Air Sampling Pumps Equipment For Monitoring And Testing Available In Ontario
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
We propose multiplexers (selection of multichannel samples) adapted to your installation and controlled by our software VISTACHROM. VISTACHROM can : "Cycle" methods to analyze different ranges on each stream. Transfer data via MODBUS, specific for each ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The ECONOAIR Premium L-15PTR is a low-cost high-performance personal air sampling pump. It is a simple model designed for sampling of asbestos, lead and other airborne contaminates. The rugged compact design features a rechargeable NiMH battery with available one-hour recharger. The L-15PTR can be programmed for timing routine activated sampling and allows the operator to select a reference T and ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The 2825PD is a very compact compressor or sample pump. The two pumping modules are made of 316 Stainless Steel with aluminum heads as a compressor or made from 316S stainless steel. The dual head design provides a high medium flow of approx. 25 liter per minute when configured parallel. Both pump modules can also be used as used as individual dual or high flow sample pump. In the all stainless ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HFC-Series, HI-Volume Air Flow Calibrators, have eliminated the need for cumbersome orifice plates and water manometers. The HFC-XXC series units utilize a precision machined Venturi tube coupled with a pressure differential gauge giving a direct reading in the volumetric units of your choice (i.e. SCFM @ stp) . The unit is calibrated against an in-line N.I.S.T. traceable laminar flow ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Due to the variable speed flow rate control, brushless maintenance free blower and portability, the CF-1512-VBRL is considered to be “The Ideal External Battery Operated Air Sampler”. The brushless blower used in the CF-1512-VBRL draws a maximum of 3.0 Amps at 6.5 CFM, permit-ting longer sampling times on a single battery charge. For higher maximum flow rates, with minimal Amp draw, ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Many air sampling procedures call for remote site sampling where the vacuum source (air sampling pump) cannot be conveniently located in the same area where sampling is required. This may be due to a variety of reasons including explosive sampling environments, inaccessibility, and noise level restrictions. For this reason, HI-Q has developed two types of sample retrieval and exhaust ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The Oilless Rotary Vane, Air Sampling Pumps incorporated in HI-Q’s continuous duty air sampling systems have “Lubricated-for-Life” ball bearings which leaves the internal workings virtually maintenance free. The only servicing needed is the occasional replacement of vanes, “O” Rings, filters, and gaskets when they become worn. Many variables determine the life ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The ECONOAIR Premium L-12PTR is a low-cost high-performance personal air sampling pump. It is a simple model designed for sampling of asbestos, lead and other airborne contaminates. The rugged compact design features a rechargeable NiMH battery with available one-hour recharger. The L-12PTR can be programmed for timing routine activated sampling and allows the operator to select a reference T ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
This extremely popular, outdoor rated continuous duty air sampling system is intended for secure outdoor ambient particulate and/or gaseous air sampling. The pump, control valve, and control panel are all hard mounted in a heavy gauge TIG welded aluminum, fully lockable, fan cooled, weather proof enclosure. The control panel houses the power switch, fuse protection, resettable electronic timer ...
-
Manufactured by Sensotranbased in SPAIN
When measuring concentrations of specific compounds, nothing quite beats the colorimetric tube for simplicity, flexibility and specificity. The Uniphos air-sampling pump is a one-stroke pump with built-in tip breaker and shard reservoir. This ensures safe and clean working and guarantees a reliable analysis. Uniphos offers tubes for most compounds, often in multiple measurement ranges. Most tubes ...
-
Manufactured by Beijing Shi’An Technology Instrument Co., Ltdbased in CHINA
SA-M202 series single gas detector is used for detecting any single channel of combustible gas which adopts catalytic principle ...
-
Manufactured by Gastec Corporationbased in JAPAN
Flow volume of 50-1000mL/min can be ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Zefon high volume rotary vane pumps are an economical alternative to the Gast brand rotary vane pumps. The workhorses are heavy duty with a 1/10 hp motor that can be used for most all sampling applications. It can be used with PCM, TEM, Air-O-Cell and all viable impactors (e.g. Andersen style ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Zefon Z-Lite 120V IAQ Air Sampling Pump. Zefon Z-Lite IAQ pump is a linear type pump which is very small in size, but produces a high volume of vacuum ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
The Model 650 FID is a high-temperature flame ionization sensor that continuously measures total hydrocarbon concentrations. Industrial Design: Rugged industrial strength assembly suitable for continuous use in harsh environments. Direct Mount: Design eliminates heat-traced sample lines & allows the fastest response time. Fully Heated: To avoid condensation during sampling, the entire sensor ...
-
Manufactured by Uniphos Envirotronic Pvt. Ltd. (UEPL)based in INDIA
Chemical detector tubes from different manufacturers work on the same principle and they use similar or same sensing chemicals for detecting the target gas concentration. However the physical dimensions of the tubes and the pump design to draw the required 100 ml of sample air varies from manufacturer to manufacturer. With our newly introduced KwikDraw Tubes based on MSA Detector Tubes ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
The TSI 4146 and 4046 Primary Calibrators are portable, battery-operated units that are lightweight, easy to use and accurate within 2% of reading. Volumetric flow rate. is displayed continuously so adjustments to pump flow can be made in real-time. Personal sampling pumps must be calibrated before and after each use and routinely checked during use. Flow calibrators are used to adjust and ...
-
Manufactured by A. P. Buck Inc.based in USA
The Buck Libra™ is a low-cost high-performance personal air sampling pump. It is a “no frills” model designed for sampling of asbestos, lead, and other airborne contaminates. The rugged, compact design features a rechargeable nickel-cadmium battery with available one-hour ...
-
Manufactured by Airbox Sampling Productsbased in UNITED KINGDOM
The Variflow 8 provides a more cost effective solution for those customers who only need to run at 8litres/min. Fully waterproof casing (to IP65) for ease of cleaning. Made from hard wearing ABS structural foam for maximum strength. Easy to store hose and telescopic mast designed to be replaceable. Highly visual display, custom designed, easy to use LED control panel. Fully adjustable flow rate ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
Operating Temperature: 200deg;C - 392deg;F. The Model SNR674 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR674 to sample low oxygen and inert ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you