Air Quality Monitoring Articles

  • Smart cities risk reputation with poor air quality data

    The team at AQMesh continue to receive many enquiries from smart city initiatives and are concerned that integrators risk undermining entire projects by distributing meaningless or misleading air quality information. “Many of the people I speak to are used to dealing with sensors that are easy to ‘plug and play’ and expect to be able to do the same with air quality sensors. This ...


    By AQMesh

  • Selecting the Right Air Quality Monitor

    There are many types of air quality monitors available, but which one is the best choice for measuring gaseous air pollutant concentrations? There are two classes of such air quality monitors: sampling monitors and in-situ monitors (“in-situ” = “in the original position”). Sampling monitors utilises a manifold through which the air to be analysed is pumped. A small air ...


    By Opsis AB

  • AQMesh shown to achieve highest correlation coefficients in new ACS paper

    A new paper published by the American Chemical Society (ACS Sensors) reviews the use of amperometric electrochemical gas sensors for monitoring inorganic gases that affect urban air quality. Written by John Saffell and Ronan Baron of Alphasense, the paper gives a full explanation of how the sensors work, how they have developed and a review of ...


    By AQMesh

  • DOAS Explained

    DOAS stands for Differential Optical Absorption Spectroscopy. The DOAS technique was conceived almost a century ago, and it was applied on research level to air quality monitoring already in the 1970s. In the mid-1980s, the technology was then commercialised and turned into practical and wide-spread use. The acronym DOAS itself reveals quite a lot of what it is about. ...


    By Opsis AB

  • 5 Habits that are bad for your indoor air quality

    School is starting, but warm weather means we are still spending more time outside and keeping windows open as much as possible. However, it doesn’t mean we are safe from poor indoor air quality at home. In fact, indoor air may be more polluted in the summer months than in the wintertime. The reasons include high humidity, pollutant buildup, pesticides and VOCs. There are certain habits in ...


    By Allerair Industries

  • Old container, new station: WS600 part of air quality measurement system in Kutaisi - Case Study

    An AQM station including a Lufft WS600 all-in-one weather sensor was installed by our local system integrator ELKO LLC in Kutaisi, Georgia in May 2017. It was mounted on an existing measurement container provided by the customer LEPL National Environmental Agency. The system consists of a Fidas® 200 fine dust monitor and immission measurement system detecting PM2.5 and PM10 particles from ...

  • Volvo dealer in Sweden compares air quality indoor and outdoor - Case Study

    Two AQMesh pods were used to measure NO, NO2, O3 and CO during May and June 2017 at the largest combined Volvo, Ford and Renault car dealer in Stockholm, Sweden, located on the highway between Stockholm city centre and Arlanda airport. The objective was to measure the air quality outside and inside the combined showroom and workshop, demonstrating the importance of measuring common ...


    By AQMesh

  • New California Regulations Pose Challenges and Potential Economic Benefits for Industrial Facilities

    States like California are well on their way to implementing laws, rules, and regulations that call for more community ambient air quality monitoring and greater transparency from the chemical industry. For instance, California Assembly Bill 617, signed into law this July, establishes a statewide air ...


    By SAFER Systems LLC

  • Interviewing James Mash, Director Of New BION-USA Business Unit

    James Mash, past President /CEO of Purafil Inc., joins Bioconservacion, as our Director of our new business entity BION – USA based in Atlanta, Georgia. James has been in the air purification industry for more than 20 years, during which time he has held top management positions in manufacturing, sales and management. His background in this business gives him an overall understanding, ...


    By Bioconservacion SA

  • Air quality in europe 2017

    The Air quality in Europe report series from the EEA presents regular assessments of Europe's air pollutant emissions, concentrations and their associated impacts on health and the environment. Air pollution is a key environmental and social issue and, at the same time, it is a complex problem posing multiple challenges in terms of ...

