Air Pollution Monitoring Equipment For Monitoring And Testing Available In Papua New Guinea
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The PermaCal has been developed in collaboration with the METAS (Swiss Federal Institute of Metrology). The most complex configuration consists in a double stage dilution and permeation system. The device can be available in a portable or rackable casing. The portable version is equipped with a battery and an internal pump with dryer that will provide flow to the permeation oven during the ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
Ozone analyzer adopts ultraviolet spectrometry principle and combines with advanced microprocessor technology. It provides accurate and reliable detection of O3 at ppb~ppm level to meet the requirement of ambient gas monitoring. UV adsorption Ozone analyzer is developed based on Beer-Lambert technology. It is applied to monitor low concentration O3 in ambient air. ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas Sonimix 6000 C2 calibrator is designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, for parameters such as SO2, HC, BTX, CO, NOx and O3. The Sonimix 6000 C2 includes Mass Flow Controllers, GPT, ozone and self re-generable zero air generator and is equipped with – an inlet for high concentration mixtures of diluted ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
NOx analyzer adopts chemiluminescence method and combines with advanced microprocessor technology. It provides accurate and reliable detection of NOx at ppb~ppm level which meets the requirements of ambient gas monitoring and online monitoring of pollution source with dilution method. The operation principle is based on chemiluminescence method. After absorbing the chemical energy and the ...
-
PremiumManufactured by ENVEAbased in FRANCE
PM10, PM2.5 and PM1 fine dust concentration measurement in the range 0-10,000 μg/m3 using the Standard Reference Method. The MP101M particulate analyzer uses the standard ISO 10473 beta gauge measurement method for the continuous measurement of the concentration of fine dust in ambient air. The instrument is certified equivalent to the reference method in accordance with the EN12341 European ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/PID for automatic monitoring of BTEX in air, water and soils. This instrument uses a port valve with a single absorbent trap, and a 30 meter metallic 0.28 mm ID column. Minimum detection level as low as 10 ppt for application Benzene or 1,3-Butadiene in ambient air. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
Polludrone is a fully integrated outdoor air quality monitoring system that delivers reference equivalent performance. Polludrone is a sensor-based air quality monitoring system for all the critical ambient environmental parameters related to air quality, noise, odour, weather, radiation. In addition, meteorological parameters like wind speed, wind direction, rainfall, flood levels, and ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The Pure Air Generator PAG 003 is your source of efficient and reliable zero air. It eliminates the need for ultrahigh-purity zero air cylinders. The PAG 003 is specifically designed for CLD analyzers measuring sub ppb levels. Other trace gas analyzers benefit as ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
AM-5 air quality continuous online automatic monitoring system can real-time monitor concentration changes of SO2, NOx, O3, CO, particulate matter(PM2.5,PM10) and other conventional pollution factor. It can be integrated with serosols, VOCs, NH3, and halide(HF/HCL) according to customer's needs. Combined with the five-parameter analyzer(temperature, humidity,wind direction, wind speed and air ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Airnet II is ideal for remote continuous particle monitoring as a component of a Facility Monitoring System. It meets the specifications of ISO 21501-4 and EU GMP Annex 1 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. The Airnet II Particle Sensor provides unparalleled performance with data transmission capabilities for ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Glass fiber filters are: Dense, Highly resistant to chemical attach, biologically inert, Easily sterilized: Can be baked or autoclaved, Store indefinitely: Unaffected by ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Ashless Cellulose Filter Paper such as the Whatman 41 series is commonly used in quantitative analytical techniques such as gravimetric analysis. E.G.: To convert precipitate to a stable weighing form, a chemist may wish to ignite the filter paper containing collected precipitate in a pre-weighed crucible, thereby removing the filter paper with minimal and uniform residual “ash”. ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Applications / Characteristics: Increased chemical resistance used to monitor airborne particulates. Does not adsorb acid ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
As part of a facility monitoring solution, the Airnet® II and IIs Particle Sensors from Particle Measuring Systems are an EU GMP Annex 1 solution that meets the specifications of ISO 21501-4 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. A simple and cost-effective way to monitor your cleanroom, the Airnet II Air Particle ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
AM-6 is a small online environmental monitoring system based on high-precision (ppb) gas sensors. The system provides a flexible sensor portfolio and modular design, which can simultaneously monitor various factors such as PM10, PM2 5, S02, N02, 03, CO, VOCs, temperature and humidity in the atmospheric environment, according to the monitoring needs. The system can expand various monitoring ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Purpose-built nano condensation particle counter CPC designed for use in the most critical fab spaces. The NanoAir™ 10 Condensation Particle Counter (CPC) is a revolutionary new product from Particle Measuring Systems (PMS). It provides the sensitivity of a CPC with the ease of use and functionality of a traditional cleanroom particle counter. Designed to monitor ultra-clean environments, ...
-
PremiumManufactured by ENVEAbased in FRANCE
Hybrid monitor utilizing ISO 10473 SRM Method & optical technology for Automatic & Real-Time measurement of PM10, PM2.5 and PM1 fine dust. The standard Beta gauge measurement Method ISO 10473 of the MP101M analyzer allows, when used with the patented optical technology of the OPM module, the continuous and simultaneous measurement of fine dust. Combination of both technologies provide a ...
-
PremiumManufactured by Ecomesurebased in FRANCE
The pollutants present in indoor environments are produced by human activities, furniture, building materials and emissions from outdoor sources. Improving our knowledge of the indoor air we breathe is a major health and economic ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas calibrator with GPT, ozone and self re-generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3. ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HandiLaz®Mini II handheld particle counter from Particle Measuring Systems is ergonomically designed to fit in the palm of your hand. Rugged and dependable, this small-footprint, lightweight instrument provides tremendous value for cost-conscious users who want a reliable, easy-to-use, handheld particle counter. With a comprehensive set of features, the HandiLaz® Mini II handheld ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you