We couldn't find any sampling supply equipment suppliers or service providers located in Oman
Here is a list of equipment results with suppliers serving Oman
Sampling Supply (Air Sampling) Equipment Available In Oman
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Like never before, the unique Air-O-Cell® CSI (Collector for SEM Identification) brings the advantages and precision of SEM particle analysis to indoor air quality investigations. The Air-O-Cell® CSI lets you perform optical and scanning electron microscopy (SEM) and x-ray analysis on the exact same air sample and exact same ...
-
Manufactured by Environmental Monitoring Systems, Inc.(ems)based in USA
The ems 37mm .8um three-piece cassette is designed for the testing of lead and other metals. All three piece lead cassettes are manufactured in the USA by Environmental Monitoring Systems. Our lead cassettes are checked and double checked by our quality assurance team to ensure that you always get the most accurate results ...
-
Manufactured by Airbox Sampling Productsbased in UNITED KINGDOM
O-Ring for Airbox sampling head - 23mm diameter Supplied in packs of ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q’s Mobile Air Sampling Station can be supplied with controllable flow rates from as little as 2 SCCM up to, as high as 200 SLPM. The unit can be equipped as either a single or dual flow sampling system – you make the call. Have an existing Stack Flow Rate Monitor? HI-Q’s MASS Unit can easily be linked ...
-
Manufactured by Horizon Scientific, Inc.based in USA
The Basic Series Solid Door Laboratory Refrigerators are purpose built for scientific and medical applications. These units feature a digital microprocessor temperature controller allowing for the precise temperature management necessary for critical samples and supplies. A forced air directional refrigeration system provides ...
-
Manufactured by TCR-Tecorabased in ITALY
50 for PM10 and PM2.5 at 1m3/h. Developed and realized to allow the maximum utilizing flexibility, the ECHO PM satisfies the hardware and software requests that permits up to 2 sequential sampling lines*. Supplied with respective sampling head ECHO PM can be utilized respecting the "ISO/CD 16362 for the determination of policycles ...
-
Manufactured by Kidde-Fenwal, Inc.based in USA
detector, the unit will alarm. The duct detector inlet supply sampling tube is selected according to the size of the HVAC duct. A separate exhaust tube is not required since an integral tube is molded into the housing to simplify ...
-
Manufactured by Sampling Systems Ltd.based in UNITED KINGDOM
Sampling Systems has a large range sampling equipment that has been specially designed for use in the pharmaceutical industry. Our GMP correct liquid samplers are all manufactured from FDA acceptable materials and are constructed to be crevice free to prevent cross contamination. Pharma grade samplers from Sampling Systems are used in ...
-
Manufactured by Aquamatic Limitedbased in UNITED KINGDOM
When super-compactness combined with uncompromised sampling performance is required, the Aquacell P2-COMPACT is the perfect solution. Ideal where using and transporting Samplers between sites or for temporary compliance purposes. The P2-COMPACT is conveniently supplied with an integrated easy clean 5 litre low profile composite Sample ...
-
Manufactured by Horizon Scientific, Inc.based in USA
The Plus Series Stainless Steel Laboratory Refrigerators feature a microprocessor temperature controller, allowing for precise temperature control, recovery and maintenance versus mechanical style ...
-
Manufactured by TCR-Tecorabased in ITALY
MSSI impactor is realized according to ISO23210 norm for the nozzle dimensioning. The impactor allows the simultaneous determination of total dust, PM10 and PM2.5 fractions (PM4 stage also available). The impactor can be supplied with two different inlet cones to allow the vertical and horizontal sampling, depending on the stream ...
-
Manufactured by AMS Analiticabased in ITALY
Easy, manual flow regulation and volumetric compensation, digital temperature revelation display. Maximum flux 25 liters per minute. Air Cube Basic: environmental sampler system for fixed positioned sampling. Suitable for total dust,breathable dusts, noxiousgases andtoxicvaporsdispersed in the air and chimney samples. ...
-
Manufactured by Maalab Scientific Equipment Pvt Ltd.based in INDIA
The model MA-2000 is intended for heat-vaporizing mercury present in a sample and then collecting it as a gold amalgam for measurement. This model does not require any wet pretreatment of samples, and hence can easily measure solid and liquid samples in as short a time as five minutes per sample. Both the control and data ...
-
by KYTOSbased in BELGIUM
Long-term preservation solution for water samples, Reduces bio-security risks during storage and transport, Enhances quality of flow cytometry analysis, Small footprint enables rapid and frequent sampling ...
-
Manufactured by Aquamatic Limitedbased in UNITED KINGDOM
Incorporated within the P2-COOLBOX is a high performance passive Sample Temperature Control facility. This ensures that the collected samples are preserved at an optimal temperature (0°C to 5°C up to 5 days) whilst awaiting collection / inspection. This is particularly useful when sampling biologically active ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Innovative, problem-solving tubing in the widest range of materials and sizes. Ground water sampling demands the highest standards in tubing quality, because the tubing presents so much contact area with the sample, and the contamination potential is significant. Tubing quality is even more important when used with dedicated sampling ...
-
Manufactured by N-Con Systems Company, Inc.based in USA
The Sentry was designed be flexible. It can be used as a portable or fixed location, wastewater sampler. Composite may be collected simple time or flow proportioned by connecting it to a suitable flow measurement system. or simple composite sample. The addition of an ice chest or refrigerator to preserve the composite sample, gives you a ...
-
Manufactured by Focus Laboratories Inc.based in USA
FOCUS Laboratories can help develop an environmental monitoring program that is useful form medical device manufacturers. Utilizing principles outlined in AAMI TIR52 Environmental Monitoring for Terminally Sterilized Healthcare Products, FOCUS Laboratories can help determine sample sites, sample frequency, methodology as well as interpret ...
-
based in GERMANY
For a simultaneous measuring of PM , PM and Pm (or TSP) in real-time plus - optionally - rel. humidity, temperature, wind speed, wind direction, precipitation and atm. pressure All data are online to the world wide ...
-
Manufactured by AMS Analiticabased in ITALY
The era of samplings with long interminable settings can be considered over with the new AirCube COM2 TH portable sampler. With just a few operations in the user-friendly preparation menu the sampler is immediately ready for a new sampling process. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you