PM10 Sampling (Air Sampling) Equipment In Europe
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The PM10 monitor version of OPSIS’ SM200 particulate monitor provides accurate and reliable automatic measurements of PM10 particulate fraction concentrations in ambient air, as well as sampling of the PM10 particulate fraction for subsequent manual ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
. The mass concentration of PM-10’s is determined by dividing the particulate mass by the volume of air sampled. The “PM10-INLET” is adaptable to all of HI-Q’s HVP-Series ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The High Volume PM 2.5 ambient air sampling inlet & retrofit kits are designed to provide existing owners of HI-Q Series High Volume PM-10 sampling systems with the option of retrofitting them into High Volume PM-2.5 Samplers, instead of needing to procure a new, complete, PM-2.5 high volume air sampler. An adapter is placed into the ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
This unit is built around a two stage centrifugal fan type brushed blower. The tangential discharge exhaust allows a higher maximum flow rate than other similar types of units. To reduce motor winding burn out, the HVP-2000 has a separate motor cooling fan. Brush-life will range between 600 to 1,000 hours depending on sampling mo- tor speed. ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HVP-5000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The unit incorporates a maintenance free, 2 or 3 stage centrifugal blower powered by a brushless, variable speed maintenance-free motor. Blower selection is dependent upon individual sampling environment. The speed of the motor is ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HVP-4000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The units incorporate a maintenance-free, two or three stage centrifugal blower powered by a brushless, variable speed, maintenance free motor. Blower selection is dependent upon individual sampling environment. The speed of the ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Glass fiber filter media is made from 100% micro-fine borosilicate glass fibers. Glass fiber filters are used where high flow rate and micron/sub-micron filtration is required. The filter media can be used for both liquid and air filtration. In the highest purity form, HI-Q offers a binderless “AE” grade glass filter media. With its’ excellent purity, using the FPAE-XX series ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 microns (mm). The standard has been deemed PM-10, ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
These High Volume Air Samplers are housed in a clear-anodized aluminum outdoor shelter. The Brushless, two or three stage centrifugal fan blower can be used for particulate sampling with either a 4” diameter or 8” x 10” filter paper holder. The blower motor has a variable speed control feature which allows the operator to ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and ...
-
Manufactured by AMS Analiticabased in ITALY
A). These PM10 and PM2,5 impactors obtained the certification of compliance with TUV Rheinland ...
-
Manufactured by AirMetricsbased in USA
The MiniVol TAS can be configured to sample for PM10 at a flow rate of 5L/min. The sampling procedures for PM10 are listed ...
-
Manufactured by AMS Analiticabased in ITALY
PM10-2,5 sampling adding the Wins impactor. The PM10 and PM2,5 US EPA sampling inlet is a part of a new field portable sampling system combined with a constant flow rate AirCube Sampler. The PM inlet are manufactured in fully compliance with US EPA requirements available in the reference method. Fully ...
-
Manufactured by TCR-Tecorabased in ITALY
, contaminated environments to allow PTS/PM10/PM2,5/PM1 sampling on a filter with a backup sorbent trap (PUF) for gaseous organic micropollutants (PCDD/F, PCBs and PAH’s) with the possibility to monitor PM 10 - PM 2.5 - PM1 real time trend concentrations and 24 sizes classes particle ...
-
Manufactured by FAI Instrumentsbased in ITALY
SILENT Sequential Air Sampler is a sequential instrument specifically developed for particulate matter collection in indoor environment. To assure extended unattended sampling periods, up to 4 inlets (each one carrying one membrane filter) can be installed in the sequential unit and programmed for cycles in the desired ...
-
Manufactured by AirMetricsbased in USA
Airmetrics manufactures the MiniVol TAS, which samples ambient air at 5 liters/minute for particulate matter (PM10, PM2.5, TSP). While not a reference method sampler, the MiniVol TAS gives results that closely approximate data from Federal Reference Method samplers. Lightweight and portable, the MiniVol TAS is ideal for remote areas or ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
The Partisol-FRM Model 2000 Air Sampler is USEPA reference method designated for both PM-2.5 and PM-10. It is the proven manual sampling platform for the USEPA PM-2.5 standard. It is based upon the original Partisol Air Sampler, which received the USEPA reference designation for PM-10 measurements in June ...
-
Manufactured by Mesa Laboratories, Inc.based in USA
The BGI PQ200 FRM Sampler uses BGI pioneering technology to meet and exceed the requirements for ambient particulate sampling dictated by the U.S Environmental Protection Agency. This includes the design of reliable PM10, PM2.5 and PM1 Inlets, volumetric sample flow rate control, data logging and software for report and data ...
-
Manufactured by Cytivabased in USA
Cytiva’s Whatman EPM 2000 air filters are used in high-volume PM-10 sampling equipment. Manufactured from 100% pure borosilicate glass, they enable detailed chemical analysis of trace pollutants with minimal ...
-
Manufactured by Cytivabased in USA
Cytiva’s Whatman EPM 2000 air filters are used in high-volume PM-10 sampling equipment. Manufactured from 100% pure borosilicate glass, they enable detailed chemical analysis of trace pollutants with minimal ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you