Alarm Systems Equipment For Monitoring And Testing Available In Moldova
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
EQMS-200A alarm online TVOC monitoring system adopts the PID photoion method for gas detection. The UV light produced by ion lamp irradiates on target gas, and the gas will be ionized after absorbing enough UV energy. The target gas concentration can be detected through the small current produced by gas ionization. ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Particle Measuring Systems’ HSLIS-M50e Deionized Water Particle Counter provides continuous, real-time monitoring of contamination. The instrument makes it easy to understand the characteristics of your working fluid. The combination of high sensitivity and low cost makes it ideal when large numbers of sensors and/or long-term trending are required. Integration of the HSLIS Liquid ...
-
PremiumManufactured by Testo, Inc.based in USA
Hairline cracks in pipes, old and worn out gaskets. Even the tiniest of gas leaks in a natural gas pipe can cause enormous problems. The new testo 316-1 leak detector will help you pinpoint the exact position of a leak when the leak has already been detected using a leak measuring device, for ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 150 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot NO2 is a robust NO2 Gas Monitor that can measure Nitrogen Dioxide parameters in the air. This NO2 gas detector uses Electrochemical Sensing technology to measure total NO2 in the air. The monitor is equipped with the NO2 sensor module. The sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Electronic analytical balances are one of the commonly used instruments in chemical laboratories. Electronic analytical balances are highly sensitive measuring instruments designed to measure mass precisely and detect fine increments. There readability range being 0.1mg – ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
High-technology manufacturing processes often require high-purity gases. The HPGP-101-C High Pressure Gas Probe System provides reliable in-line contamination monitoring for process gases at line pressure. The High Pressure Gas Probe System is compatible with oxygen, hydrogen and most non-toxic gases, and it can be used in many reactive gas monitoring applications. The High Pressure Gas Probe ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Laboratory refrigerators are designed with special features and options for use in the laboratory, Increase your laboratory storage space and keep special samples in their due ...
-
PremiumManufactured by Myron L Companybased in USA
The unique circuitry of the 750 Series II Conductivity Monitor/controllers guarantees accurate and reliable measurements. Drift-free performance is assured by “field proven” electronics, including automatic DC offset compensation and highly accurate drive voltage. Since temperature compensation is at the heart of accurate water measurement, all Myron L® Monitor/controllers feature ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. It is designated as being a “basic” rig, since it lacks the electronically controlled hydraulics and remote control which comes with the “professional” 200 kN CPT crawler. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The High Sensitivity Liquid in Situ (HSLIS-M65e) Liquid Particle Counter provides continuous, real-time monitoring of contamination levels in corrosive liquids, including hydrogen fluoride (HF). A long-standing and ever-popular piece of Particle Measuring Systems‘ (PMS) complete liquid particle counting line, the HSLIS Liquid Particle Counter makes it easy to always understand the ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
An advanced carbon monoxide detector designed to provide early warning of spontaneous combustion in pulverisers for coal and biomass. Specifically designed for early detection of potential fire risk in pulverizing mills in coal or biomass processes, Millwatch monitors and quickly responds to sudden carbon monoxide (CO) build-up, allowing preventative action to be taken before a hazardous ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME MegaSet series is a microprocessor-based multipoint multigas detection and control system that can be used with the GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a true RS485 daisy chain ...
-
PremiumManufactured by Myron L Companybased in USA
Myron L<sup>®</sup> Company’s new 900 Series Multi-Parameter Monitor / Controllers combine Accuracy, Reliability, Simplicity, and Flexibility. The user intuitive GUI (Graphical User Interface) allows easy and complete programmability of the instrument all from the LCD touch screen. These highly accurate instruments have the ability for simultaneous monitoring and controlling ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
The latest new DOSEURO product to improve the already well known high performance pumps. Quickly and Easily is the RAPIDA s motto, thanks to display, control board and different function that allow to immediately adjust the pump ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 510i Smart Probe is a wireless differential pressure probe used for accurate low-pressure measurements. The testo 510i is great for measuring pressure in manifolds, static pressure, and pressure drops in buildings or ventilation systems. Use it to measure the pressure drop across coils and filters, or in ducts and ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Dry heat sterilizer DOF-HAS70A uses high-temperature dry heat to oxidize microorganisms, denature proteins, and cause poisoning due to electrolyte concentration. The main one is to destroy the cell protoplasm through oxidation, so that the microorganisms die, so all microorganisms can be killed within a certain heating ...
-
PremiumManufactured by Aljon by C&C Manufacturing, LLCbased in USA
The ADV525 is Aljon’s mid-sized model with weight ranges between 110,000lbs. & 115,000 lbs. with multiple wheel and cleat configurations for greater maneuverability. The ADV525 can effectively process and compact up to 1100 tons per day, will produce between 572 – 598 Pounds Per Linear Inch of compaction depending on the machine configuration, and is powered by a 543 HP, Volvo ...
-
PremiumManufactured by Senix Corporationbased in USA
ToughSonic CHEM 20 Level Sensor Features: Non-contact level measurement. Rugged construction, IP68 rated. Indoor or outdoor uses. Top and bottom mounting threads. Five outputs plus serial data. Serial data-only models. Temperature compensation. PC ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
The Slick Sleuth® SS300 and SS300EXd are designed for deployment in rugged settings such as offshore, coasts, harbors, inland waterways, industrial facility drainage and outfalls, or anywhere risk of an oil spill is a concern. The SS300 product series are used at refineries, power plants, heavy industries and terminals. These sensors are the optimal solution for detection of oil on water or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you