Process Gas Monitoring (Air Monitoring) Equipment Available In Eritrea
-
PremiumManufactured by ENVEAbased in FRANCE
The MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in ...
-
Manufactured by BHB – Sistemas de Controlo e Medidabased in PORTUGAL
BHB provides a wide range of probe tubes according to the characteristics of the process gases intended to be analyzed (temperature, dust content, pressure, dew point temperature, water vapor temperature, presence and temperature of acids). The probe tubes begin the sampling system and are provided in a Continuous Emission Monitoring ...
-
Manufactured by BHB – Sistemas de Controlo e Medidabased in PORTUGAL
so that the converter can be installed upstream the gas cooler/dryer without NO2 loss. The catalytic converter usually integrate the sample conditioning system and is usually provided in a Continuous Emissions Monitoring System (CEMS) but also in a process analysis integrated solution. ...
-
Manufactured by BHB – Sistemas de Controlo e Medidabased in PORTUGAL
the weather conditions (specially in harsh environments), the use of a stainless steel protection case. is mandatory. The filtration units are normally provided in a Continuous Emissions Monitoring System (CEMS) or in a Process Analysis integrated ...
-
Manufactured by BHB – Sistemas de Controlo e Medidabased in PORTUGAL
The sample gas conditioning system is intended to condition and treat the gas sample until it reaches the gas analyzer. As the NDIR gas analyzers need a completely dry gas sample for the measurement procedure, it is recommended to have a Gas Conditioning System eqquiped with a ...
-
Manufactured by BHB – Sistemas de Controlo e Medidabased in PORTUGAL
in a Sample Gas Conditioning System of a Continuous Emissions Monitoring System (CEMS) or in a Process Analysis integrated solution. ...
-
Manufactured by EffecTech Limitedbased in UNITED KINGDOM
Measurement errors can occur at any stage in the gas quality measurement system. EffecTech’s ISO 17020 accredited inspection provides an objective assessment of the sampling system, pressure reduction system, carrier and calibration gas systems against industry best practice. This gives confidence that the sampled gas is being ...
-
Manufactured by ExTox Gasmess-Systeme GmbHbased in GERMANY
It is often necessary to monitor gas concentrations even in sealed off processes or not accessible areas. Typical applications are for example silo and tank monitoring, land fill gas measurement or bio gas facilities. Direct measurement within these processes is often impossible ...
-
Manufactured by Heinrichs Messtechnik GmbHbased in GERMANY
The KDS and BGK flowmeters are used for measuring the flow of liquid and gaseous products in pipes as well as dosing, monitoring, adjusting and controlling them. They show the current flow quantity in volume or mass per unit in ...
-
Manufactured by AMETEK MOCONbased in USA
The Baseline® 9000 H Heated Hydrocarbon Analyzer is a microprocessor based instrument designed for continuous ambient or process hydrocarbon gas measurement in environmental or industrial settings. The heated total hydrocarbon analyzer is configured for single point analysis (with or without a sample pump) of samples heated up to 376 °F (191 ...
-
Manufactured by Xi`an Dingyan Technology Co., Ltd.based in CHINA
The zirconia oxygen analyzer is mainly used to detect oxygen content in the mixed gas to achieve safety, environmental protection, energy saving and process quality in the production process. Measuring gas components: O2. Measuring ...
-
Manufactured by ABB Measurement Productsbased in SWITZERLAND
ABB is the world"s leading manufacturer in the field of continuous gas analysis and system solutions - formerly known as Hartmann & Braun. Our gas analyzers and system solutions are designed and manufactured exclusively in Frankfurt, Germany. More than 75 years of experience in continuous gas analysis are the basis for our innovative ...
-
Manufactured by Shanghai Chunye Instrument Technology Co., Ltd.based in CHINA
The ag-cems07 flue gas emission continuous monitoring system (CEMS) can monitor the parameters such as SO2, NOx, O2, particulate matter, humidity, pressure, velocity and temperature in the gas.In addition, DAS software (data acquisition and processing system) is used to generate charts, hourly duty reports, daily mean monthly ...
-
Manufactured by Unisensor Sensorsysteme GmbHbased in GERMANY
CARBOSCAN 300 is a turnkey, factory-calibrated system for the online process monitoring of CO2 gas which ensures end-to-end quality assurance. The system uses the method of optical absorption spectroscopy to identify contaminants: it can identify even the tiniest traces of contaminants (down to sub PPB levels) using the light ...
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
Gasboard-2200 UV-DOAS NOx gas bench adopts high-precision ultraviolet differential absorption spectroscopy gas analysis technology to measure NO & NO2 simultaneously. It’s widely used by gas analyzers and PEMS manufacturers due to its flexible integration, high quality and easy ...
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
Gasboard-2300 NDUV NO2 gas bench adopts non-dispersive ultraviolet absorption (NDUV) technology and highly stable pulsed LED UV source to measure NO2 gas. It can measure the gas concentration of NO2 with high accuracy and strong anti-interference without NOx ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 9900 is a single or multi-component gas analyzer that measures process gas composition and can be used alone or as an integrated part of a continuous emissions monitoring (CEM) system. Configurable to measure most gas species that are absorbed in UV, it delivers excellent baseline stability and minimal span ...
-
Manufactured by Vacuum Instrument Corporation (VIC)based in USA
Introducing a solution to lower the cost associated with tracer gas consumption While industries strive to meet increasing demands to offer higher quality products at lower prices, the need to efficiently recycle process gas becomes apparent. Helium Recovery features a group of high efficiency gas recycling systems that ...
-
Manufactured by Industrial Physics Product Integrity Limitedbased in UNITED KINGDOM
Advanced technologies in process gas measurement for maintenance-free moisture analysis. The MM400 moisture / dew point hygrometers are designed to be customised to your application giving precise measurements while providing a simple, yet affordable ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
US EPA Designated Equivalent Method*. Ecotech presents the latest addition to the Serinus range: The Serinus 60 NO2 analyser with Cavity Attenuated Phase Shift (CAPS) spectroscopy technology. This technology allows direct measurement of nitrogen dioxide (NO2), rather than an indirect calculation from a chemiluminescence analyser. Using a modulated blue LED light source, the detector measures the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you