Monitoring & Testing Applications available in Georgia

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high energy consumption, larger emissions and limited flexibility regarding altering feed materials. Due to its unique design, the complications outlined above are avoided throughout the VacuDry® process. When it comes to treating standard oily wastes, mercury-containing waste streams, NORM, and especially for the recovery of highly valuable drilling fluids from drill cuttings; our vacuum thermal desorption process (i.e. vacuum distillation) is economically unbeatable.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    NORM Waste Plants for Oil and Gas Industry

    Natural Occurring Radioactive Material consists of materials enriched with radioactive elements found in the environment. They are usually brought to the surface by oil and gas exploration or mining. NORM wastes can be treated in a VacuDry® unit in order to prepare it for a safe sub earth disposal. Find more information, important key facts and the benefits of VacuDry® NORM waste plants on http://www.econindustries.com/applications/norm-waste

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Mercury Waste Plants for Oil & Gas Industry

    Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Chromatography laboratory instrumentation for environmental analysis

    Determining pollutants in environmental and food matrices requires efficient sample preparation and analytics. BUCHI provide a wide selection of solutions for reliable, flexible and safe sample processing procedures in the laboratory work flow for environmental analysis.

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Chromatography laboratory instrumentation for pharmaceutical

    Drug discovery and development for pharmaceutical industries require safe, efficient and compliant sample preparations and analytics. BUCHI offers a variety of reliable solutions for regulated pharmaceutical laboratories.

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Chromatography laboratory instrumentation for chemical

    Cost effective, safe and sustainable processes play a key role in the chemical industry. To cover those needs BUCHI offers a variety of reliable solutions for R&D, quality control and production.

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Power Generation

    MEGTEC is actively involved in providing Power Generation solutions for many applications ranging from utilizing process heat recovery systems to utilization with boilers, to recovering and utilizing Ventilation Air Methane (VAM) from coal mines. MEGTEC has developed VAM processing technologies for either abatement only and in combination with energy recovery and utilization. MEGTEC’s proven technologies are destroying methane while generating high quality carbon credits, electricity for coal mines and heating for local communities and facilities.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Reverse Osmosis Water Testing

    Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important process for a wide variety of applications including: medical, laboratory, desalination, industrial wastewater, Deionized (Dl) pretreatment, and drinking water.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Parallel evaporation in environmental consultancy

    For a fast and effcient sample concentration in order to monitor de pollution of the environment

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Laboratory evaporation for pharmaceutical

    BUCHI offers a variety of reliable solutions for regulated pharmaceutical laboratories

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Wastewater Treatment

    Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Water monitoring technology for flow & discharge

    Measuring water flow and discharge to determine the amount of water flowing through an open channel is critical for predicting water availability and flood events, allocating watering, and more.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Premium

    Water monitoring technology for nutrient monitoring

    Continuous monitoring of nutrient levels provides crucial information about daily, seasonal and event based changes in water quality conditions, and can be a strong indicator on the overall health of the water body.  In recent years, monitoring of nutrients has grown in importance as it has come to the forefront in regulatory compliance of water quality in many regions.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Premium

    Laboratory Analytical - Density Concentration Tables

    With predefined formulas or concentration tables the density meter converts the measured density value automatically into the desired concentration unit. The density meters from Mettler Toledo have already built in formulas and concentration tables for the most common applications.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Laboratory Weighing - Pipette Calibration

    To ensure data integrity regular pipette performance testing and pipette calibration are fundamental to monitor the accuracy of your pipettes. Testing pipette performance with a balance plays a critical part in this testing approach. METTLER TOLEDO offers solutions for occasional performance testing up to professional pipette calibration according to ISO8655. We can support you in finding the right mix between self made pipette calibration and professional service support tailored to your needs.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    AutoChem - Particle and Droplet Processing

    Optimize Multiphase Processes With In Situ Video and Real-Time Particle and Droplet Measurements. Particles and droplets are everywhere in the chemical, consumer products, pulp and paper, and petroleum industries. Particles grow, agglomerate, break, dissolve, and change shape - all of which can have an impact on process performance and product quality. To be successful, chemists and engineers must understand and optimize particle size distributions to control process efficiency such as stability, separations, or flow properties. In addition, particle and emulsion distributions must be well controlled to ensure repeatable product yield, shelf life, and bulk density.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    AutoChem - Process Analytical Technology (PAT)/Quality by Design (QbD)

    Process Analytical Technology (PAT) has been implemented for years, particularly by the chemical industry for the control of chemical processes. More recently, PAT has become a cornerstone of the US Food and Drug Administration’s (US FDA) Quality by Design (QbD) initiative for both the design and control of quality processes. For this reason, the pharmaceutical industry is also active in utilizing PAT tools. PAT tools can be implemented in both the lab and the plant, with laboratory PAT focused more on the design of a quality process and with plant PAT focused on the monitoring and control of the process.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    AutoChem - Formulations and Product Development

    The particle size distribution is one of the most critical parameters in drug product quality. Real time understanding and control of particles ensures Quality by Design (QbD) in solid and liquid dosage formulation. FBRM and PVM Process Analytical Technologies (PAT) provide in-process real time measurements of particle dimension, particle shape, and particle count. FBRM and PVM are used to promote faster formulation development, improve process confidence, and control batch-to-batch consistency.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you