Monitoring & Testing Applications available in Nepal
-
Premium
Industrial solutions for water reuse optimization
Problem: With rising water costs, greater water scarcities and increasing environmental compliance regulations, reuse of water is becoming widely practiced in the manufacturing industry. For most industries, some form of treatment is required to ensure water meets standards for ...
By Real Tech Inc. based in Whitby, ONTARIO (CANADA).
-
Premium
Portable Light and Ruggedized Bio-Air Sampler for Military Forces
Coriolis RECON, a portable, light and ruggedized bio-air sampler, collects biological warfare agents in the air for detection during on-site ...
By Bertin Technologies based in Montigny-le-Bretonneux, FRANCE.
-
Premium
Ambient air quality monitoring solutions for remote sensing of ship emissions
New regulation forces ships to lower the emissions of SO2. Ships travelling in SECA areas has to either run on low sulphur fuel, or install SO2 scrubbers. To measure the SO2 emissions from a ship is not an easy task. OPSIS provides the Port Authorities with a unique measurement principle where the emissions from the ship is measured remotely. Light is passing the emissions and by analyzing the light, concentrations of SO2 can be ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emissions Monitoring for Mining / Emissions Monitoring for Smelting
The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Fully-automated gas chromatographs solutions for soil sanitation sector
Clean up of soil pollutants often involves the air extraction of the contaminated ground. By measuring the concentration of VOCs in the air, the progress of the cleaning process can be monitored and optimised. The robust Synspec analysers monitor the recovery process of the ...
By Synspec BV based in Groningen, NETHERLANDS.
-
Premium
Laboratory and scientific instruments solutions for pharmaceutical industry
Laboratory and scientific instruments solutions for pharmaceutical ...
By Shanghai Metash Instruments Co.,Ltd. based in Shanghai, CHINA.
-
Premium
Laboratory and scientific instruments solutions for medical industry
Laboratory and scientific instruments solutions for medical ...
By Shanghai Metash Instruments Co.,Ltd. based in Shanghai, CHINA.
-
Premium
Particulate Monitoring
The Opsis SM200 is a combined particulate monitor that can be used for both automatic measurement and filter sampling. It uses 47 mm filters for sampling and beta attenuation of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Cement materials for Lighting industry
Lighting | Halogen / Dichroic / HPS Lamps / Metal Halide; Potting or bonding applications. Ceramic and quartz assembly typical. Requires low coefficient of thermal expansion. High thermal conductivity ...
By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).
-
Premium
Machine condition monitoring for metals processing
Metals processing industries employ large, critical assets, the reliability of which is absolutely essential to their business model. An undetected failure of a piece of processing equipment such as a rolling mill gearbox, or a 1000 ton extruder press not only involves the cost of equipment repair and line downtime, but the product quality may be severely impacted. Today more than ever, there is also less redundancy. Oil analysis is a critical aspect of a reliability based maintenance program, and for many large ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Application package FLUXANA RAW-PROF
This application package is a 'ready to go' calibration kit for xrf instruments. It can, for example, contain all parts to perform a complete raw material (oxidic materials) calibration with elements for cement, glass, ceramic and raw materials industry: - Calibration set raw materials prepared from CRM as glass beads - Calibration work performed by FLUXANA expert 2 days on site - Drift monitors for xrf instrument - Control samples for validation - Flux FLUXANA application packages include always the sample ...
By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.
-
Premium
Temperature and gas sensing solutions products for industrial electronics
Optimize performance, boost functionality, and decrease costs. Industrial electronics require high power quality thanks to equipment and process control sensitivity (e.g., factory automation equipment, semiconductor processing, etc.). As a power system designer, you're faced with changing safety regulations, greater performance and functionality demands, increased costs, and size reduction ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA).
-
Premium
Gas analyzers for odor monitoring
The odor market usually asks a spot measurement using dynamic olfactometry. This method uses human nose to quantify odor as global fingerprint. Chromatotec has developed a new solution for continuous monitoring as a complementary solution to the human nose. The vigi e-nose analyzer allows to monitor sulfurs compounds with speciation in addition to total VOC and odor index. Correlation with human nose according to EN 13725 method are defined site per ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Ambient Air Pollution Monitoring for School Districts & Campuses
Your students breathe easy with air quality monitoring. Schools are facing more days with unhealthy air quality than ever before, negatively impacting academic performance and increasing ...
By Clarity Movement Co. based in Berkeley, CALIFORNIA (USA).
-
Premium
Determination of fluorescein in natural and oilfield water by fluorimetric method
Introduction The indicator (tracer) method is used in hydrology for following, or tracing, the water flows for understanding the processes in hydrological systems. Oil companies often use the indicator (tracer) method for monitoring the exploitation of oil pools. Indicator (tracer) method gives essential information on the geological structure of the oilfield and the filtration flows in the ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Drain Cameras to Inspect Water and Wastewater Lines
Drain inspection cameras are used for pipeline and duct inspections in plumbing, repair work. These systems consist a long insertion probe with a flexible "goose-neck" video camera probe for getting around corners. LED lights give excellent illumination and cctv type cheap on the tip captures clear images and allows image and video ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Activated carbons solutions for oil and gas industry
The Challenge: Managers of petrochemical facilities today are faced with striking a difficult balance between optimizing the operating the refinery to maximize profits and complying with increasingly stringent environmental regulations governing air and water emissions from the facility. Jacobi fully understands the scale and nuances of refinery operations, and we have developed a full range of activated carbons to meet every challenge in typical refinery ...
By Jacobi Group based in Kalmar, SWEDEN.
-
Premium
Measurements Solutions for Topography & Texture
As technology pushes forward, surfaces are being manufactured with exacting control and the need to measure surface texture with high precision and accuracy has become even more critical. When it comes to roughness measurements, there are 3 important factors: measuring the surface, processing the data, and reporting the ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Marine monitoring solutions for the SO2/CO2/NOx monitoring
Process control of a SO2 scrubber on a ship is a challenge due to wet and corrosive gases. In such environment, extractive gas sampling systems require high levels of maintenance in order to operate correctly. OPSIS monitoring system solves this by using an optical, non-contact, cross-duct technique. A light beam is sent across the duct or stack to be measured, and the captured light is sent through an optical fibre cable to an analyser. The analyser measures SO2, CO2 and NOx concentrations using UV and IR ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Biotrickling filter and bioscrubber for biological exhaust air cleaning
Structured packings for biological processes. With the biological elimination of odors, a better efficiency can be achieved with less effort and less use of chemical agents than in a purely chemical-oxidative process. ...
By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you