high volume air sampling Equipment available in Ghana

Available in Ghana| Near Ghana
69 Results found

We couldn't find any high volume air sampling equipment in Ghana

Here is a list of results available in Ghana

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Air Sampling ×

  • Keyword: high volume air sampling ×

  • Available in: Africa ×

  • Available in: Ghana ×

HI-Q - Model PM-10 Series - High Volume Air Sampling Systems

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 ...

HI-Q - 7-Day Electronic Timer - High Volume Air Sampling System Options

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

7-Day Electronic Timer; 24 hours x 7 days programming. 16 program steps and cycle operation. Two independent 15 A control circuits. Manual override switch for each output. Easy-to-read, large, 0.5 inch high LCD display. Wide operating voltage range. 10-year battery backup for memory protection. Panel and Surface mountable. Protective cover and ...

HI-Q - Model 2000-Series - Manual Flow Control High Volume TSP w/ Brushed Blower

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

This variable speed High Volume Air Sampling unit is built around a two stage centrifugal fan type brushed blower. The tangential discharge exhaust allows a higher maximum flow rate than other similar types of units. To reduce motor winding burn out, the HVP-2000 has a separate motor cooling fan. Brush-life will range between 600 to 1,000 hours ...

HI-Q - Model 3000-Series - Manual Flow Control High Volume TSP w/ Brushless Blower

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

These High Volume Air Samplers are housed in a clear-anodized aluminum outdoor shelter. The Brushless, two or three stage centrifugal fan blower can be used for particulate sampling with either a 4' diameter or 8' x 10' filter paper holder. The blower motor has a variable speed control feature which allows the operator to select a flow rate up to ...

HI-Q - Model HVP-4000AFC-Series - High Volume Air Samplers

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The HVP-4000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The units incorporate a maintenance-free, two or three stage centrifugal blower powered by a brushless, variable speed, maintenance free motor. Blower selection is dependent upon individual sampling environment. The speed of the motor is ...

HI-Q - Model CF-900 Series - Brushed Blower Portable Air Samplers

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

This Low-Cost/High-Performing Air Sampling System is ideal for radioiodine and particulate grab & continuous duty air sampling. The CF-900 Series air samplers are packaged in rugged aluminum enclosures weighing less than 10 pounds. Its' light weight yet durable frame allows a single operator to transport, set up, and take a sample quickly in ...

HI-Q - Model TFIA Series - Fixed Speed Portable Air Samplers

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

This low cost pump is ideal for indoor or outdoor sampling of Air Pollutants such as Radioactive Particulate. The standard TFIA unit comes complete with a rotometer scaled up to 70 CFM and a 4' diameter filter holder assembly which accepts the 'CF' series 8' x 10' paper only holders.

HI-Q - Model PUF-3000 & 2000 Series - Polyurethane Foam/Vapor Collection Systems

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's Polyurethane Foam (PUF) air sampling system is designed to simultaneously collect both airborne particulate and pesticide vapors. Both the PUF-2000 (Brushed) and PUF-3000BRL (Brushless) Organic Toxics Samplers house a combination 4' diameter paper & glass cartridge 'PUF' holder to collect samples at ...

HI-Q - Model CF-1000BRL Series - Brushless Blower Portable Air Samplers

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

This Portable, Maintenance-Free, Variable Speed, High Volume, Brushless Blower Air Sampling System is ideal for continuous or intermittent sampling. The 'CF-1000BRL' air sampler series have three flow ranges from which to choose. The standard CF-1001BRL unit includes a 1½' female straight-pipe fitting, which accepts all 'CF' Series holders ...

HI-Q - Model 4000-Series - Automatic Flow Control High Volume TSP w/ Communication Options

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The HVP-4000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The units incorporate a maintenance-free, two or three stage centrifugal blower powered by a brushless, variable speed, maintenance free motor. Blower selection is dependent upon individual sampling environment. The speed of the motor is ...

HI-Q - Model CF-970T Series - Timer Controlled Portable Air Samplers

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The CF970T-Series Air Samplers provide sampling time ranges from 0.01 seconds to 9999 Hours. Time ranges and operating modes are selected by front panel programming. There are eleven programmable time ranges and six programmable operating modes (i.e.: delay, interval, single shot,). The programmable versatility makes the CF-970T ideal for grab and ...

HI-Q - Model 3500-Series - Automatic Flow Control High Volume TSP w/ Brushless Blower

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

These high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The units incorporate a maintenance-free, two or three stage centrifugal blower powered by a brushless, variable speed, maintenance-free motor. The motor is controlled by an electronic mass flow sensor that detects changes in the operators pre-set flow rate ...

HI-Q - Model 4000-Series - Retro-Fit Kits w/ Automatic Flow Control & Communication Options

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q's 4000-Series 2 & 3 Stage Brushless Blower, Automatic Flow Control Retro-Fit Kits are intended to either upgrade existing mass flow control systems, or for the complete conversion of standard Brushed & Brushless Manual Speed Control High Volume Air Samplers.

HI-Q - Dry Gas Totaling Meters

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet ...

HI-Q - Model HFC-Series - Digital & Analog Style High Volume Air Flow Calibrators

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The HFC-Series, HI-Volume Air Flow Calibrators, have eliminated the need for cumbersome orifice plates and water manometers. The HFC-XXC series units utilize a precision machined Venturi tube coupled with a pressure differential gauge giving a direct reading in the volumetric units of your choice (i.e. SCFM @ stp) . The unit is calibrated against ...

HI-Q - Model TFIA-4BC :12/24 VDC - Fixed Speed Air Sampler

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The TFIA-4BC is identical in configuration to the TFIA accepting the same TFIA options (excluding speed controller) as the AC power version depicted in the

HI-Q - Model PM-10 - Sampling Inlet

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's High Volume PM-10 Size Selective Inlet samples suspended particulate in the air at a flow rate of 40 CFM through its omnidirectional head. The air is then accelerated through multiple internal nozzles toward a greased collection plate. Due to their larger momentum, particles greater than 10 microns cannot ...

Tekran - Model 1115 - Synchronized Multi-Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1115 Synchronized Multi-Port Sampling System works in a similar fashion to the Model 1110, but the Model 1115 allows sampling of up to eight separate input sources. Switching between the sources is synchronized with the instrument sampling cycle. The number of sampling cycles in each position is programmable by the user. The Model ...

Cerulean - Model AS600XR - High Volume Air Sampler

by Molins PLC t/a Cerulean     based in Milton Keynes, UNITED KINGDOM

The AS600XR is a rugged fixed position high volume air sampler developed in conjunction with world renowned organisations for measuring enzyme levels.  Enclosed in a stainless steel housing and featuring a brushless maintenance-free motor driving a side channel blower, the machine is powered via 110V, 240V and provides run times up to ...

HI-Q - Calibrator Adapter Fittings for In-Line Calibration

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

Air Flow Calibrators are generally used to verify the displayed air sample flow rate accuracy of complete air sampling systems. Along with the air flow measuring device to be calibrated, it is recommended that a 'Complete' system for calibration should also include the actual filter holder and filter media in order to duplicate realistic pressure ...

Related Terms for high volume air sampling

Need help finding the right suppliers?

Let the XPRTs do the work for you