Sequential Sampling (Air Sampling) Equipment Available In Syria
-
Manufactured by Labocontrolebased in FRANCE
The FlowControl sampler is well adapted to sample powders and granules out of a pressurized pipe transfer. It gives an easy and compact solution to collect a representative ...
-
Manufactured by Labocontrolebased in FRANCE
Based on the principle of the Archimedes’ screw, the PowControl in line sampler allows representative grab or composite sampling of free falling powders in a chute, or bulk powders in a filled vessel. The PowControl is particularly recommended to sample powders with a granulometry up to 1mm. Thanks to innovative design and the ...
-
Manufactured by GDS Technologies Ltd.based in UNITED KINGDOM
The GDS 306 system is designed to monitor gas levels from a number of sample-points, targeted at situations where the positioning of conventional gas sensors may not be practical. This may be due to equipment security, cable routing, access for detector head installation/maintenance, harsh environment or a cost effective means of ...
-
Manufactured by GDS Technologies Ltd.based in UNITED KINGDOM
Sequential Gas Sampling System 1-48 Way; 1-48 sample points.Monitor up to 8 gas types. No sample line purge delay. Wide range of sensor types. 4 line alpha/numeric display. Selectable sample line sequence. Display of each sample line location. Easily installed and maintained. Full indication of ...
-
Manufactured by TCR-Tecorabased in ITALY
The Sentinel PM module combined with the atmospherical sampler Charlie, allows the automated and sequential collections of the atmospherical particulate matters on 47 mm diameter filtering membranes, which are contained in appropriate filterholder cassette. The 16 filter capacity and the particular realization of a removable system, ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent inline sample preconcentration, sequential suppression, and conductivity detection enables fully automatic determination of anions or cations in solutions with low ion ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent inline sample preconcentration, sequential suppression and conductivity detection enables fully automatic determination of anions and cations in solutions with low ion ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Fully integrated solution for water content determination with volumetric Karl Fischer titration. OMNIS KF Titration is the high-end volumetric Karl Fischer titrator based on the modular OMNIS platform. With OMNIS KF Titration, determining water in samples has never been more convenient, safer, and ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Control system for the automated collection of gases and particles on adsorption tubes, wash-bottles, or filters. Application areas include emission/immission measurements, TLV value monitoring, landfill gas ...
-
Manufactured by Labocontrolebased in FRANCE
Based on the principle of a single acting cylinder, the pneumatic IsoControl MSA sampler allows the volumetric sampling of liquids flowing in transfer pipes. This sampler is adapted to sample low viscosity liquids such as raw or processed milk, serum, alcohol,…. The sequential sampling during the complete transfer of the ...
-
Manufactured by Dado Lab SRLbased in ITALY
The PMx sequential samplers Mod. Giano and Gemini were designed and realized by Dado lab to be more practical, easier to transport and with user friendly interface compared to other available solutions. The common heart to both models is the multi-purpose core unit (MPC) which manages the sequential sampling on a single or double ...
-
Manufactured by Aquaria Srlbased in ITALY
The sampler CF20 SQ offers the possibility to carry out a sequential sampling on 16 channels, each of which programmable indifferently in low or high flows. This possibility allows the operator to sample dust and gas in a single ...
-
Manufactured by Electro-Chemical Devices (ECD)based in USA
The CA900 Series Analyzers are a family of on-line sequential sampling analyzers that use various automated analytical technologies to perform an analysis. When configured for fluoride measurements, titration technology is used for the most cost effective, ease of use and low maintenance ...
-
Manufactured by Electro-Chemical Devices (ECD)based in USA
The Model CA-6 colorimetric analyzer is an on-line sequential sampling analyzer, a sequence of sampling, analysis and result processing is performed and repeated using colorimetric methods. The measurement is a colorimetric analysis using an LED light source and a heated colorimetric cell designed for measuring trace amounts of analyte in ...
-
Manufactured by Electro-Chemical Devices (ECD)based in USA
The Model CA-6 Copper Analyzer is an on-line sequential sampling analyzer, a sequence of sampling, analysis and result processing is performed and repeated using colorimetric methods. The measurement is a colorimetric analysis using an LED light source and a heated colorimetric cell designed for measuring trace amounts of analyte in ...
-
Manufactured by Aerosol Devices Inc.based in USA
The Series 110A Sequential Spot Sampler instrument enables affordable, time-resolved characterization of particulate chemical composition at multiple locations. It provides an uninterrupted collection of particulate matter (PM) as concentrated dry deposits into small sample wells. PM deposits can be analyzed directly ...
-
Manufactured by TCR-Tecorabased in ITALY
50 for PM10 and PM2.5 at 1m3/h. Developed and realized to allow the maximum utilizing flexibility, the ECHO PM satisfies the hardware and software requests that permits up to 2 sequential sampling lines*. Supplied with respective sampling head ECHO PM can be utilized respecting the "ISO/CD 16362 for the determination of policycles ...
-
Manufactured by Environmental Monitoring Systems, Inc.(ems)based in USA
Allergenco MK-3 is a versatile, portable, and ideal sampler for collection of single or sequential indoor air quality ...
-
Manufactured by Delta-Phase Electronics Inc.based in USA
The TA-5 Analyzer is an on-line sequential sampling analyzer that involves multiple points PH measurements based on Titration technologies to perform an analysis. The analyzers can be configured to perform VFA (volatile fatty acids) and Total Alkalinity analysis by using only two reagents. Anaerobic digestion treatment of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you