Analyzer Systems Applications available in West Virginia
-
Premium
Continuous emissions monitoring solutions for H2S monitoring
To monitor H2S can be difficult. The UV absorption is without structure and the IR absorption has strong interference from H2O. The traditional way has been to remove all SO2 from the sample while keeping H2S, then convert H2S to SO2 ,and finally measure SO2 which then effectively yields the H2S concentration. The instruments used have often been ambient air SO2 analysers and extractive dilution systems. However, it is not unusual to experience practical problems with these type of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas analyzers and monitoring systems for First response
The first response encounters hazardous gases that need to be identified quickly. Gasmet manufactures portable and powerful gas analyzers for these crucial measurements. Measure a vast variety of gases simultaneously, on-site. Read about our solutions for First ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas analyzers and monitoring systems for fire & material testing
Sampling and analysis of fire effluents is an important part of assessing both the environmental impact and the threat to life caused by fires. Detailed knowledge about the composition and concentration of fire effluents is required to gain a good understanding about the potential impacts of fires and for efforts to diminish these impacts. Testing the composition of these fire effluents presents a challenge for the analytical equipment used to measure the gases. The amount of species and concentrations of interest ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Continuous emissions monitoring for real driving emissions
There are many cars that have a large impact on the environment in many places around the world. The emissions from fossil fuel cars are too high, and previous test methods have not given the full picture. Tests in a laboratory has, so far, been made indoors, in laboratories, and they do not match the reality, as they do not take into account the real driving conditions. Therefore, we have developed an accurate and reliable monitoring system that can measure the emissions in real life conditions. Based on our core ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas analyzers and monitoring systems for container monitoring sector
In addition to miscellaneous products, shipping containers might contain toxic gases that present health hazards for workers opening or unloading them. Gasmet manufactures portable and powerful gas analyzers for measuring these hazardous gases inside enclosed spaces. With our solutions, you can measure vast variety of gases simultaneously in ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Air sampling & monitoring systems for environment industry
Researchers and Engineers utilize HI-Q air sampling equipment and systems for analyzing and investigating environments around the world. Data collected by HI-Q air sampling systems have provided critical information in the identification and prevention of pollution. HI-Q offers a line of high volume (TSP-Type) air sampling systems for data collection in perimeter monitoring & industrial emissions monitoring ...
By HI-Q Environmental Products Company, Inc. based in San Diego, CALIFORNIA (USA).
-
Premium
Gas monitoring instruments and systems for flavoring agents
Manufacturing of powdered and liquid flavorings and fragrances involves production phases where flavoring chemicals may be released into the ambient air breathed by workers. Exposure control by gas analyzers in the production rooms and laboratories is necessary to ensure that the Time-Weighted Average (TWA) concentrations do not exceed the maximum Permissible Emission Limit (PEL) ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas analyzers and monitoring systems for fertilizer and nitric acid production sector
Nitric acid is manufactured from ammonia and is a key chemical in the manufacture of fertilizers. This is the main reason why nitric acid is produced in such large quantities. The production process of nitric acid produces nitrogen oxides (NOx), ammonia (NH3) and nitrous oxide N2O ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas Analyzers for Cement Plant
Gas analyzer systems in cement plants are used to measure the gases emitted from kilns and ...
By Enviro Solutions Technology Co.,Ltd based in Wuhan, CHINA.
-
Premium
XRF Spectrometers solutions for petrochemical industry
Multielement analysis in the petrochemical industry is increasingly handled by XRF analyzers. X-ray fluorescence analysis is the most suited analytical method to support all processes, that are made during the production of petrochemical products. Elvatech offers powerful and productive instruments for analysis of petroleum products, such as automotive fuels (gasoline, diesel), lubricating oil, crude oil, heavy fuel oil and other. This products is analyzed for sulfur and chlorine content, for wear metals and ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
Gas analyzers and monitoring systems for Industrial hygiene
Indoor air quality is a key part of industrial hygiene. Measuring a vast variety of compounds simultaneously helps to ensure that the air quality doesn’t threaten the health of people. Portable Gasmet gas analyzers are the ideal solution for industrial hygiene ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas monitoring instruments and systems for nitric acid process
Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Continuous emissions monitoring solutions for mercury monitoring
Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Water treatment solutions for oil & gas industry
The complex Oil and Gas industry has a significant impact on water resources due to its water-intensive operations and to avoid environmental harm. At AFA, we go above and beyond by helping to prevent equipment and control failures, help mitigate environmental and financial risk, and by staying on the cutting edge of research and innovation in this rapidly changing ...
By Arthur Freedman Associates, Inc. (AFA) based in Dyer, INDIANA (USA).
-
Premium
Gas monitoring instruments and systems for engine emissions measurements
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
3D measurement technology solutions for reverse engineering sector
Reverse engineering is a process that involves measuring a physical object and reconstructing it as a 3D model to recover the design intent—a perfect reconstruction of the original design—in terms of simple analytical surfaces (planes, cylinders, etc.) and freeform surfaces (NURBS) in order to produce a new reference CAD model. As CAD engineers and industrial designers, you have the critical task of adapting and maintaining parts with shapes that are frequently organic and complex. Since the CAD models ...
By Creaform - AMETEK, Inc based in LĂ©vis, QUEBEC (CANADA).
-
Premium
XRF Spectrometers solutions for sulfur in oil sector
Analysis of sulfur in oil and petroleum products, such as gasoline, diesel fuel, motor and transmission oils, is one of the most important tasks. Utilizing a reliable sulfur analyzer is crucial in this context, as it ensures that the sulfur content meets the stringent regulations set forth by authorities. Sulfur forms sulfites in car exhausts, which pollute the environment. The maximum permissible level of sulfur in fuel is reduced yearly. The Directive 2003/17/EC (or EURO VI) requires that the sulfur content of ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
Chemical Water Treatment for equipment & engineering
Equipment and Engineering offers the right solution for your application of Kurita Products. Starting from simple dosing pumps up to specific dosing systems for special applications Kurita provides you the right solution for your application. Moreover Kurita offers also monitoring and control equipment to analyze that the right concentration of your Kurita products is being used in your system. Further Kurita provides specific equipment to follow the KPIs of your system, so you can be sure that the expected ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
XRF Spectrometers solutions for lead in paint analysis industry
Lead is a toxic and harmful element. Lead can affect the central nervous system. Government regulations are working on drawing attention to lead in paint inspection. It's hazardous not only for children but adults as well, especially construction workers, experts in demolition and renovation. Inhaling lead dust or working with contaminated materials may lead to high blood pressure and dementia, among other health concerns. That's why X-ray fluorescence testing is so important ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
Gas analyzers and monitoring systems for carbon capture & storage (CCS)
Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you