Ambient Air Quality Monitoring (AAQM) Equipment For Monitoring And Testing Available In Vanuatu
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Parallel measuring of up to 4 particle fraction with only one instrument. With the dust analyser EasyPM dust fractions for PM10, PM2.5, PM1 and TSP can be measured parallel with only one ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
The self-developed PMMS-5000 Atmospheric Heavy Metal Analyzer is according to US EPA IO-3.3 standard method. It has realized accurate measurement for the content of heavy metal components, including plumbum,mercury,cadmium,chromium and arsenic in the atmosphere through XRF Non-destructive Detection Technology and Automatic Enrichment technology. It can be widely applied in ambient air quality ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
The zero gas generator provides clean and dry zero-level air. It is mainly applied to zero calibration of ambient air quality monitoring system or analyzer. It can also be used as flushing gas in permeation tube & furnace and oxidant gas for FID analyzer. Zero gas generator includes external oil-free air compressor, pressure and flow controller, water removal system. Based on adsorption, ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
EQMS-200B alarm TVOC online monitoring system adopts PID photoion method for gas detection. The UV light produced by ion lamp irradiates on target gas, and the gas will be ionized after absorbing enough UV energy. The target gas concentration can be detected through the small current produced by gas ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfectly adapted to monitor the efficiency of different Mercury Removal Units (MRUs) in natural gas processing plants. Each mercury on-line system will differ in sample characteristics as well as installation conditions and operating environment. We have the experience to design systems that fully meet the requirements of your particular mercury monitoring ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
EQMS-200 online VOC monitoring instruments adopts PID (photoionization detector) for gas detection. The target gas is irradiated I bombarded by ultraviolet light produced by the ion lamp, and is ionized after absorbing enough UV energy. The concentration of the target gas can be detected by detecting the tiny current generated after the ionization of the gas. This type of VOC monitoring ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS System Shelters give the optimal operation environment for the measurement equipment. They are designed for OPSIS air quality monitoring systems, used for example for traffic monitoring, and industrial fugitive emissions monitoring. Various container models are available, depending on the application and the extent of the monitoring ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Resolution ELPI+ (Electrical Low Pressure Impactor, HR-ELPI+) is an improved version of the widely used ELPI+ instrument. The High Resolution ELPI+ utilizes a data inversion algorithm that gives real-time particle size distribution in up to 500 size classes 6 nm – 10 μm. Other High Resolution ELPI+ features include wide particle sample concentration range, robust ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Gravimetric Impactor (DGI) is a high sample flow rate cascade impactor for low concentration particle measurement applications. The DGI measures gravimetric particle mass size distribution of particles < 2.5 μm in five size fractions. Typical measurement applications of the DGI impactor include engine emission measurements, air quality studies and other low concentration ...
-
PremiumManufactured by ENVEAbased in FRANCE
Automatic systemdesigned for continuous mercury monitoring in natural gas even in hazardous zones (ATEX, IEC-Ex). Each mercury on-line system will differ in sample characteristics as well as installation conditions and operating environment. We have the experience to design systems that fully meet the requirements of your particular mercury monitoring ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS data logger system is designed for data acquisition applications. The data logger can handle analogue and digital input and output signals as well as serial communication. The hardware of the DL256 is based on modules. It is therefore easy to configure the system to meet a wide range of requirements, and the system can be upgraded by adding ...
-
Premiumbased in USA
The FEM-capable Ozone Module helps you confirm ozone attainment. The Clarity Ozone Module is based on best-in-class technology from 2B Technologies, and provides accurate measurements of ozone in air over a wide dynamic range extending from a few parts-per-billion by volume (ppb) to an upper limit of 100 parts-per-million (ppm) based on the well-established technique of absorption of ultraviolet ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
Ammonia analyzer adopts chemiluminescence principle to detect ammonia gas in ambient air, equipped with ammonia reformer and sampling system. The range can be selected between 0-500ppb and 0-2000ppb. The ammonia analyzer is able to reduce ammonia absorption through control of internal sampling gas flow processing of sampling gas path to ensure the response time as well as accurate control of ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Multiplexers are used when an OPSIS system includes more than one lightpath. The use of multiplexers allows a single system to handle several lightpaths, with the analyser’s computer automatically interrogating each in turn. Various models are available, depending on the number of ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
AM-5401 portable ozone analyzer adopts the principle of untraviolet spectrohotometry and combines with advanced micro-processing technology to provide accurate and reliable low-concentration O3 detection of "ppb-ppm" level, which meets application requirements of atmospferic ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The PM10 monitor version of OPSIS’ SM200 particulate monitor provides accurate and reliable automatic measurements of PM10 particulate fraction concentrations in ambient air, as well as sampling of the PM10 particulate fraction for subsequent manual ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS provides a range of sensors for various applications, such as wind speed, wind direction, temperature, humidity, global radiation, and rainfall. They are specially designed to be easily integrated into an OPSIS monitoring system using OPSIS data logging hardware and ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS OC500 ozone calibrator is used to calibrate OPSIS Air Quality Monitoring stations. The calibrator generates a well defined ozone concentration which could be preset by the user. It is designed to generate very high ozone concentrations, sufficient for performing accuracy audit and precision ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
AM-6 Micro Air Monitoring System is a small online environmental monitoring system based on high precision(ppb level) gas sensor. It provides flexiable sensor combination scheme and modular design, as well as online monitoring of PM10,PM2.5,SO2,NO2,O3,CO,VOCs,temperature, humidity and other factors in the atmosphere. Special factors can also be qulckly configured according to the actual ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
The Coriolis Compact is a dry Cyclonic air sampler able to operate up to 8 hours straight and compatible with multiple downstream analysis (NGS, qPCR, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you