Analytical Instruments Equipment For Monitoring And Testing Available In Myanmar
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
AAS for graphite furnace and hydride technology. Cost-effective trace analyzer for recurring measurement tasks. The analyzer for you - high-performance AAS for routine laboratories. Cost-effective - top performance at low investment and operating costs. Simple - easy handling thanks to user-friendly concepts. Reliable - stable measuring conditions due to robust components and clever design. ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The flexible system with ultimate sensitivity and targeted performance optimization using various accessories for advanced research: Ultimate freedom of optimization through full ion focus control. Shortest dwell time and best mass separation. Flexible connection of accessories using two entry ports to the plasma compartment. ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 889 IC Sample Center is a robust Autosampler for high sample throughput, optimized for the challenges of the modern analytic laboratory. It works in accordance with the x-y-z principle and a syringe control with high resolution for precise sample injection. A double needle system enables the penetration of vessel caps and septa. A PEEK injection valve completes the automation system of the ...
-
PremiumManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
Finally, a Flame Photometer specific to your needs. The first simultaneous Flame Photometer with built in compressor and configurable element analysis to your requirements. The BWB Flash is the first and only fully configurable up to four channel flame photometer that detects and displays all calibrated ions at the same ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
AAS for flame, graphite furnace, and hydride technology. The all-rounder with an automatic atomizer change for flame, hydride, and graphite furnace technology, for routine laboratories with changing requirements and moderate sample quantities. The analyzer for you - high-performance AAS for routine laboratories. Cost-effective - top performance at low investment and operating costs. Simple - easy ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The Turbo variant of our best selling Colt 4 incorporates a much larger mass, precision machined heat exchanger block, and 2 x 1100w Firerod cartridge heaters switched via a solid state relay. The result - almost twice the smoke output of the standard Colt 4, and the ability to make smoke "Off Power" for longer - because it has a greater amount of retained energy within the heat exchanger. With ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The PermaCal has been developed in collaboration with the METAS (Swiss Federal Institute of Metrology). The most complex configuration consists in a double stage dilution and permeation system. The device can be available in a portable or rackable casing. The portable version is equipped with a battery and an internal pump with dryer that will provide flow to the permeation oven during the ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The robust system for efficient and stable characterization of high matrix samples: Outstanding plasma robustness for high matrices. Minimized drift at changing matrix load. Efficient interference management with outstanding ease of use. ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Analytical balances are highly sensitive lab instruments. The Analytical balances are a special type of balance that offers very accurate measurements, designed to measure small mass in the sub-milligram range. usually used for precision measuring instruments used in quantitative chemical analysis, BA-E series readability up to 0.0001g. ...
-
PremiumManufactured by Fluxana GmbH Co. KGbased in GERMANY
Use drift monitors to ensure the long-term stability of your calibration. Long-term Stable Drift Monitors (Control Samples) for Drift Correction. Like most analytical instruments, X-Ray fluorescence spectrometers show changes in their analytical performance over time. The X-Ray tube loses intensity and the detector loses sensitivity after using them for a while. This negatively affects ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1306 Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Series 3300 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Measures hydrogen and noble gases in corrosive gases. The CALOMAT 62 is a thermal conductivity analytical device specially designed for applications in corrosive gases. Concentration of gas components such as Cl2, HCl, and NH3 can be measured directly, along with H2 and N2 in aggressive environments, for example. This results in a number of possible applications such as in chlor-alkali ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Specializing in hydrogen and noble gases: For continuous measurement of hydrogen and noble gases, the specific thermal conductivity of the sample gas mixture is measured and used to calculate the concentration. Only binary gas mixtures can be measured directly. If more than two components are present, the concentrations of all other components must be measured separately using other measuring ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Worldwide solutions for today's process analyzer needs. Todays challenges: specifying, building, installing, commissioning, and operating analytical measurement systems in today’s process plant. Now you’ve got more than just the process to measure. The job also includes air, water, and by-products that once were not considered worth measuring. Worldwide competition also means fewer ...
-
PremiumManufactured by Questron Technologies Corporationbased in CANADA
QAsh achieves fast ashing times by combining in-situ airflow with a microwave. It has a large floor area to accommodate a large number of samples and is suitable for polymers, oils, food, pulp, sludge, and many other sample ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Electronic analytical balances are one of the commonly used instruments in chemical laboratories. Electronic analytical balances are highly sensitive measuring instruments designed to measure mass precisely and detect fine increments. There readability range being 0.1mg – ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The DC-200 Dynamic Diluter uses high-precision mass flow controllers (MFC) to accurately controls the flows of dilution gas and standard gas so as to get standard gas of required concentrations. The standard gas path is made of passivated stainless steel tubes and is heated throughout to reduce the impact of sample residues on dilution accuracy. The product is mainly used in plant boundaries, ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The OXYMAT 6 also meets the high standards in demanding applications through modern electronics, ease of operation, and a physical element that is adapted to the measurement ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The AirGen series ZA FID Air is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the ZA FID Air can purify up to 30 L/min of compressed Air and can bear a pressure up to 7 bar (101 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The AirGen series KZA FID Air is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the ZA FID Air can purify up to 15 L/min of compressed Air and can bear a pressure up to 7 bar (101 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you