Sampling Equipment (Air Sampling) Equipment Available In Cayman Islands
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q’s TR-1, TR-1000B, & TR-2000A are Light, Medium, & Heavy Duty Air Sampling & Equipment Tripods capable of extended sampling heights over 58 inches. For lightweight instrumentation, 12 pounds or less, HI-Q recommends the TR-1. For tripod applications which must be capable of supporting up to a 15 pound workload capacity, ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q Environmental Products Company's Custom Mobile Air Monitoring & Equipment Carts have proven to be industry leaders. From the heavy-duty design of the MRV0523CV-ALPHA used primarily to support ALPHA CAM's, to the telescoping equipment platform of the MSC-PLSTC used primarily for the transport of complete battery operated air ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
These stainless steel gouge augers with different dimensions consist of a steel auger pipe, a collecting bucket and a stick with a steel handle. The auger pipe is filled by pressing the collecting bucket with your foot. Because of the conical shape of this pipe the sample is easily pushed toward the collecting trough when the next sample is ...
-
Manufactured by Geonor ASbased in NORWAY
Effective sample length for the K-100 model is 700 mm. The sampler can be used on drilling rigs without disassembling rods and sampler between each sampling. The K-100 model is equipped with replaceable cutting head. One thin-walled head intended for undisturbed samples of silt and clay and one coarse head for sandy soil. Sand ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
Precise air flow calibration from 1-30 LPM Wide temperature range of -30° to +55° C Displays both actual and standard flow rates Simple operation with no moving parts Truly portable, battery powered ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
The Gilibrator-2 System provides users with a convenient and highly automated way to check almost any commercially available air sampling pump for proper air flow function before deployment. The system consists of an electronic Gilibrator-2 Base which is used with any of three sizes of wet bubble cells. These patented interchangeable ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The GSP dilutes the sample directly at the sampling point. Sample pre-dilution can be performed with nitrogen or synthetic air, whereby the pre-dilution ratio is fixed by the manufacturer (standard 1:10 with individual calibration data). The pre-dilution ratio can, however, be set to different exhaust air conditions on request by ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
Our standard odour sampling device consists of a vacuum container that is evacuated by a vacuum pump. The sampling point and the standard sampler are connected by a probe. When the sampling device is evacuated, the gas sampling bag inside sucks in sample air via the probe. The sampling device ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
Olfasense is reseller of Kynar and Tedlar sampling bags made from PVDF, offering sizes from 0.5 L to 1000 L. Tedlar and Kynar bags are commonly used for indoor air sampling, waste sites, storage tanks, stack sampling, soil gas sampling, gas blending, calibration test standards, and many other gas sampling ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The Olfasense vacuum air sampling box allows for taking air samples into sampling bags without the sample coming into direct contact with the pump. The box can fill up to 10-liter sampling bags, with a flowmeter allowing to adapt the filling rate of the bag. Through a observation window the operator can ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The CSD30 is a sampling device for collecting air (odour) samples in gas sampling bags, with a default odour sampling duration of 30 minutes. Using the lung principle, the sample flows into the gas sampling bag through the sampling tube only, without passing through pumps or ...
-
Manufactured by American Ecotech LLCbased in USA
The MicroVol 1100 low volume air sampler provides a flexible sampling platform for PM10, PM25 or TSP particulates and basic meteorological parameters. The MicroVol 1100 is suitable for both indoor and outdoor applications. The unit is microprocessor controlled and uses a mass flow sensor in conjunction with ambient temperature and pressure ...
-
Manufactured by ELEX Biological Products (Shanghai) Co., Ltd.based in CHINA
The media dispenser pump has a small size and light design, making it easy to clean and move around as necessary. According to the operation needs, the nozzle can be installed freely left and right. The pneumatic-type liquid feeding method is adopyed, and the media dispenser pump has an increased dispensing speed of up to 20% compared to the original product. The dilution solution can use our ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Like never before, the unique Air-O-Cell® CSI (Collector for SEM Identification) brings the advantages and precision of SEM particle analysis to indoor air quality investigations. The Air-O-Cell® CSI lets you perform optical and scanning electron microscopy (SEM) and x-ray analysis on the exact same air sample and exact same ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Zefon Field Rotameters are a low cost way to measure airflow in air sampling applications. They feature a durable acrylic housing with direct reading scales printed on them. Available in three different flow ranges covering a range of 0.2 through 30 LPM. Operation and maintenance are very simple; only a few common sense precautions ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Zefon Field Rotameters are a low cost way to measure airflow in air sampling applications. They feature a durable acrylic housing with direct reading scales printed on them. Available in three different flow ranges covering a range of 0.2 through 30 LPM. Operation and maintenance are very simple; only a few common sense precautions ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Zefon Field Rotameters are a low cost way to measure airflow in air sampling applications. They feature a durable acrylic housing with direct reading scales printed on them. Available in three different flow ranges covering a range of 0.2 through 30 LPM. Operation and maintenance are very simple; only a few common sense precautions ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
The TSI 4146 and 4046 Primary Flow Calibrators are portable, battery-operated units that are lightweight, easy to use and accurate within 2% of reading. Volumetric flow rate. is displayed continuously so adjustments to pump flow can be made in ...
-
PremiumManufactured by General Oceanics Inc.based in USA
195 dB source level 12 KHZ Bottom Finding Pinger used in conjunction with a standard 12KHZ shipboard bathymetric recorder to monitor height off the bottom of instruments or sampling equipment being lowered through the water ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q Environmental Products Company’s adjustable height lab jack can be used in supporting & elevating air sampling equipment and calibration devices with an extension range between 3½” to 14”. The LABJACK’s sturdy frame can support equipment weighing up to 45 lbs. on its 6¼” x ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you