Showing results for: Ambient Gas Analyzer (Ambient Air Monitoring) Equipment
-
Manufactured by CleanAir Europebased in FRANCE
to WHO air quality limits, while costing 3 to 5 times less than a traditional station based on analyzer ...
-
Manufactured by CleanAir Europebased in FRANCE
The E-Sampler is a device for counting particles and dust in the ambient air. The E-Sampler uses a dual laser and gravimetric technology for real-time monitoring of aerosols and particles. Equipped with an acquisition unit, its autonomy on battery (supplied) is 30 hours. This device is suitable for outdoor and indoor measurements and ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MGC101 system automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases. The MGC101 system automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases of interest. It meets all U.S. environmental protection agency ...
-
PremiumManufactured by ENVEAbased in FRANCE
Pure air generator, capable of continuous delivery of up to 20 standard liters per minute (SLPM) of dry, contaminant-free air. The ZAG 7001 is a powerful stand-alone system: it does not require the supply of compressed ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD AL² is the next generation in two-channel ambient air monitoring instrumentation. Unique in speed and precision, the nCLD AL² is modular designed and expandable to additional nitrogen based parameters. Its graphical user interface “GUI“ also individually displays and connects to other instruments’ ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
Using pulsed fluorescence technology, the Model 43i measures the amount of sulfur dioxide in the air up to 10ppm. The pulsing of the U.V. source lamp serves to increase the optical intensity whereby a greater U.V. energy throughput and lower detectable SO2 concentration are realized. Reflective bandpass filters, as compared to commonly used transmission filters, are less subject to ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
Using UV Photometric technology, the Model 49i measures the amount of ozone in the air from ppb levels up to 200ppm.The Model 49i is a dual cell photometer, the concept adopted by the NIST for the national ozone standard. Dual range and auto range are standard features in this instrument. Because the instrument has both sample and reference flowing at the same time a response time of 20 seconds ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
Using chemiluminescence technology the Model 42i-Y measures the amount of nitrogen oxides in the air from sub ppb levels up to 100ppm. The Model 42i-Y is a single photomultiplier tube design that measures NOy which includes most oxides of nitrogen with the exception of NH3 and N2O. Dual range and auto range are standard features in this instrument. Because the instrument is operated continuously ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
Using UV Photometric technology, the Model 49i-PS is able to produce ozone at a rate of up to 5000 ppb.The Model 49i-PS is a dual cell photometer, the concept adopted by the NIST for the national ozone standard. The Model 49i-PS can operate with ozonator flow rates of up to 6 liters a minute. Because the instrument has both sample and reference flowing at the same time a response time of 20 ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
Using pulsed fluorescence technology, the Model 43i -TLE measures the amount of sulfur dioxide in the air down to 50 ppt. The pulsing of the U.V. source lamp serves to increase the optical intensity whereby a greater U.V. energy throughput and lower detectable SO2 concentration are realized. Reflective bandpass filters, as compared to commonly used transmission filters, are less subject to ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
The Thermo Scientific™ 111 Zero Air Supply is designed for applications where pollutant-free levels of NO, NOx, O3, SO2, CO and hydrocarbons are required, with flows up to 20L/min. at pressures of 30psi. This model uses an external compressor; the pressure regulators, chemical scrubbers, reactor and temperature controller are all contained in a single convenient case. ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
Using gas filter correlation technology, the Model 48i measures the amount of carbon monoxide in the air. The Model 48i is based on the principle that carbon monoxide (CO) absorbs infrared radiation at a wavelength of 4.6 microns. Because infrared absorption is a nonlinear measurement technique, it is necessary for the instrument ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
Using gas filter correlation technology, the Model 48i-TLE measures the amount of carbon monoxide in the air. The Model 48i-TLE is based on the principle that carbon monoxide (CO) absorbs infrared radiation at a wavelength of 4.6 microns. Because infrared absorption is a nonlinear measurement technique, it is necessary for the ...
-
Manufactured by Sabio Environmentalbased in USA
The Model 6022 UV H2S Analyzer provides accurate measurement of CS. (Combined Sulfur) or H2S (Hydrogen Sulfide) gas in air or low source. levels from industrial processes. The Model 6022 H2S analyzer uses the. same optical bench as the Model 6020 UV Sulfur Dioxide analyzer. An. efficient H2S converter thermally converts H2S to ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
The Thermo Scientific Model 42i utlizes chemiluminescent technology to measure levels of nitrogen oxides (NO-NO2-NOx) in the emissions from a source. The flagship product in the Thermo Scientific iSeries line, the Model 42i is the most recognized NOx analyzer in the industry. Using chemiluminescence technology, the Model 42i measures the ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
Using chemiluminescence technology, the Model 42i-TL measures the amount of nitrogen oxides in the air from sub-ppb levels up to 1000ppb. The Model 42i-TL is a single chamber, single photomultiplier tube design that cycles between the NO, NOx and Zero modes. The addition of the Zero mode provides for excellent long term stability and extremely low minimum detectable limits. The 42i has ...
-
Manufactured by Sabio Environmentalbased in USA
The Model 6060 UV TRS Analyzer provides accurate measurement of TRS (Total Reduced Sulfur) or TS (Total Sulfur) gas in air or low source levels from industrial processes. The Model 6060 TRS analyzer uses the same optical bench as the Model 6020 UV Sulfur Dioxide analyzer. An efficient external TRS oxidizer/converter thermally ...
-
Manufactured by Sabio Environmentalbased in USA
The Model 6030 Ozone Analyzer provides an accurate and convenient means of measuring low levels of ozone in ambient ...
-
Manufactured by Sabio Environmentalbased in USA
The Model 6030 Ozone Primary Standard is NIST traceable and provides an accurate and convenient means of measuring low levels of ozone in ambient air. Using the Beer-Lambert law, ozone is measured in a single photometric cell by detecting the absorption of ultraviolet (UV) radiation from ozone molecules at a wavelength of 254 ...
-
Manufactured by Sabio Environmentalbased in USA
The Model 6050 CO Analyzer provides an accurate and convenient means of measuring low levels of Carbon Monoxide in ambient air. Principle of IR Analysis - Gas Filter Correlation. Advanced, easy to use, menu-driven software allows access to sample conditions and diagnostics and the strip chart feature allows the user to view a time series ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you