Air Sampling Equipment in Germany

193 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Air Sampling ×

  • In: Europe ×

  • In: Germany ×

Microdust - Model Pro - Remote Noise Monitoring System / Remote Dust Emissions Monitoring System

by Casella     Distributor in GERMANY

Microdust Pro is a rugged, hand-held, data logging instrument for the real-time detection of airborne dusts, fumes and aerosols. A quick, easy to use instrument, giving the user additional qualitative data which cannot be gained by gravimetric air sampling methods alone. This extremely versatile instrument can also be used with a range of ...


CONNCTOR, M - Model SS-400-1-4 - Swagelok for Air Sampling

by General Oceanics Inc.     Distributor in Bremen, GERMANY

CONNCTOR, M #SS-400-1-4 Swagelok. Tube OD x 1/4 in. Male NPT. Part number: AIRSAMP_18.

Model 1060H - High Vac Bag Sampler

by Cornelsen Umwelttechnologie GmbH     based in Essen, GERMANY

For sample collections of environmental soil vapours, indoor and outdoor ambient air, and ambient VOC’s. For quick, clean sample collections of low ambient air and high vacuum VOC’s vapor collection, the Model 1060H, 1– or 2–Litre High Vac Bag Sampler can easily collect an air sample from an air stream under vacuum up to ...

Model PNS 16-3.1 and PNS 16-6.1 - Sampling Systems

by Comde-Derenda GmbH     based in Stahnsdorf, GERMANY

Automatic sequential sampling systems for sampling PM10 (acc. to CEN12341), PM2.5 (acc. to CEN14907) and PM1 particulates. The dust collection system comprises a low-volume sampler unit (LVS) and a filter changer with an intake tube and sampling head (inlet) to collect particulate matter from outdoor air. It functions as per CEN 12341 (PM10) and ...

Tedlar - Model 24654 - Gas Sampling Bag

by Sigma-Aldrich Co., LLC     Office in GERMANY

Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under ...

AGT - Model MAK 10-2 - Sample Gas Conditioning Systems

by AGT Thermotechnik GmbH & Co.KG     based in Erkelenz, GERMANY

MAKs are compressor coolers for highest demands of sample gas quality.  With optional components (pre-separator, filter, flowmeter, acid dosage, humidity sensor, sample gas pump) you can upgrade MAK sample gas coolers to complete integrated sample gas conditioning systems. The flexible, modular design ensures optimal compatibility to all ...

Model PNS 16T-3.1 and PNS 16T-6.1 - Sampling Systems

by Comde-Derenda GmbH     based in Stahnsdorf, GERMANY

Automatic sequential sampling systems for sampling PM10 (acc. to CEN12341), PM2.5 (acc. to CEN14907) and PM1 particulates: Sampler and filter changer in one compact housing. Magazine with 16 filter cassettes. Replacement magazine with 15 filter cassettes. Continuous monitoring without the manual exchange of filters. Vented housing. For 47 mm ...

Tedlar - Model 24634 - Gas Sampling Bag

by Sigma-Aldrich Co., LLC     Office in GERMANY

Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our valve and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the most ...

Tedlar - Model 24633 - Gas Sampling Bag

by Sigma-Aldrich Co., LLC     Office in GERMANY

Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our valve and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the most ...

Tedlar - Model 24655 - Gas Sampling Bag

by Sigma-Aldrich Co., LLC     Office in GERMANY

General description Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and virtually ...

AGT - Model BCR 01 - Sample Gas Coolers

by AGT Thermotechnik GmbH & Co.KG     based in Erkelenz, GERMANY

BCRs are the allround talents among compressor coolers. They are installed in all applications where pure coolers are needed without additional conditioning equipment.  BCR sample gas coolers can be optionally equipped with PVDF-, glass- and/or stainless-steel-heat-exchangers. Thus BCR sample gas coolers can cool down nearly every gaseous ...

AGT - Model MAK 10-1-TF1-EC1-FM1 - Sample Gas Conditioning Systems

by AGT Thermotechnik GmbH & Co.KG     based in Erkelenz, GERMANY

1 Gas path (PTFE/PVDF). 125 Nl/h per gas path. 1 condensate pump, 1 filter, 1 flowmeter. 1 Electronic control, 3-pole MAK-alarm-contact. Wall-mount housing, mobile version.

Radiello - Model RAD125 - Anesthetic Gases and Vapor Sampler

by Sigma-Aldrich Co., LLC     Office in GERMANY

This kit was developed for sampling of nitrous oxide, isofluorane, ethrane, halothane, and sevorane in surgical theaters. Parts for one complete sampler are packed separately in one sealed and sterile bag. Pack of 10 sterile bags.

Simple Mini-Stack-Probe

by Paul Gothe GmbH     based in Bochum, GERMANY

Probe for the use in small scale furnace stacks. System consist of one bent with bent radius 25 mm. Length of the bent as agreed. Entry thread M 12 x 1 mm for mini nozzles (Material: Stainless Steel). Complete with self regulating electrical heater for filter devices, high performance heater cartridge ca. 220 W, 230V, (default settings: 70°C, ...

Casella - Model Apex2 - Personal Air Sampling Pump

by Casella     Distributor in GERMANY

The Apex2 range are the new generation of personal sampling pumps offering class beating performance combined with a slim ergonomic design. With the addition of Bluetooth® Connectivity you can monitor your sampling from your mobile device without having to disturb the wearer. Email run data alongside any photos or notes to make your reporting ...

Bühler - Model AGF - T - 30 - Sample Gas Filter

by Bühler Technologies GmbH     based in Ratingen, GERMANY

Sample gas streams must be conditioned to provide particulate and moisture-free gas to the analyzer. Some applications require components made of highly corrosion resistant materials while others require inert materials.

Bühler - Model AGF - PV - 30 - Sample Gas Filter

by Bühler Technologies GmbH     based in Ratingen, GERMANY

Sample gas streams must be conditioned to provide particulate and moisture-free gas to the analyzer. TheAGF-PV-30with the Buhler Unique QC bracket provides fine filtration and easy replacement of the filter media without the use of tools. This means the filter media can be changed in a matter of seconds.

Model AGF - VA - 23 - Sample Gas Filter

by Bühler Technologies GmbH     based in Ratingen, GERMANY

Sample gas streams must be conditioned to provide particulate and moisture-free gas to the analyzer. The AGF-VA-23 with the Buhler Unique QC mounting block provides fine filtration and easy replacement of the filter media without the use of tools. This means the filter media can be changed in a matter of seconds.

Model AGF - VA - 350 - Sample Gas Filter

by Bühler Technologies GmbH     based in Ratingen, GERMANY

Sample gas streams must be conditioned to provide particulate and moisture-free gas to the analyser. The AGF-VA-350 provides fine filtration and easy replacement of the filter media without the use of tools. This means the filter media can be changed in a matter of seconds.

Model K-AGF-PV-30-A - Sample Gas Coalescing Filter

by Bühler Technologies GmbH     based in Ratingen, GERMANY

The removal of aerosols from sample gas streams is a requirement in many applications. To meet this need, the Buhler Model K-AGF-PV-30-Afilter makes use of a coalescing element made of borosilicate fibers. The gas stream passes through the element from inside to outside. The aerosols are caught in the matrix forming steadily growing droplets which ...

Need help finding the right suppliers?

Let the XPRTs do the work for you