  • How the Indianapolis Airport Authority is going green while saving money - Case Study

    The Indianapolis Airport Authority (IAA) is actively supporting environmental sustainability efforts as a member of the global aviation community.  The IAA is “committed to engaging in environmentally responsible, sustainable operations, and minimizing any adverse environmental impacts.” This progressive group has identified three main ...


    By Harmony Enterprises, Inc.

  • Process analytics in methanol plants – Case Study

    Methanol is a clear liquid usually made from natural gas. It is a clean burning fuel, containing almost no sulphur or nitrogenous materials. It is a petrochemical that is used to make countless industrial and consumer products. In the future, methanol could be used as a source of hydrogen for fuel cells. Different concepts are in use to produce methanol looking always for higher plant efficiency ...

  • AQMesh used to measure local air quality at Surrey school

    Cleves School in Weybridge, Surrey (UK) has used AQMesh to measure pollution at the primary school’s entrance. The project, led by Dr. Edward Salter over the school’s summer term, aimed to understand exposure of the children (aged 7-11) to dangerous pollutant gases, with particular interest in the levels of nitrogen dioxide (NO2) and ozone (O3). Initial findings showed that levels of ...


    By AQMesh

  • Old container, new station: WS600 part of air quality measurement system in Kutaisi

    An AQM station including a Lufft WS600 all-in-one weather sensor was installed by our local system integrator ELKO LLC in Kutaisi, Georgia in May 2017. It was mounted on an existing measurement container provided by the customer LEPL National Environmental Agency. The system consists of a Fidas® 200 fine dust monitor and immission measurement system detecting PM2.5 and PM10 particles ...

  • Modeling for NAAQS Part 1: How to select the appropriate output for NO2

    The U.S. National Ambient Air Quality Standards (NAAQS) for 1-hour SO2, 1-hour NO2, and 24-hour PM2.5 use a very particular format. It is very important for all modelers (both within and outside of the U.S.) to understand how AERMOD handles this. In particular, U.S. users need to be familiar with the ...

  • On PM 2.5 Filters, Let’s just clear the air between us; ok?

    In the area of a former military building complex in the Chaoyang District of Beijing is a unique and thriving artistic community.  In the middle of this art district, is a strange 7-meter tall tower shaped like an avant-garde metallic pineapple.  Designed by Dutch artist Daan Roosegaarde, it is both an artistic creation and a functional tool meant to test a possible solution for ...


    By Sterlitech Corporation

  • Critical Monitoring of Forklift Emissions and Warehouse Ambient Air Quality - Case Study

    Our team of experts has been hard at work and has just released an industry-leading report detailing Forklift Emissions in Warehouses: The main objectives of this study were to investigate the effects of different engine conditions on exhaust gas emissions and to observe the effect that forklift emissions have on the ambient air quality of the warehouse.             ...

  • The ‘ins and outs’ of air quality monitoring

    The National Institute for Health and Care Excellence (NICE) recently issued draft guidance on ‘Air pollution - outdoor air quality and health.’ In the following article Jim Mills, Managing Director of Air Monitors Ltd, explains why there will need to be more funding for monitoring if the mitigation measures mentioned in the guidance are to be implemented effectively. Jim also ...


    By Air Monitors Ltd.

  • Learn How to Better Balance Equipment Performance and Worker Safety with Our Latest Application Note

    Do you want to ensure the safety and health of the workers at your warehouse and maximize the performance of the equipment they use? Here at E Instruments, we know that having a successful, and fully-functioning warehouse is dependent on whether or not the equipment is being maximized, and if the workers are working in a healthy environment that encourages productivity. However, we also know all ...

  • Connections: Price Of Progress

    In early November, about three weeks or what feels like 150 years ago, I ran into David Batker, the director of Earth Economics at the airport. I was on my way to the Soil Science Society meetings and he was going to Louisiana, where he is helping to put a dollar value on efforts to recreate the islands in the Mississippi delta as a ...


    By BioCycle Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you