Air Sampling Pumps Equipment For Monitoring And Testing In Australasia
-
Manufactured by Gastec Corporationbased in JAPAN
Flow volume of 50-1000mL/min can be ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
The Model 650 FID is a high-temperature flame ionization sensor that continuously measures total hydrocarbon concentrations. Industrial Design: Rugged industrial strength assembly suitable for continuous use in harsh environments. Direct Mount: Design eliminates heat-traced sample lines & allows the fastest response time. Fully Heated: To avoid condensation during sampling, the entire sensor ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
Operating Temperature: 200deg;C - 392deg;F. The Model SNR674 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR674 to sample low oxygen and inert ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The APHA-370 continuously monitors atmospheric THC, NMHC, and CH4 concentrations using a cross-flow modulated selective combustion type method combined with a hydrogen ion detection method. The APHA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
Operating Temperature: 270°C - 518°F. The Model SNR675 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR675 to sample low oxygen and inert ...
-
Manufactured by Gastec Corporationbased in JAPAN
The Model GSP-300FT-2 has been designed small and compact air sampling pump available with an integrated flowmetre for Hand-held, Personal or site sampling. This small size air sampling pump can be possible to carry on constant flow rate for 10 hours continuous sampling. This air sampling pump employs an extremely low noise air pump and automatic shut-off air pump by preset timer or volume for ...
-
Manufactured by RKI Instruments, Inc.based in USA
The FP-31 is a highly sensitive portable gas detector specific for formaldehyde detection. It uses a photoelectric photometry method which utilizes colorimetric tablets for detection. A tablet in placed into the instrument, and then a room air sample is pumped onto the tablet for either a 15 minute or a 30 minute period. If formaldehyde is present, it will cause the chemically impregnated tablet ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
Operating Temperature: 60°C - 140°F. The Model SNR671 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR671 to sample low oxygen and inert ...
-
Manufactured by SKCbased in USA
With its high-powered Li-Ion battery, this pump is capable of running for up to 40 hours at 2 L/min. Suitable for particulates or vapours and offering a wide flow range of 5-5000 ml/min, choose the UL-approved XR5000 if you need a pump that just keeps ...
-
Manufactured by Casellabased in UNITED KINGDOM
Whatever media you’re using you can be assured that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling pump has outstanding back pressure capability. There are no more worries about battery life: The Apex2 personal sampling pump has ...
-
Manufactured by Castle Group Ltdbased in UNITED KINGDOM
This is the Microdust Pro Dust Monitor, boasting the highest measurement range of any dust monitor on the market. Providing real time detection of aerosols, dusts and fumes, this data-logging dust monitor is hugely popular ...
-
Manufactured by SKCbased in USA
Reliability and simplicity make the SKC Sidekick a good entry level pump, whilst high build quality means it won't let you down. Available in three models including two ATEX approved models. All models offer a wide flow range of 5-3000 ml/min, which means the Sidekick is suitable for dust and gas sampling projects. The lower flows are achieved with the constant pressure controller and low flow ...
-
Manufactured by Casellabased in UNITED KINGDOM
The VAPex range has been designed particularly for low flow sampling of vapours and gases in working environments. Its Intrinsically Safe design and remote operation via the Airwave App makes it ideal for modern day sampling requirements. With a wide flow range of 20mL - 500mL, the VAPex personal sampling pump has outstanding back pressure capability. This capability ensures uninterrupted smooth ...
-
Manufactured by Casellabased in UNITED KINGDOM
The Flow Detective is an easy to use all-in-one airflow calibrator that is suitable for all types of air sampling pumps and other applications for flows up to 5L/min. It is a rugged, compact lab or field portable calibrator which removes the need to purchase multiple flowmeters. This minimizes set up prior to undertaking calibrations, and saves on purchasing costs and valuable time to undertake ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
Operating Temperature: 120°C - 248°F. The Model SNR672 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR672 to sample low oxygen and inert ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you