air sampling system Equipment available in Senegal

Available in Senegal| Near Senegal
162 Results found

We couldn't find any air sampling system equipment in Senegal

Here is a list of results available in Senegal

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Air Sampling ×

  • Keyword: air sampling system ×

  • Available in: Africa ×

  • Available in: Senegal ×


HI-Q - Solar Power Air Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

Since 1973 HI-Q Environmental Products Company's engineering staff has designed and developed hundreds of 'Custom, Turn-Key' Air Sampling Systems. Among these custom units are Complete Solar Powered Air Sampling Systems, which require Low Amp Draw, DC driven vacuum pumps. Let HI-Q's experience work for you.

HI-Q - Model PM-10 Series - High Volume Air Sampling Systems

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 ...

HI-Q - Model VS23-Series - Continuous Duty, Constant Flow Air Sampling Systems

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The VS-Series Air Sampling Systems can be either incorporated as the primary vacuum source in air monitoring instrumentation or used in conjunction with filter holders and filter media for the collection of particulate and/or gaseous constituents. The systems are furnished complete with a shock mounted base motor/pump, carrying handle, heavy duty ...

HI-Q - Model LFRR-25 - Low Flow Oilless Rocking Piston Air Sampling System

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

This Low Flow Air Sampling System has a flow range of 2-25 LPM. It consists of a 13 pound, 1/8 hp, Oilless Rocking Piston Pump, TMV needle control valve (for flow rate adjustment/measurement), brass interconnect piping, and 1/4' hose barb (Quick Disconnect Optional).

HI-Q - 7-Day Electronic Timer - High Volume Air Sampling System Options

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

7-Day Electronic Timer; 24 hours x 7 days programming. 16 program steps and cycle operation. Two independent 15 A control circuits. Manual override switch for each output. Easy-to-read, large, 0.5 inch high LCD display. Wide operating voltage range. 10-year battery backup for memory protection. Panel and Surface mountable. Protective cover and ...

Crowcon - Air Aspirator Sampling Systems

by Crowcon Detection Instruments Ltd - a Halma company     based in Milton Park, UNITED KINGDOM

Designed for use in Zone 1 or Zone 2 hazardous areas, the air aspirated system uses a compressed air driven vacuum generator to draw a gas sample from a single point. Explosion- proof gas detectors are fitted to monitor for flammable gases, toxic gases or oxygen. Each detector provides a 4-20mA output. An intrinsically safe flow-fail device warns ...

HI-Q - Quick Disconnect & Hose Fittings

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The following Quick Disconnect Couplings and Hose Barbs are for 'RV' Series Holders and Sampling Systems. HI-Q stocks male & female Stainless Steel and Brass Quick Disconnect fittings for all 3/8' fitting combinations.

HI-Q - Custom Mobile Air Sampling & Equipment Carts

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's Custom Mobile Air Sampling & Equipment Carts have proven to be industry leaders. From the heavy-duty design of the MRV0523CV-ALPHA used primarily to support ALPHA CAM's, to the telescoping equipment platform of the MSC-PLSTC used primarily for the transport of complete battery operated air sampling ...

Casella - Model Dust Guardian - Dust Monitor

by Casella     based in Kempston, UNITED KINGDOM

DUST Guardian is a system for web-based remote monitoring of dust emissions to ensure compliance with regulatory limits.  Data is ‘pushed’ automatically to a dedicated website using a private login and is accessible in real-time, 24 hours a day, 7 days a week, 365 days a year.

HI-Q - Dry Gas Totaling Meters

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet ...

IONICON - Nosespace Air Sampling Extension (N.A.S.E.)

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

A heated device for efficient real-time collection of nosespace air samples and introduction into a PTR-MS inlet system. In food, flavor and fragrance science, panelists smell or taste products and a scientist would like to directly measure what the panelist tastes with an quantitative, real-time method such as PTR-MS. For the direct introduction ...

HI-Q - Model CF-1512/24-VBRL - Variable Speed, Brushless DC Air Sampler

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

Due to its low Amp draw, variable speed flow rate control, brushless maintenance free blower and portability, the CF-1512-VBRL is considered to be 'The Ideal External Battery Operated Air Sampler'. The brushless blower used in the CF-1512-VBRL draws a maximum of 3.0 Amps at 6.5 CFM, permitting longer sampling times on a single battery charge. For ...

Hi-Q - Model CF-993B - Fixed Speed, Internal Battery & Charger

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q's CF-993B & CF-993B-4 are ideal for remote location air sampling where line power is not available. An internally mounted sealed 12 Volt battery and battery charger eliminate the need for the transportation of cumbersome battery cables and the awkward handling of heavy batteries. The timer has 10 programmable timing functions with a wide ...

Microdust - Model Pro - Remote Noise Monitoring System / Remote Dust Emissions Monitoring System

by Casella     based in Kempston, UNITED KINGDOM

Microdust Pro is a rugged, hand-held, data logging instrument for the real-time detection of airborne dusts, fumes and aerosols. A quick, easy to use instrument, giving the user additional qualitative data which cannot be gained by gravimetric air sampling methods alone. This extremely versatile instrument can also be used with a range of ...

Gasmet - Multipoint Sampling System (MSS)

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The MSS is designed for continuous monitoring of multiple measuring points. It’s designed to work as an integral part of the FCX measuring system. The MSS is used for on-line measurements. It is an ideal tool to measure components of interest in ambient conditions from several measuring points. The sample pump, valves, filter and sample ...

HI-Q - Stack Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard ...

Tekran - Model 1110 - Synchronized - Two Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1110 Synchronized Two Port Sampling System gives the Model 2537 Mercury Vapor Analyzer the ability to sample two unique sources. Switching between the two sources is synchronized with the instrument sampling cycle and is fully programmable by the user. This is particularly useful for flux chamber studies to measure inlet and ...

Tekran - Model 1115 - Synchronized Multi-Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1115 Synchronized Multi-Port Sampling System works in a similar fashion to the Model 1110, but the Model 1115 allows sampling of up to eight separate input sources. Switching between the sources is synchronized with the instrument sampling cycle. The number of sampling cycles in each position is programmable by the user. The Model ...

Unattended, Representative Sampling of Chemical Reactions

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The unique, patented EasySampler probe enables the capture and immediate quenching of reaction samples.  Immediate sample quenching provides a sample representative of the reaction at the time of sampling.  In particular, this is advantageous for monitoring: Low Temperature Reactions. Air-Sensitive Reactions.

HI-Q - Model PUF-3000 & 2000 Series - Polyurethane Foam/Vapor Collection Systems

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's Polyurethane Foam (PUF) air sampling system is designed to simultaneously collect both airborne particulate and pesticide vapors. Both the PUF-2000 (Brushed) and PUF-3000BRL (Brushless) Organic Toxics Samplers house a combination 4' diameter paper & glass cartridge 'PUF' holder to collect samples at ...

Related Terms for air sampling system

Need help finding the right suppliers?

Let the XPRTs do the work for you