Air Monitoring Equipment For Monitoring And Testing In Australasia
-
ShowcaseManufactured by Ecomesurebased in FRANCE
We spend more than 80% of our time indoors. However, indoor air can be up to eight times more contaminated than outdoor ...
-
ShowcaseManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Measure Gases in Ambient and Humid Conditions. Gasmet CX4015 is designed for continuous monitoring applications in ambient conditions, such as workplace air monitoring and quality control applications. It can be used to measure up to 50 components simultaneously, and additional gases can be easily added without any hardware changes. The sample cell can be heated up to 50 °C, which allows ...
-
ShowcaseManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
SCI’s sensor division incorporates state of the art sensor technology that has been enhanced with a machine learning calibration system and convenient cloud-based data acquisition platform. SCI sensor products merge with the Internet of Things (IoT), digital electronics, machine learning, and data visualization technologies to deliver precise air quality and meteorological data in ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Highly sensitive TOC trace analysis by wet chemical UV digestion. Lowest operating costs - no catalyst or combustion tube, no additional reagents Extension of the TOC working range to up to 10,000 ppm by means of an oxidation reagent that can be easily produced by the ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multipoint multigas calibrator SONIMIX 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3. With the optional Ozone generator and GPT circuitry it is possible to verify the coherence of NO, NO2 and O3 analysers, and to determine the converter’s efficiency ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Sorbent trapsprovide total mercury measurement as well as speciated mercury measurement (oxidized and elemental mercury phases). The flue gas sample is collected using a heated sample probe and calibrated pumping system. Mercury is captured by adsorption in sorbent traps media. The material in these traps is later analyzed using Zeeman mercury analyzer RA-915M and PYRO-915+ attachment. Traps are ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
As part of a facility monitoring solution, the Airnet® II and IIs Particle Sensors from Particle Measuring Systems are an EU GMP Annex 1 solution that meets the specifications of ISO 21501-4 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. A simple and cost-effective way to monitor your cleanroom, the Airnet II Air Particle ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Wide aperture lens optics capture more light in low-light applications. Signals come faster and are stronger. Small footprint to maximize the use of laboratory bench space. Available as either a PC-operated unit or as a stand-alone instrument with an integrated color touchscreen. Overhead white, green, red and blue LEDs come as standard in the series. “Slide2Hide“ door or fold down ...
-
PremiumManufactured by Environics, Inc.based in USA
Purity of calibration gases is assured with the Series 4040 Ultra-High Purity (UHP) Gas Dilution System. Manufactured with metal seal MFC’s and orbitally welded joints, the system has minimal dead volume and maintains a low leak rate to prevent atmospheric contamination of gas calibration standards. An ideal system for providing those in the semiconductor, aerospace, research/biotech and ...
-
PremiumManufactured by Ecomesurebased in FRANCE
Ambient air quality varies over the course of a day and even from one street to another. Road traffic, street plans, weather conditions and construction works contribute to these fluctuations. EcomTrek is a mobile outdoor air quality monitor designed to improve understanding of air pollution by measuring air quality at finer and broader spatial and temporal ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Compressor package (double-stage) with direct drive in air- or water-cooled design. Customised solution for special applications, modification according to customer specifications. 11 sizes ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Compressor package (single or multi-stage) for compression of process gases (except O2 and Cl). Oil-free compression. Variable drive types: Direct, flange-mounted spur gear or separately arranged. Feasible according to international standards such as API's as well as customer specifications. ...
-
PremiumManufactured by Ecomesurebased in FRANCE
Ambient air quality is one of the major environmental and health challenges facing our communities. Regulatory limits for nitrogen dioxide (NO2) and particulate matter (PM2.5, PM10) are frequently exceeded in urban areas. Vehicle emissions are the biggest culprit, but there are plenty of other sources. Heating systems, production plants, incineration plants and agricultural activities also cause ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Alpha-Modular-System for large blowers for process air applications. 104 model variants with low pulsation, reduced piping noise, integrated sound reduction measures and fully integrated oil system in the stage. 2-/3-lobe blower stage with direct or belt drive in a modular ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Reliable measurement of air temperature and air humidity for experts. Temperature and humidity measurements are needed for diverse requests and are of the most important meteorological parameters. Often both of the parameters are recorded with one sensor. SOMMER is offering with the Hydroclip and the MP-408A two very robust and long-term stable sensors for fulfilling highest ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS CEM systems measure multiple emissions or process gases in real time in situ. Using the DOAS (Differential Optical Absorption Spectroscopy) technique, the system is non-contact, with fast ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 2505 Mercury Vapor Calibration Unit is an ultra-precise and accurate closed-vessel, saturated gaseous mercury source. The 2505 utilizes a thermoelectrically cooled mercury reservoir and dual temperature sensors calibrated against a US National Institute of Standards and Technology (NIST) traceable source producing exceptionally accurate Hg delivery. The mercury vapor is delivered ...
-
PremiumManufactured by ENVEAbased in FRANCE
Certified Multi-sensor dust monitor – category 1 under ATEX / IECEx – for indicative emissions trending and measurement in hazardous zone and in dry processess with elevated pressures. Advanced Probe Electrification featuring long term data logging for process trend analysis and ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Kit, Atmospheric Air PCO2 Kit includes 250 feet (85m) 3/8 inch (9.5mm) composite tubing, a rain guard and ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The PermaCal has been developed in collaboration with the METAS (Swiss Federal Institute of Metrology). The most complex configuration consists in a double stage dilution and permeation system. The device can be available in a portable or rackable casing. The portable version is equipped with a battery and an internal pump with dryer that will provide flow to the permeation oven during the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you