooler and cyclone heat exchanger (Patent-Nr. DPB 38 33 192), filters and permeation dryer, which remove dust and dry the sample gas reliably.  In addition, aerosols ...

    By Gröger & Obst Vertriebs- und Service GmbH based in Wolfratshausen, GERMANY. from Emission Analysis Product line

  • Neptech - Air Intake and Back Pressure Control Valves

    Neptech Inc. is a manufacturer and custom engineering firm of electrically heated products used in emissions sampling today. Increased demand has paved the way for Neptech to become a major player in modulating control packages for Air Intake and Exhaust Back Pressure applications. Neptech can handle all applications ranging in sizes of ...

    By Neptech Inc. based in Highland, MICHIGAN (USA). from Emission Sampling Products Product line

  • Neptech Flexotherm - Heated Multiplexers

    Flexotherm manufactures heated multiplexers for use in emissions testing and sampling. Heated multiplexers from Flexotherm allow the user to have total control of gas flow and direction. Our multiplexers help improve testing effciency and accuracy while keeping your operators in control at a safe distance. Each model includes a custom-made heated ...

    By Neptech Inc. based in Highland, MICHIGAN (USA). from Emission Sampling Products Product line

  • Premium

    J.U.M. - Model TJ 100 - Heated Sample Line

    The model TJ 100 is a Heated Sample Line especially designed for Emissions Applications where hydrocarbons are to be measured. To prevent the forming of hydrocarbon memory effects, (hang up), the end caps are heat resistant to up to 200°C. This allows the sample line to be coupled inside an oven of a heated sample filter and heated FID ...

    By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY. from Heated FID Analyzers - Sampling Accessories Product line

  • Premium

    Sample Conditioning Unit

    The accurate emissions monitoring of soluble gases, present in flue gas from industrial and commercial processes, requires a sampling system designed to prevent significant loses of the SO2 and/or NO2 gases in the sampling lines prior to entering the analyzer or measuring device.

    By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA).

  • Cosine Correctors For Emission Collection

    Our Cosine Correctors couple to optical fibers and spectrometers for relative and absolute spectral intensity measurements, for emissive color applications, and for evaluation of light sources such as LEDs and lasers.

    By Ocean Optics - a Halma Company based in Dunedin, FLORIDA (USA). from Sampling Accessories Product line

  • Zambelli - Model isodust - High Performance Emissions Sampler

    The isodust is a high performance emissions sampler utilising a rotary pump to give an operating range of 0.4 to 40 l/min.  The instrument incorporates a volumetric dry gas meter, barometric pressure sensor (0-15 psi) and temperature indicator (-55°C to 125°C).  It will automatically compensate for loading losses in the flow rate ...

    By Zambelli S.r.l. based in di Milano, ITALY. from Wireless Sampling Product line

  • Aquaria - Model HV CF20 - Basic - High Volume Dust Sampler

    CF 20alfa Basic HV is an ideal instrument for all the operators who request to a sampler to be extremely reliable, careful in measurement as well as handy and versatile in use. This instrument, connected to the most various accessories designed in compliance with the law in force regulations, can operate sampling of dust in the workplace, ...

    By Aquaria based in Lacchirarella, ITALY. from ACTIVE - Emissions Product line

  • Irradiance/Emission Integrating Spheres: ISP-I

    ISP-I Integrating Spheres are convenient sampling optics that couple to our spectrometers and optical fibers to measure the spectral output of LEDs, lasers and other light sources from 200-1100 nm.

    By Ocean Optics - a Halma Company based in Dunedin, FLORIDA (USA). from Sampling Accessories Product line

  • Model CEMS - Emission Monitoring Systems

    Often, emission monitoring systems can be prone to faults, with unstable systems being built which allow particulates to be incorrectly filtered and high water vapour levels/corrosive components being left in the gas stream. This can not only damage the system, causing long term problems, but also create an unreliable sample. At Orbital, we use ...

    By Orbital based in Staffordshire, UNITED KINGDOM. from Emissions & Environmental Product line

  • Model GO-PK / GO-EPK - Gas Cooler

    To analyse the gas, it is also generally necessary to let the gas sample cool down among other things in order to condense the water vapour contained in the sample. To obtain precise measurements, it is absolutely necessary to prevent the substances to be analysed from being washed out during the cooling process. The gas coolers GO-PK and GO-EPK ...

    By Gröger & Obst Vertriebs- und Service GmbH based in Wolfratshausen, GERMANY. from Emission Analysis Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you