Monitoring & Testing Applications available in Indonesia
-
Premium
ADVANCEES - High TDS Reduction - Custom skid-mounted water purification equipments
There are potential health effects caused due to high TDS content in drinking water. The hard water will taste bitter, salty, or metallic and may have unpleasant odors. High TDS water is less thirst quenching. High TDS interferes with the taste of foods and beverages, and makes them less desirable to consume. Some of the individual mineral salts such as Nitrates, Sodium, Sulfates, Barium, Cadmium, Copper and Fluoride that make up TDS pose a variety of health hazards such as causing stiffness in the joints, ...
By Advanced Equipment and Services, Inc based in Coral Springs, FLORIDA (USA).
-
Premium
Determination of selenium in drinking water by fluorimetric method
Introduction Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of selenium in drinking water samples using the FLUORAT-02 ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Industrial solutions for boiler feedwater impurities
Problem: Poor water quality can result in significant operational problems and possible shut down of boiler systems. To limit the potential for scaling, deposition and corrosion, most boiler water is treated physically or chemically to remove impurities and improve efficiency in the ...
By Real Tech Inc. based in Whitby, ONTARIO (CANADA).
-
Premium
Nitro - Shortcut Nitrogen Removal
Small footprint. Large impact. Nitro provides shortcut nitrogen removal for high-strength sidestream wastewater flows using MABR technology - saving time, money, and carbon footprint. Nitro is a powerful, energy-saving solution for streams containing high levels of nitrogen, including: Anaerobic digestion Co-digestion Leachate Compost Swine or cow farms Fertilizer ...
By Fluence Corporation based in White Plains, NEW YORK (USA).
-
Premium
ADVANCEES - Formation Water Custom skid-mounted water purification equipments
Oil and grease in formation water includes free oil, dispersed oil (small oil droplets), and emulsified oil. Oil and grease discharge, along with produced water, involves compliance with stringent regulations. Oil and grease removal methods depend on the end usage of treated water and composition of oil in the produced water. For more info contact us at ...
By Advanced Equipment and Services, Inc based in Coral Springs, FLORIDA (USA).
-
Premium
Channel networks solutions for replacement of measurement with inverted syphon sector
Rectangular concrete channel, approx. 2.5 x 2.5 m (w x h). Part filled. Impoundage shield installed later in the channel with inverted syphon and EMF DN ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Gas detection in water & waste industry
Wastewater and potable water treatment facilities produce and use various toxic and explosive gases such as methane, hydrogen sulfide, ammonia, carbon dioxide, carbon monoxide, chlorine, ozone, etc. In addition, in confined spaces, the increased formation of toxic gases and the decreased concentration of oxygen make these areas particularly dangerous for workers. The risk can be evaluated by measuring worker exposure to various pollutants present in the air in work areas. The measured concentrations are then ...
By Teledyne Gas and Flame Detection based in Arras Cedex, FRANCE.
-
Premium
Advanced oxidation water treatment solutions for water reclaim sector
UV, Ozone and Advanced Oxidation Technologies are innovative approaches to safely disinfecting and destroying organic pollutants in water, industrial waste waters, ground waters and gas effluents. These processes do not simply transfer pollutants to other mediums. Unlike other disinfection and oxidation techniques, UV, Ozone and advanced oxidation processes do not create toxic by-products. The ultimate end products of the advanced oxidation processes are carbon dioxide and ...
By ESCO International (EI) based in Glan Conwy, UNITED KINGDOM.
-
Premium
Channel Networks - Fix Installation Measurements for no shutting down the flow areas
The need to replace the existing Time of Flight without shutting down the flow. 4m deep channel. Application required to be installed in just 1 ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Pumps and Dredging Systems for Dredging
Dragflowprovides advanced systems for dredging activities, with a selection ofstate-of-the-art dredgers and pumpsthat offer the best compromise between durability and ...
By Dragflow S.r.l. based in Roverbella (MN), ITALY.
-
Premium
TOC/TNb analysis for wastewater industry
By Analytik Jena - an EndressHauser Company based in Jena, GERMANY.
-
Premium
ADVANCEES - Arsenic Removal - Custom skid-mounted water purification equipments for arsenic removal
Arsenic is a naturally occurring element found in soils and groundwater. Arsenic concentrations vary in accordance with geographic location. When arsenic levels are found to be too high at a specific location, it may be necessary to treat water to remove it. Arsenic usually exists in two different forms, or valences, in a natural setting depending on the amount of oxygen available in groundwater. In more shallow aquifers with higher levels of oxygen, arsenic will usually exist as arsenate, As (V). In deeper, ...
By Advanced Equipment and Services, Inc based in Coral Springs, FLORIDA (USA).
-
Premium
Flowing Waters - Flood Protection solutions for Seepage Measurement in Dam
Application: Dam wall 130 years old, approx. 500 m length, made of quarry stone with clay core. Gallery inside of dam wall to check seepage volumes. Seepage volumes ranging from ml/s to l/s. Currently seepage water volumes are manually determined once per ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Determination of anionic surfactants in water by fluorimetric method
Anionic surfactants (A-SAS) represent, by volume, the most important group of surfactants used in cleaning products and the oldest and the largest volume anionic surfactant is soap. In concentrations 0.1 ~ 1.0 mg/L A-SAS become toxic for aquatic environment. Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of anionic surfactants in water samples using the FLUORAT-02 analyzer. The method became the Interstate standard for anionic surfactant in water ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Determination of inorganic anions in water samples
Introduction The method allows determination of inorganic anions (chloride, nitrite, sulfate, nitrate, fluoride, and phosphate as soluble ortho-phosphate) in samples of natural, potable, and cleaned waste ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Inspection of throttle equipment for hydraulic inspection
Definition of Task: Metrologic inspection of throttle equipment according to German self-control ordination (EKVO). Verification of approved pipe volume of Q = 10 l/s (readings must not vary by more than 20 % from reference ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Octaform – Water & Wastewater Containment
A proven PVC stay-in-place concrete forming system to extend service life and performance of water containment and digestion tanks – offering a durable, water-tight membrane that is highly resistant to corrosion and low-pH ...
By Octaform Systems Inc. based in Vancouver, BRITISH COLUMBIA (CANADA).
-
Premium
Determination of aluminium in water by fluorimetric method
Aluminium is the most abundant metallic element and its salts are widely used as a coagulation treatment agent. At the same time increased levels of aluminium may lead to renal diseases and cause undesirable color and turbidity of distributed water. There are practicable levels of aluminium in water based on optimization of the coagulation process at drinking-water plants: 0.1 mg/L or less for large water-treatment facilities and 0.2 mg/L or less for small. Lumex Instruments provides accurate and selective ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Process instrumentation and analytics solutions for water and wastewater industry
As one of the world’s leaders in industry automation and an experienced provider of integrated technologies, we offer products and systems tailored to the requirements of the water and wastewater ...
By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).
-
Premium
Determination of inorganic cations in water samples
Introduction The method allows determination of ammonium, lithium, sodium, potassium, magnesium, calcium, strontium and barium cations in samples of natural, potable, and waste water by the capillary electrophoresis ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you