Air Monitoring Equipment For Monitoring And Testing In Vermont
-
PremiumManufactured by Senix Corporationbased in USA
Senix ultrasonic sensors have a temperature sensor inside the sensor technique to compensate for changes in ambient air temperature. As the ambient air warms or cools, the sensor body temperature follows slowly, and the embedded temperature sensor data is used to adjust the calculation for the speed of sound in a linear ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The flexibility of the IMR 5000 CEMS allows it to offer an endless set of possibilities to measure different parameters like CO. C02, NO. X02, CH4, HC, NH3, C12, HC1, H2, 03, S02, H2S, 02, Velocity, Draft, Dust, Temperature and other parameters on ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
General: 12 or 18 analog inputs. 12.1” TFT touch screen (1024 x 768). Backlight. Screen Saver. Automatic Email of events (Ethernet Only). Web Server (Ethernet Only). Ingress Protection: IP 65 front, IP20 rear. Operating Temperature: 0°C to 50°C. Safety Standards: CE cULus, RoHS. Security Key. ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 400 is a wall-mounted flue-gas dryer, and is designed to prepare flue-gases for a wide variety of gas monitoring applications. The IMR 400 is a 'stand-alone' system that works automatically. The ruseed wall mounted enclosure meets NEMAtype 4 (IP65) classification. The first step of the flue-gas conditioning process is filtering the gas sample. The filtered flue-gas enters the IMR 400 ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
The Ion Science MiniPID 2 HS is a simple plug and play sensor designed to detect a wide range of volatile organic compound gases (VOCs) at sub ppb concentrations. Designed for OEMs, the MiniPID 2 HS high sensitivity PID sensor is the latest in the range of PID sensors from Ion Science for sub-ppb level detection. The ground-breaking MiniPID 2 HS is 15 times more sensitive than the existing ...
-
Manufactured by Isotech North Americabased in USA
The Isotech Hydra range of calibration baths has proved very successful since their introduction in 2003. The Orion range has been introduced to fit alongside the Hydra models. The Orion calibration baths offer deeper calibration volumes than the Isotech Hydra series, with world class temperature stability. There is a high temperature model (30°C to 300°C), and two models with built-in ...
-
Manufactured by Isotech North Americabased in USA
The ISOCAL 6 is the only calibration system in the world (Patent application 9900158.8) to offer you six calibration baths in one product. It is a complete temperature calibration laboratory in one simple, easy-to-use package. It is designed to expand with you to fulfill all of your future calibration needs, while giving you the flexibility to meet your current budgetary ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
This gas leak detector provides rapid and sensitive detection of a wide range of gases including Helium, Refrigerants and ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
Monitor and sample benzene with world leading benzene detection technology. Titan 2 benzene gas monitor incorporates the NEW MiniPID T2 10.0 eV Sensor which offers improved sensitivity, reliability and overall performance. The unique sampling method eliminates interfering gases such as toluene, xylene and methane providing you with accurate benzene concentration readings you can rely ...
-
Manufactured by Geotech Environmental Equipment Inc.based in USA
The MiniRAE Lite is the most reliable handheld volatile organic compound (VOC) monitor on the market. Its photoionization detector’s (PID) range of 0 to 5,000 ppm makes it an ideal instrument for applications ranging from environmental to ...
-
Distributed by Instrumartbased in USA
The GE Panametrics PM880 hygrometer is a complete, intrinsically safe, portable moisture analyzer system with options and accessories to meet all industrial moisture measurement needs. This Panametrics hygrometer is small, lightweight, and easy to use. The large LCD displays moisture readings in dewpoint (°C or °F), ppmv, ppmw, lb/MMSCF (natural gas), and a variety of other unit options. ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
General: 6 analog inputs. 5.6” TFT touch screen (640 x 480). Backlight. Screen Saver. Automatic Email of events (Ethernet Only). Web Server (Ethernet Only). Ingress Protection: IP 65 front, IP20 rear. Operating Temperature: 0°C to 50°C. Safety Standards: CE cULus, RoHS. Security ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The ET 301 is a dust monitor using well-proven technology providing accurate and rapid results. Being adaptable it can be used on duct sizes from 250mm to 5m making the ET 301 a suitable sensor for a wide range of applications where a dust measurement is required. ET 301 continuous dust monitor uses the well-proven sensor technology to directly measure mass particulate concentration by sensing ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 5000 is state-of-the-art Continuous Emission Monitoring System, and is designed for a wide variety of stationary emission monitoring applications. The IMR 5000 is a stand-alone analysis system that works automatically. Available in a 19” rack mount or rugged wall mounted enclosure. The wall mount enclosure meets NEMA type 4X (IP65) standards. The modular approach of the IMR 5000 ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
Dimensions: 19” x 17” x 12”. Weight approx.: 25 lbs. Basic: O2 – CO. 2 Sensors – 4 sensor inputs max. Recommended: use with Peltier Gas Dryer IMR ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS 6-inches (152mm) Gas Vapor Implant Installation Kit are used for permanent soil gas monitoring, UST monitoring, groundwater sampling, air sparging, vapor extraction monitoring, and as a pressure measurement point in vacuum testing. This kit allows a user to obtain or collect a soil gas sample by positioning or placing a 6” implant in the subsurface, and subsequently withdrawal a sample ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The flexibility of the IMR 5000 CEMS allows it to offer an endless set of possibilities to measure different parameters like CO, CO2, NO, NO2, CH4, HC, NH3, Cl2, HCl, H2, O3, SO2, H2S, O2, Velocity, Draft, Dust, Temperature and other parameters on ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The use of the measuring principle of dynamic pressure and PT100 assures a device which is easy in design and operating as well as the real-time monitoring of the measuring parameters. The operating and display unit is integrated in the probe head. On the high-quality display all measuring values, status information and parameters are displayed. Furthermore, a real-time display as line diagram is ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 8000 uses advanced TDLAS technology to detect gas concentrations in an open space by the absorption of specific light wavelengths by gas. The system is designed to keep your personnel safe in high risk environments. It can detect CH4 over distances of 120 meters. ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
IMR 6400 High Temp intelligent oxygen analyzer uses an advanced anti-interference circuit and an anti-volatile data protection function. The display will automatically switch to any range for the set limit concentration on the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you