Sample Bag (Air Sampling) Equipment Available In Guinea-Bissau
-
Manufactured by CEL Scientific Corporationbased in USA
2-in-1 fittings available in polypropylene (left), stainless steel (middle), and PTFE (right). New design fully automatic vacuum air sampling box is available to order NOW!, CEL Scientific gas sampling bags are made of DuPont's 2mil Tedlar® PVF film. Tedlar® PVF film is tough, durable, and considered chemically inert to a wide ...
-
Manufactured by CEL Scientific Corporationbased in USA
2-in-1 fittings available in polypropylene New design fully automatic vacuum air sampling box is available to order NOW!, CEL Scientific foil gas sampling bags are made of metalized polyester & polyethylene bonded film, which are suitable for sampling low molecular weight compounds such as carbon monoxide (CO), carbon dioxide ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
Olfasense is reseller of Kynar and Tedlar sampling bags made from PVDF, offering sizes from 0.5 L to 1000 L. Tedlar and Kynar bags are commonly used for indoor air sampling, waste sites, storage tanks, stack sampling, soil gas sampling, gas blending, calibration test standards, and many other ...
-
Manufactured by Samplebags.eubased in NETHERLANDS
Our Teflon gas sampling bags are made of Fluropolymer (FEP) film and are highly inert for storage of gas samples. FEP film is the most chemically resistant film in the fluoropolymer family with low adsorption. The thickness of the FEP Teflon film is about 0,07 mm. These Teflon bags are very suitable for sampling ...
-
Manufactured by Quality Environmental Containers, Inc. (QEC)based in USA
Fitted with Locking Combo Valve. Other custom fittings available (additional cost). Grommet for hanging or tagging. Labels included. Low gas permeation levels. Less permeable than FEP, PFA and TFM. High tensile strength. Bags resist puncture in the field. Withstands temperatures up to 400°F. Unaffected by the chemical components of ...
-
Manufactured by Quality Environmental Containers, Inc. (QEC)based in USA
Fitted with Screw Cap Combo Valve. Other custom fittings available (additional cost). Multiple layers provide low permeability and a moisture barrier. Opaqueness protects samples from ultraviolet light. Only bag material that adequately holds H2S for extended periods (>5 to 7 days). Ideal for collecting low molecular weight compounds. ...
-
based in UNITED KINGDOM
UNITY–CIA Advantage-xr™ is an inert, multi-channel system for the automated analysis of VOCs in canisters and bags. It has capacity for up to 27 channels, operates completely without cryogen, and is also compatible with on-line and tube-based sampling. It’s the ultimate system for high-throughput laboratories running the ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The Olfasense vacuum air sampling box allows for taking air samples into sampling bags without the sample coming into direct contact with the pump. The box can fill up to 10-liter sampling bags, with a flowmeter allowing to adapt the filling rate of the bag. ...
-
Manufactured by CEL Scientific Corporationbased in USA
Features: Three easy-to-operate buttons. Fills bag without sample passing through pump. Automatic-stop function to prevent overfill. Maximum Vacuum: 28" Hg (380" H2O). Collects over 100 samples with a full battery. Purge function to flush bag. Accommodates 0.5L – 2L sampling bags. ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The main benefit of the PureSniff system is that it allows the standardised presentation of undiluted odour samples. With a PureSniff device, you can measure an odour’s intensity, hedonic tone and pleasantness by the direct evaluation of an undiluted sample. As the operator triggers a volume flow, the odour sample streams out of the ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The CSD30 is a sampling device for collecting air (odour) samples in gas sampling bags, with a default odour sampling duration of 30 minutes. Using the lung principle, the sample flows into the gas sampling bag through the sampling tube only, ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
Our standard odour sampling device consists of a vacuum container that is evacuated by a vacuum pump. The sampling point and the standard sampler are connected by a probe. When the sampling device is evacuated, the gas sampling bag inside sucks in sample air via the probe. The ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
or synthetic air. This means that when it cools down to the transportation and laboratory temperature, no condensation forms on the probe, in the tube or in the sample bag. As a result, no additional heating is ...
-
Manufactured by Samplebags.eubased in NETHERLANDS
The Tedlar gas sampling bags are made of DuPont’s 2mil Tedlar® PVF film. Tedlar® PVF film is tough, durable, and considered chemically inert to a wide range of compounds. Bags of Tedlar film can be used for indoor air sampling, hazardous waste sites, leaking underground storage tanks, stack ...
-
Manufactured by IUL S.A.based in SPAIN
-contamination-free. The Masticator blenders disperse samples inside sterile bags with paddles that drive a masticating action while moving the sample from side to side. This key step in sample preparation ensures homogenous distribution of microorganisms throughout the diluent. Several models encompass a wide array of ...
-
Manufactured by Intersciencebased in FRANCE
The DiluFlow Pro automatically dilutes a solid sample in seconds, with the appropriate weight of diluent, up to a total weight of 5 kg. Its robotic arm enables easy work under a laminar flow cabinet. 225 mL in 10 s. Dilution factor: 1/2 to 1/99. Dilution accuracy: > 99%*. Max weight: 5000 ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
The Supelco ATIS is a sample preparation device for adsorbent tubes. The Adsorbent Tube Injector System employs the technique of flash vaporization to vaporize the sample into a continuous flow of an inert gas, which carries the sample to the adsorbent tube. The sample pathway of the Adsorbent Tube Injector System is constructed ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
The Supelco ATIS is a sample preparation device for adsorbent tubes. The Adsorbent Tube Injector System employs the technique of flash vaporization to vaporize the sample into a continuous flow of an inert gas, which carries the sample to the adsorbent tube. The sample pathway of the Adsorbent Tube Injector System is constructed ...
-
Manufactured by Sigma-Aldrichbased in USA
The Supelco ATIS is a sample preparation device for adsorbent tubes. The Adsorbent Tube Injector System employs the technique of flash vaporization to vaporize the sample into a continuous flow of an inert gas, which carries the sample to the adsorbent tube. The sample pathway of the Adsorbent Tube Injector System is constructed ...
-
Manufactured by Sigma-Aldrichbased in USA
The Supelco ATIS is a sample preparation device for adsorbent tubes. The Adsorbent Tube Injector System employs the technique of flash vaporization to vaporize the sample into a continuous flow of an inert gas, which carries the sample to the adsorbent tube. The sample pathway of the Adsorbent Tube Injector System is constructed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you