Air Pollution Monitoring Equipment For Monitoring And Testing In Chile
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The PermaCal has been developed in collaboration with the METAS (Swiss Federal Institute of Metrology). The most complex configuration consists in a double stage dilution and permeation system. The device can be available in a portable or rackable casing. The portable version is equipped with a battery and an internal pump with dryer that will provide flow to the permeation oven during the ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas calibrator with GPT, ozone and self re-generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3. ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 4001 is a stand alone ozone primary transfer standard able to generate ozone together with dry or wet air (optional) allowing to calibrate the ozone monitors in several points. It generates an outflow of 3 Nl/min air containing 10 to 1000 ppb O3, with stability and reproducibility of the concentration better than 1% relative. The extended range model generates 10 ppb to 10 ppm at 3 ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas Sonimix 6000 C2 calibrator is designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, for parameters such as SO2, HC, BTX, CO, NOx and O3. The Sonimix 6000 C2 includes Mass Flow Controllers, GPT, ozone and self re-generable zero air generator and is equipped with – an inlet for high concentration mixtures of diluted ...
-
PremiumManufactured by Innovation nilu ASbased in NORWAY
The microplastic filter holder system is designed for capturing microplastics and other compounds sensitive to commonly used polycarbonate air filter holder systems. It includes an open-face version, which can be used with several successive stages of filters. Filters with different pore size or impregnating agents can be used. The filter holders are specially made in aluminium to avoid any ...
-
PremiumManufactured by ENVEAbased in FRANCE
PM10, PM2.5 and PM1 fine dust concentration measurement in the range 0-10,000 μg/m3 using the Standard Reference Method. The MP101M particulate analyzer uses the standard ISO 10473 beta gauge measurement method for the continuous measurement of the concentration of fine dust in ambient air. The instrument is certified equivalent to the reference method in accordance with the EN12341 European ...
-
PremiumManufactured by Innovation nilu ASbased in NORWAY
The NILU air sampling filter holder system is designed for sampling of particles and gaseous compounds on impregnated filters in air pollution measurements. We have both in-line filter holder and open-face filter holder. For both in-line and open-face air filter holder system it is possible to build several successive stages of filters for air sampling for the purpose of air pollution ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multipoint multigas calibrator SONIMIX 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3. With the optional Ozone generator and GPT circuitry it is possible to verify the coherence of NO, NO2 and O3 analysers, and to determine the converter’s efficiency ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A highly flexible range of high-precision flue gas oxygen analysers developed specifically for combustion analysis and control applications. Using AMETEK’s industry-proven zirconium oxide sensor technology, the WDG-1200/1210 range provides the world’s first fully-integrated, standalone flue gas oxygen analysers. The user interface is mounted onto the probe, lowering installation ...
-
PremiumManufactured by ENVEAbased in FRANCE
Hybrid monitor utilizing ISO 10473 SRM Method & optical technology for Automatic & Real-Time measurement of PM10, PM2.5 and PM1 fine dust. The standard Beta gauge measurement Method ISO 10473 of the MP101M analyzer allows, when used with the patented optical technology of the OPM module, the continuous and simultaneous measurement of fine dust. Combination of both technologies provide a ...
-
Manufactured by 2B Technologiesbased in USA
2B Tech has taken the next step in miniaturization of UV-based mercury monitors by developing the HERMES Personal Mercury Monitor or "PMM." The HERMES has dimensions of 4 x 3 x 1.5 inches and weighs only 0.75 lb (340 g). It has a built in GPS so that mercury measurements may be logged continuously along with geographic location. By folding the optical path in the shape of a "U," it was possible ...
-
Manufactured by 2B Technologiesbased in USA
Over the past few years there has been an enormous surge in interest in the application of low-cost sensors to measurements of air pollutants by educators, citizen scientists and members of various groups interested in air pollution levels in their own communities. This interest has stemmed from a combination of factors that include: development and marketing of low-cost electrochemical sensors ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The WDG 1200/integral electronics Insitu and the WDG 1210/remote electronics Insitu are rugged, reliable flue gas analyzers that use trusted zirconium oxide sensor technology for net oxygen (O2) measurements. The unique sensor design allows the entire sensor assembly, including the heater, to be removed without disturbing the outer protection tube which remains in the process. This makes field ...
-
Manufactured by 2B Technologiesbased in USA
The Personal Air Monitor or PAM was originally developed for our AQTreks K-12 educational outreach program and is now used in a wide range of other applications such as monitoring of smoke by the National Forest Service during forest fires, vertical profiling of air pollutants using quadcopters and hyperlocal mapping of air pollutants along streets of cities. The PAM was designed to measure only ...
-
Manufactured by 2B Technologiesbased in USA
2B Tech has taken the next step in miniaturization of UV-based ozone monitors by developing the Personal Ozone Monitor or "POM". The basic POM unit has dimensions of 4 x 3 x 1.5 inches and weighs only 0.8 lb / 1.0 lb without/with battery (360 g / 450 g ). It has a built in GPS so that ozone measurements may be logged continuously along with geographic location. By folding the optical path in the ...
-
Manufactured by 2B Technologiesbased in USA
The Best of the Best in One Package: The AQSync Air Quality Monitoring Station. FEM-quality absorbance measurements for O3, NO2, and NO. NDIR absorbance for CO2. Optical particle counter with sheath flow and heated inlet for PM1, PM2.5, and PM10. Amperometry for CO. Sonic anemometry and weather data. Data access and instrument control via the Cloud. Power-stingy requirements enable options for ...
-
Manufactured by 2B Technologiesbased in USA
For those who need to integrate their ozone monitor into a separate system such as an air pollution monitoring package, we offer the Model OEM-106 series where the entire ozone monitor is mounted on a single printed circuit board. The liquid crystal display and power switch may be detached and mounted outside the customer's custom enclosure. With the exception of our Personal Ozone Monitor ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you