Ammonia (NH3) Monitoring Equipment For Monitoring And Testing
-
PremiumManufactured by ENVEAbased in FRANCE
Ultra-fast NH3 measurement (Ultra-fast response time : < 2 seconds). The use of the UV range for the measurement of NH3 has been specifically selected to avoid any interference with other major emission gases (CO, CO2, H2O etc..) that do not absorb in the ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The Multi-Zone Gas Leak Monitor HGM-MZ offers superior performance, flexibility and functionality for low level continuous monitoring of refrigerant gases used in most commercial systems including: Chlorofluorocarbons (CFC / FCKW), Hydrochlorofluorocarbons (HCFC / H-FCKW), Hydrofluorocarbons (HFC / HFKW). Separate monitors are available for Ammonia (NH3 - AGM-MZ) and Carbon Dioxide (CO2 - ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The GasLab Plus CM-507 is a CO2, PM2.5, PM10 and Ammonia multi-gas detector designed for indoor agriculture applications like poultry farms. Large easy-to-read display and audible alarm for high CO2 levels included. Built-in data logging allows all information to be recorded on a removeable SD card for data analysis. ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Measures hydrogen and noble gases in corrosive gases. The CALOMAT 62 is a thermal conductivity analytical device specially designed for applications in corrosive gases. Concentration of gas components such as Cl2, HCl, and NH3 can be measured directly, along with H2 and N2 in aggressive environments, for example. This results in a number of possible applications such as in chlor-alkali ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II family of ion mobility spectrometers for airborne molecular contamination (AMC) detect and alert users to small concentrations or changes in airborne levels of chlorides, acids, amines and ammonia-containing species. With parts-per-trillion (ppt) sensitivity, these point-of-use sensors provide fast response, increased detection selectivity and repeatable performance. Combining ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfect ammonia gas analyzer or multi-gas analyzer for the measurement in hot & wet flue-gas of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CO2, O2 and ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Ammonia from animal farms and industrial processes are getting more and more attention from governmental organisations. In higher concentrations the smell becomes a problem. Nowadays regulations are becoming more strict to reduce ammonia emisions. The robust and sensitive ammonia analyser from LSE Monitors is designed for continuos online measurements for ambient air or for measurements in ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Ammonia analyzer adopts chemiluminescence principle to detect ammonia gas in ambient air, equipped with ammonia reformer and sampling system. The range can be selected between 0-500ppb and 0-2000ppb. The ammonia analyzer is able to reduce ammonia absorption through control of internal sampling gas flow processing of sampling gas path to ensure the response time as well as accurate control of ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot NH3 is a robust NH3 Gas Monitor that can measure ammonia levels in the air. This NH3 gas detector uses electrochemical sensing technology to measure ammonia concentration in the air. The industrial ammonia monitor is equipped with an electrochemical sensor. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Ammonia is a gas that easily dissolves into water, there are several common detection methods,but ammonia is toxic and corrosive, the current measurement mainly uses the TDLAS direct measurement method. TDLAS is essentially a spectral absorption analysis technology, which uses the selective absorption characteristics of gas molecules for specific wavelength lasers, and analyzes the changes in the ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Designed for the detection of explosive gases, toxic gases or oxygen, this gas detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). Whatever your application Teledyne Gas and Flame Detection offers a solution: catalytic, electrochemical, semiconductor, or poison control version. ATEX approved, these detectors are available in explosion safe or intrinsically safe ...
-
Manufactured by Aerodyne Research, Inc.based in USA
Sensitive, rapid, highly specific and continuous measurements of multiple atmospheric trace gases in ambient ...
-
Manufactured by In-Situ Processbased in USA
A ChemScan® On-Line Analyzer can automatically provide operators with timely process chemistry measurements, without the need for frequent manual sampling or laboratory ...
-
Manufactured by Sabio Environmentalbased in USA
The Model 6042 NT/NH3/NOX Analyzer provides accurate measurement of NT (Total Oxides of Nitrogen), NH3 (Ammonia) and NOX (Oxides of Nitrogen) gas in air or low source levels from industrial processes. The Model 6042 NH3 analyzer uses the same optical bench and electronics as the Model 6040 NO/NO2/NOX Analyzer and will be referred to as the NOX analyzer. The Model 6042 uses the chemiluminescence ...
-
Manufactured by Chemmit Analytical Solutionsbased in TAIWAN
Ammonia (NH3) is characterized by its distinct urine smell and also a toxic waste produced from living organisms. It is recognized as a lethal substance in a biological system. Ammonia dissolves easily in water and it leads to producing NH4OH. If the water contains over 1.5ppm within Ammonia concentration in drinking water, it will result in certain levels of illness. Natural Ammonia content in ...
-
Manufactured by Rel-Tek Corporationbased in USA
ToxiBoss is a wall mounted gas sensor with interchangeable sensing heads to cover a wide variety of toxic gas situations. It is approved intrinsically safe for hydrogen (Group B) environments. Its Class I, Div 1 and 2, Group BCD approval means that it may be used in any hazardous gas environment, except acetylene. And, being intrinsically safe, it can be serviced in place without having to ...
-
Manufactured by BioAssay Systemsbased in USA
Application: For quantitative determination of ammonia/ammonium concentration by fluorimetry at 360nm/450nm (compatible on handheld fluorimeter catalog# ...
-
Manufactured by Boulden Companybased in USA
Centrifugal compressors use labyrinth seals at the impeller eyes, between impellers, and at the balance drum. The purpose of the labyrinth seals is to reduce flow between stages; therefore, tight clearance and minimum flow between stages is an important factor in centrifugal compressor ...
-
Manufactured by CSG PVTech Co., Ltdbased in CHINA
Several decades of experience in manufacturing, the complete PV chain including silicon materials, ingot, wafer, solar glass, solar cell.solar module and solar project, and ISO90001 & ISO14001 certified factory, ensure excellent raw materials and production ...
-
Manufactured by Teledyne APIbased in USA
The Model T201 combines a specially configured chemiluminescence analyzer with an external thermal converter to give stable and repeatable NH3 measurements at very low levels. In addition, the T201 provides simultaneous values for NO, NO2, and NOx concentrations. The T201 is ideal for trace ammonia monitoring applications in ambient air as well as in clean rooms and make-up air units. Optional ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you