Monitoring & Testing Applications available in Italy
-
Premium
Fully-automated gas chromatographs solutions for process control sector
Bring your chemical processes under control for the purpose of efficiency improvement, output optimisation, quality control and waste reduction. Synspec analytical equipment, whether gas chromatograph or laser-based, will help to achieve your efficiency, optimisation, environmental and sustainability ...
By Synspec BV based in Groningen, NETHERLANDS.
-
Premium
Flame Photometer for Measurement of Sodium and Potassium in Dried Milk
Dried milk was dissolved into an aqueous solution for analysis via flame photometry. The test solutions and reference solutions are measured directly following dilution with deionised distilled ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
Respirometry solutions for culture activity tests sector
Waste Type:Synthetic (Acetic Acid). Objective: To monitor the gas produced by steady-state cultures receiving acetate as the input substrate. Another objective was to verify the consistency of gas production over a period of time as a means of verifying culture stability and test ...
By Challenge Technology based in Springdale, ARKANSAS (USA).
-
Premium
Static and rotary torque sensors solutions for automotive industry
Datum Electronics standard torque and power measurement solutions have long been successfully used in the automotive industry in many applications including: Vehicle power efficiency trials, vehicle driveline condition monitoring, tractor power take off measurement, high-speed torque measurement with the formula 1 teams, load, stress & strain measurement on heavy vehicle axles. With our range of both inline and directly installable torque and power measurement sensors, we can find the correct torque measuring ...
By Datum Electronics Ltd based in East Cowes, UNITED KINGDOM.
-
Premium
Milling process control
NIR-analyzer InfraLUM FT-12 is used for quality control of flour and by-products at all milling stages. With InfraLUM FT-12 analyser is possible to create, localize, and update calibration models. Installation and calibration using Customer’s samples are made at the Customer’s lab. ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Optronics – Surveillance systems for Police intervention
Hidden or camouflaged persons pose a threat to police ...
By Bertin Technologies based in Montigny-le-Bretonneux, FRANCE.
-
-
Premium
XRF Spectrometers solutions for clays and oxyde sector
XRF analysis is a simple and fast method for quantitative analysis of silicate materials, cements, ceramics and natural minerals. The main advantages of X-ray fluorescence analysis are simplicity of sample preparation, high accuracy and speed of ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
Measurements Solutions for Form & Flatness
Manufactured surfaces can take on many shapes and sizes. For surfaces where the characterization of shape is function critical, ZYGO laser interferometers and 3D optical profilers stand out with sub-nanometer repeatability of non-contact surface data. Incorporating industry standards for form and flatness into Mx™ analysis software creates a single stop measurement tool for surface inspection. Explore the solutions for your application in surface form and flatness metrology ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Determination of amino acids in beer and wort by capillary electrophoresis
Free forms of amino acids in beer originate mostly from malt. The following method enables fast quantitative determination in beer and wort of the following free amino acids: arginine, lysine, tyrosine, phenylalanine, histidine, leucine and iso-leucine (total), methionine, valine, proline, alanine, glycine, cystine, tryptophan, aspartic and glutamic acids. Total content of amino acids is fdetermined after hydrolysis of proteins. ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Determination of inorganic anions in aqueous matrices according to EPA 6500 and ASTM D6508-10 test methods
This test method is applicable for determination of the dissolved inorganics anions; fluoride, bromide, chloride, nitrite, nitrate, ortho-phosphate, and sulfate in aqueous matrices using capillary ion electrophoresis with indirect UV detection. The method can be applied to drinking water, wastewater and ground water. ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Measurements Solutions for Dimensional Analysis
ZYGO can extend its capabilities to enable sub-pixel 2D metrology from the same data used to report 3D metrology results. Users have the choice of using either height or intensity data to make these lateral measurements. Parameters such as line and space widths, hole dimensions, and feature to feature relationships are possible. ZYGO’s 2D metrology solutions are not only used for lateral dimensions, but also enable production and automation environments. 2D metrology can be used to identify features for part ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Application of respirometry system for biodegradation testing
The pattern of oxygen uptake– relative to that for a control substrate – gives a measure of the rate and extent of biodegradation of the organic constituents of the test sample. In this case, samples #2 and #3 showed a much lower biodegradation rate than the ...
By Respirometer Systems and Applications, LLC (RSA) based in Fayetteville, ARKANSAS (USA).
-
Premium
XRF Spectrometers solutions for positive material identification (PMI) sector
Positive Material Identification is the detection of materials through non-destructive element spectrometry in samples of metals, steel, and alloys, which is used to check the component composition of ores, soils, and other liquid and powder samples. This technology is widely used in various industries, numerous research, and academic laboratories worldwide due to the quickness and accuracy of the analysis. XRF PMI machine is usually used for these purposes. ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
Heavy metal analysis for laboratories
By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY.
-
Premium
Premium Gas Generators and Calibration Solutions for Industry, Emissions and Process Sector
The specialists words are “measuring is good but measuring right is better”. At the moment the thought of an homologation happen for a new or existing engine development, the precision of gas measures is a crucial point. CO2 taxes and regulations oblige power plants and incinarators owners to regulary measure and calibrate the emissions of their installations. In order to fulfill the various normalisations, the Sonimix gas mixers are the essential tools. They provide the precision, reliability and ...
By LNI Swissgas based in Versoix, SWITZERLAND.
-
Premium
Track-Etched Polymer Membrane Filters for Monitoring of Liquid and Gas Diffusion
Controlled drug delivery. Biochemical sensors. Glucose ...
By it4ip S.A. based in Louvain-la-Neuve, BELGIUM.
-
Premium
Determination of phenoxycarboxylic acid herbicides in water using high performance capillary electrophoresys method using Capel systems
The method allows determination of herbicides classified as phenoxycarboxylic acids, specifically: 2,4-dichloro-- phenoxybutyric acid (2,4-DB), 2,4-dichlorophenoxypropionic acid (2,4-DP, Dichlorprop), 2,4-dichloropheno-- xyacetic acid (2,4-D), and phenoxyacetic acid in samples of natural, potable and treated waste water by capillary electrophoresis. ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Measurements Solutions for Optical Material Homogeneity
An important property of an optical component is the variation of the refractive index of the material from which it is made, broadly referred to as homogeneity. Material inhomogeneity causes variation of the refractive index in a glass, which can be in the form of sharp, cord-like regions called striae or it can occur as a gradient of the refractive index through a larger region of the sample. Material index variations must be qualified to ensure their impact is within tolerance for a particular optical design ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Flue gas heavy metals on-line continuous monitoring solutions
According to US EPA IO - 3.3 standard method of heavy metals, flue gas heavy metals analyzer uses XRF nondestructive testing technology and flue gas automatic enrichment technology to realize the accurate measurement of flue gas heavy metals such as waste incineration plants, cement plants, thermal power plants, ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you