Air Sampling equipment for Monitoring and Testing in Missouri

  • Model 28520-U - ATIS Adsorbent Tube Injector System 110V

    The Supelco ATIS is a sample preparation device for adsorbent tubes. The Adsorbent Tube Injector System employs the technique of flash vaporization to vaporize the sample into a continuous flow of an inert gas, which carries the sample to the adsorbent tube. The sample pathway of the Adsorbent Tube Injector System is constructed of glass and ...

    By MilliporeSigma Office in St. Louis,, MISSOURI (USA).

  • Radiello - Model RAD125 - Anesthetic Gases and Vapor Sampler

    This kit was developed for sampling of nitrous oxide, isofluorane, ethrane, halothane, and sevorane in surgical theaters. Parts for one complete sampler are packed separately in one sealed and sterile bag. Pack of 10 sterile bags.

    By MilliporeSigma Office in St. Louis,, MISSOURI (USA). from Anesthetic Gases and Vapor Sampler Product line

  • Premium

    Sierra - Automatic Filter Changers

    Sierra’s Automatic Filter Changer is a compact and portable safety and automation tool that should be a part of every emissions test cell. The system allows the engineer to stay out of the test cell during testing so several tests can be done in succession.  The system meets all Federal Register requirements.

    By Sierra Instruments, Inc. Distributor in St Louis, MISSOURI (USA). from Automatic Filter Changers Product line

  • Premium

    Model DL410(CE) - Laboratory Spray Dryer

    The DL410 is a larger capacity spray dryer that can produce fine particles from 40 to 100μm which are considered to be extremely difficult to produce in laboratories.  It is useful for preliminary tests for pilot plant or expensive samples, micro capture spray drying research, substitute for general laboratory drying method, etc.

    By Yamato Scientific America Inc. Distributor in Saint Louis, MISSOURI (USA). from Laboratory Spray Dryer Product line

  • Premium

    DyMaxion - Enclosed Ion Source Gas Analyzer

    Increased sensitivity and decreased background noise are possible due to the ionizer design. An enclosed ion source operates with sample pressures as high as 10-3 torr with no need for futher pressure reduction of this differentially pumped inlet system. Higher sample pressures contain greater numbers of neutrals and more sample to ionize. With ...

    By Ametek Process Instruments - THERMOX Distributor in MISSOURI (USA). from Enclosed Ion Source Gas Analyzer Product line

  • Premium

    THERMOX - Model PreMix 2000 - Analyzer

    The THERMOX PreMix 2000 analyzer accurately and continuously measures the proportions of oxygen and fuel in pre-mix gases, operating in either excess fuel or excess air conditions.  The analyzer is fed a small sample of the air/fuel mixture burning it and them measuring the next oxygen or next excess fuel content of the mixture.

    By Ametek Process Instruments - THERMOX Distributor in MISSOURI (USA). from Analyzer Product line

  • Agilent - Model 7010 Series - Triple Quadrupole GC/MS System

    The Agilent 7010 Triple Quadrupole GC/MS provides the industry’s first attogram detection limits in Electron Ionization (EI) mode. The 7010 GC/MS system’s 0.5 fg OFN Instrument Detection Limit (IDL) (preliminary) is demonstrated at installation verifying unmatched ALS, GC and MS performance. Its high-efficiency EI source produces at ...

    By Agilent Technologies, Inc. Distributor in MISSOURI (USA). from Triple Quadrupole GC/MS System Product line

  • Model ionKey/MS - Mass Spectrometry System

    Easily More Sensitive, Just Turn the Key. With an ionKey/MS System, Waters transforms what your lab can do. By integrating the UPLC separation into the source of the mass spectrometer ionKey/MS gives you: Increased sensitivity, Simplified user experience, The power to perform multiple analyses on limited sample volumes, The power to analyze ...

    By Waters Corporation Distributor in MISSOURI (USA). from Mass Spectrometry System Product line

  • Model 7510-AS - Autosampler

    The Agilent 7510-AS Autosampler is capable of running up to twelve unattended, high resolution samples with random access to all sample locations. The autosampler's air-actuated drive mechanism is compatible with even the highest magnetic field strength and sensors to verify the sample location. The sample holder is easily removed from its base, ...

    By Agilent Technologies, Inc. Distributor in MISSOURI (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you