Air Pollution Monitoring Applications

17 Results found
Only show results available in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Air Pollution Monitoring ×

Noise monitoring for airport noise

by ACOEM     based in Limonest, FRANCE

Air traffic is the source of several forms of disturbance to the surrounding area, including, in particular, noise pollution. Local residents in the vicinity of an airport are the most severely affected and are very conscious of the aircrafts` flight paths and the impact on their day-to-day living conditions.

Tunnel monitoring

by Opsis AB     based in Furulund, SWEDEN

Car tunnels need ventilation in order to keep air pollution below the limits. When the pollution levels reaches a setpoint, the fans must be started and kept running until the pollution levels decreases.

O2 Monitoring in Air

by Unisearch Associates Inc.     based in Concord, ONTARIO (CANADA)

Oxygen (O2) is a colorless odorless gas, essential to all life on Earth but damaging in high concentrations. An O2 analyzer should thus be employed for safety management and air pollution prevention purposes. LasIR MP110 is perfect for continuous emission monitoring of O2. It is based on TDLAS technology and can be calibrated as an O2 analyzer, providing accurate and reliable measurements. It quickly responds to changes in compound concentration, thus providing continuous emission monitoring for the specified gas.

Low level measurement of aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring.

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

NO2 analyzer - For Medical Application

by Environnement S.A     based in Poissy, FRANCE

The new and unique AS32M NO2 analyzer using CAPS (Cavity Attenuated Phase Shift) technology is an ideal solution for medical device applications such as INO (Inhaled Nitric Oxide). Originally designed for NO2 monitoring in roadside pollution surveillance and air quality applications, the AS32M is suitable for numerous other NO2 monitoring applications. For more information on how this unique analyzer, contact Environnement S.A.

Air monitoring for environmental control agencies

by Ahlstrom Filtration     based in Tampere, FINLAND

Urban air pollution is a major environmental problem in the developing countries of the world. That`s why to monitor the air quality becomes fundamental to define the air pollution level and take important measures to improve the air quality.

Ahlstrom offers a high performance filter media for Air Quality Monitoring. A filter media made of extremely pure micro-quartz fibers, appropriate for emission control at high temperatures and wherever absolute purity of the filter medium is required.

Pollutant monitoring for the manufacturing industries

by Ormantine USA Ltd., Inc.     based in Palm Bay, FLORIDA (USA)

Ormantine`s air monitoring equipment is widely used to monitor both indoor and outdoor air quality. Continuous development allows us to provide equipment for a broad range of applications, covering short-term and long-term monitoring. Pollutants can be detected even at very low levels – limits of detection are typically in the low parts per billion (ppb) range. Ormantine USA`s many solutions have applications from personal exposure monitoring to long term fence line monitoring studies.

Mass Spectrometer for air consultancy

by Custom Stack Analysis, LLC.     based in Alliance, OHIO (USA)

Everyone has a responsibility to care for the environment to reduce the levels of pollution, including businesses that daily release emissions into the air and the ground. This is why we provide a full-service environmental testing service to help businesses identify problems and resolve them so they operate in the most environmentally-friendly method possible. We offer air emission testing, emissions monitoring services and stack emissions testing to businesses of all sizes.

Roadside monitoring

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

Traffic, especially in urban locations, is one of the greatest contributors to air pollution. Traffic produces a variety of different pollutants that include particulates, NO2, NO, CO, hydrocarbons and in some cases SO2. The monitoring of roadside pollution can be challenging as often it is difficult to find suitable locations for large air quality monitoring systems and many sites that are available can be too far away to be representative of roadside air pollution.

Air pollution control for the coating industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Whether you are flow coating miniblinds, magnetic tape, aluminum cans, coils, wire or paper, Anguil`s 35 years of pollution control experience has provided unique insight into the wide variety of applications in the coating industry. Anguil`s experience leads directly to savings for our customers. Determining your solution begins by quantifying the problem with a thorough assessment of your emissions. Utilizing proven principles of design engineering, your system will evolve to incorporate air volume reduction strategies to reduce system size, meaning a reduction in both capital and operating costs. This can be achieved by recirculating the air in drying ovens or by cascading areas of lower VOC concentration to areas of higher VOC concentration.

Very large waste gas volumes with low contaminant concentration

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

The CTP desorption allows for an especially high concentration factor which, in turn, reduces the cost of ownership and permits an auto-thermal operation (additional burner switched off) even when the contaminant concentration is low.

SO2 Monitoring in Air

by Unisearch Associates Inc.     based in Concord, ONTARIO (CANADA)

SO2 (sulfur dioxide) is measured in a number of applications. SO2 is used as a food grade preservative and must be regulated in accordance with government-set criteria to be safe for consumers. It is also measured in fuel exhaust to control for environmental pollution and in cement plants for process control.

Ambient air and emissions monitoring of Polycyclic Aromatic Hydrocarbons – airmoC10-C20+

by Chromatotec Group     based in Val de Virvée, FRANCE

Polycyclic Aromatic Hydrocarbons (PAHs) are a group of over 100 different chemicals that are known to be formed typically during incomplete combustion of organic matter at high temperature. Their major sources in the atmosphere include industrial processes, vehicle exhausts, waste incinerations, and domestic heating emissions. Due to their carcinogenic/mutagenic effects, 16 PAHs are currently listed as priority air pollutants.

Continuous emissions monitoring for CO2 capture

by Opsis AB     based in Furulund, SWEDEN

The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3 and CO2. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few mg/m3.

Ambient Stations for Ambient Air Quality Monitoring

by Opsis AB     based in Furulund, SWEDEN

Ambient air monitoring involves the measurement of `representative` air in urban, industrial and rural areas. These measurements are used to determine the human exposure to pollutants and can be combined with trace/background monitoring.

Ambient air quality monitoring for governments

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

SO2 monitoring for the US NCore network, a multi pollutant network to measure  particles, pollutant gases and meteorology.

Air quality monitoring for health protection

by AQMesh     based in Stratford-upon-Avon, UNITED KINGDOM

Vertical pollution monitoring at different levels of a high rise building can reveal exposure of inhabitants to pollution and inform guidance about ventilation.

Need help finding the right suppliers?

Let the XPRTs do the work for you