Only show results in Connecticut? Ok

Ambient Air Monitoring Applications

  • Premium

    Measurement of methyl ethyl ketone, chloroform & carbon tetrachloride in air for remediation & super fund sites

    The Series 8900 Analyzer provides direct measurement of Methyl Ethyl Ketone, Chloroform and Carbon Tetrachloride in ambient air. This instrument is utilized for remediation and Super Fund sites and to monitor workplace exposure limits.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Gas monitoring instruments and systems for print factories

    Typical modern printing processes utilize solvent-based dyes. The evaporation of the dye solvents into the ambient air during the printing process may expose the workers to various chemicals. Depending on the type of solvents in case, the solvents have different long term exposure limits, which should be obeyed. Component specific measurements are necessary to protect the workers from exposure while avoiding unnecessary interruptions to the printing process from false alarms.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Gas monitoring instruments and systems for titanium dioxide

    Titanium dioxide is the most important white pigment used in the polymer industry. It is widely used, because it efficiently scatters visible light, thereby imparting whiteness, brightness, and opacity when incorporated into a plastic product.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Portable and fixed gas analysers for medical gas monitoring

    Geotech supports the monitoring of medical gases within dentistry, hospital and veterinary industries with hand held N2O, O2, CO2 and CO analysers.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    Gas analyzers for clean air room monitoring

    The ambient air in clean air rooms needs to be constantly monitored for the safety of workers and of the production according to the environment. A clean air room is a room where the concentration of particles is controlled in order to minimize the introduction, the generation, retention of particles inside, for instance for chip production or the production of medicines.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Sulfur or odor gas analyzers for ambient air monitoring

    Sulfur compounds = TRSMEDOR H2S / Mercaptans / TOS / TRS. Odor are coming from sulfur or NH3.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Gas analyzers for the food and beverage industry

    Detecting CO2 impurities: Ammonia, Acetaldehyde, Benzene, Total Sulfur Content, Total Hydrocarbons, SO2, COS. Carbon dioxide (CO2) is a commonly used additive in food and beverage industry (e.g. for soft drink, brewery, and champagne carbonation). Its fabrication process can lead to the presence of impurities such as aromatics, BTEX, ammonia, acetaldehyde, Total Hydrocarbons and sulfur compounds (Total Sulfur Content, SO2, COS, mercaptans...).

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Low level measurement of aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring.

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    BTEX in Ambient Air Application using a High-Sensitivity PID

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Air sampling & monitoring systems for government sector

    HI-Q serves the needs of various government agencies with a wide range of application-specific, customized air sampling products. HI-Q works directly with governmental agencies such as the Environmental Protection Agency (EPA), Department of Energy (DOE), Department of Defense (DOD) & Department of Homeland Security (DHS) to develop situation specific, cutting edge air sampling products to help recognize potential threats. Since September 11, 2001, HI-Q continues to have an ongoing relationship with the EPA...

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Gas monitoring instruments and systems for flavoring agents

    Manufacturing of powdered and liquid flavorings and fragrances involves production phases where flavoring chemicals may be released into the ambient air breathed by workers. Exposure control by gas analyzers in the production rooms and laboratories is necessary to ensure that the Time-Weighted Average (TWA) concentrations do not exceed the maximum Permissible Emission Limit (PEL) values.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Measuring aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

    The Series 8900 BTEX Analyzer provides direct measurement of Benzene, Toluene, Ethylbenzene, and Xylenes in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites. The Series 8900 BTEX Analyzer employs a photoionization detector (PID) as the sensing element. This detector is specific to volatile organic compounds. The Benzene, Toluene, Ethylbenzene, and Xylene`s in the gas sample are physically separated using proprietary GC columns.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Gas monitoring instruments and systems for phosgene monitoring

    Phosgene COCl2 is a colorless gas. While it has been used as a Chemical Weapon Agent (CWA) in the past, currently this poisonous gas is also an important reagent in synthesis in the pharmaceutical and chemical industries. The plants using phosgene are typically equipped with gas sensors to detect leaks in the indoor ambient air. The critical situations arise when equipment in contact with the gas at the manufacturing facilities are serviced and maintained. As phosgene is very poisonous, even small gas pockets in...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Gas monitoring instruments and systems for greenhouse gases from Soil sector

    Gasmet manufactures portable and powerful gas analyzers for greenhouse gas flux measurements. All key gas compounds can be measured in seconds: N2O, CH4, CO2, H2O, CO and NH3.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    ADVANCEES - Hydrogen Sulfide Removal Custom skid-mounted water purification equipment

    The presence of hydrogen sulfide in home drinking water supplies is not a health hazard, but is a common nuisance contaminant whose distinctive “rotten egg” odor makes water treatment desirable. Several treatment methods are available, and often hydrogen sulfide can be treated and removed using the same process and equipment used for iron and manganese removal.

    By Advanced Equipment and Services based in Coconut Creek, FLORIDA (USA).

  • Premium

    Measurement of naphthalene in ambient air to monitor workplace exposure limits & at remediation & Superfund sites

    The Series 8900 Naphthalene Analyzer provides direct measurement of Naphthalene in ambient air. This instrument is utilized in industrial plants to monitor workplace exposure limits and at remediation and Superfund sites. The Series 8900 Naphthalene Analyzer employs a photoionization detector (PID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Industrial hygiene - personnel safety gas analyzers for industrial air monitoring

    Industrial companies produce during there manufacturing process toxic compounds such as Benzene or H2S. CHROMATOTEC analysers are able to monitor such compounds. For this kind of applications we generally find ranges of 0.1 to 10 ppm. The corresponding analysers for these applications are the chromaFID and the chromaPID, according to technical specifications (gas to be analysed, environment of the analysis, concentration range,…).

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Air sampling & monitoring systems for biomedical, chemical & pharmaceutical industry

    HI-Q Environmental Product Company provides air sampling instrumentation & systems for several niche applications in a number of disciplines in the broad area of `Life Sciences`. In the Biomedical, Chemical, & Pharmaceutical industries, HI-Q has marketed instrumentation for certain applications for many years. Our ambient, in-door breathing level air samplers, commonly known in the industry as `Goose-Neck` or `Giraffe` air samplers have been instrumental in analyzing workplace exposure. HI-Q has also...

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Gas monitoring instruments and systems for semiconductor manufacturing

    In the semiconductor manufacturing industry, various perfluorinated compounds (PFCs) are used. The emissions of the PFC compounds into the ambient air are reduced by scrubbing of the exhaust gases from the process. In this process, the Gasmet™ FTIR Gas Analyzers can be used to measure the emissions into the atmosphere and also monitor the efficiency of the scrubbers. Typically monitored PFCs in the exhaust gas include carbon tetrafluoride CF4, trifluoromethane CHF3, and hexafluoroethane C2F6.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Measurement of acrylonitrile in ambient air for monitoring workplace exposure limits

    The Series 8900 Acrylonitrile Analyzer provides direct measurement of Acrylonitrile in ambient air. This instrument is utilized in industrial plants to monitor workplace exposure limits. The Series 8900 Acrylonitrile Analyzer employs a flame ionization detector (FID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you