Monitoring & Testing Applications available in Slovenia

  • Premium

    Water monitoring technology for mining

    Ensuring that pollutants from mining activities do not enter surrounding natural water bodies is a key issue in environmental monitoring and regulatory compliance.

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    High quality gas sensor solutions for mining industry

    Fast, accurate and reliable measurement of CH4. The extraction of coal releases methane gas, which can mix with the air in a mine to form a hazard due to its flammability. Ventilation with fresh air from the surface is used to dilute the methane and reduce the risk of explosion. Monitoring of the methane content of the stale air exiting the mine allows the amount of ventilation to be controlled. Although our sensors are not ATEX approved for use in potentially explosive atmospheres they are suitable for monitoring...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Process analyzers & instruments for ores

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA).

  • Premium

    Emissions Monitoring for Mining / Emissions Monitoring for Smelting

    The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions monitoring.

    By Opsis AB based in Furulund, SWEDEN.

  • Environmental monitoring solutions for the mining sites industry

    Pumps, control systems and supplies for groundwater sample collection at mine sites in the U.S. and around the world. For more than 25 years, QED has been the leading supplier of innovative pumps, control systems and supplies for groundwater sample collection at mine sites in the U.S. and around the world. We’ve specialized in deep well sampling systems, to depths of 1500 ft. Now, our remote data collection systems allow you to monitor your sampling system performance online from any computer, anywhere.

    By QED Environmental Systems, Inc based in Dexter, MICHIGAN (USA).

  • Tunnel monitoring

    By fibrisTerre Systems GmbH based in Berlin, GERMANY.

  • Noise monitoring for the mining industry

    The management of noise from mining operations is recognized as a fundamental responsibility of the mining industry. Implementing a noise management system that includes noise surveys, day and night noise mitigation, and some level of noise monitoring is a primary function that is required to meet environmental impact standards in most locations.

    By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).

  • Geochemical Fingerprinting of Coltan Minerals Using LIBS

    LIBS spectra contains rich composition information that can help analysts identify the origin or source of geological samples. Read this application note to discover how Applied Spectra’s J200 LIBS Instrument identifies coltan mineral ores important for electronic manufacturing from conflict zones. Request this application note at http://appliedspectra.com/applications/application-notes.html

    By Applied Spectra, Inc. (ASI) based in Fremont, CALIFORNIA (USA).

  • Analytical services for mining industry

    Maxxam provides the mining industry with comprehensive analytical testing services including water, soil and air quality parameters. Analytical testing ranges from metal leaching and acid rock drainage, to Ecotoxicology services and environmental chemistry. We are accredited for specific analytical tests related to mining test regulations and requirements. Along with being accredited for tests such as environmental chemistry and acid mine drainage, below is an excerpt of the laboratory’s current scope of accreditat...

    By Maxxam Analytics based in Mississauga, ONTARIO (CANADA).

  • Environmental monitoring solution for mining industry

    Control of fugitive dust in the mining industry and in particular open cut operations is of great concern to the local community, environmental protection authorities and of course the mine operators. Dust emissions can cause both nuisance effects as well as health effects and so mines typically employ multiple dust suppression activities to minimise their environmental impact. Many of these activities can be expensive to operate and depending on environmental conditions, at the time, may not actually be effective...

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Precision moisture analysis instruments for mercury detection in mining

    The Jerome family of mercury vapor analyzers makes it easy to comply with MSHA regulations and keep your coworkers safe from mercury vapor. All Jerome analyzers are built in the USA and are tough enough to stand up to the rigors of daily work in a mine. Whether you need a rugged, no-frills mercury analyzer, advanced data management capabilities, ultra-low-level detection, or fixed-point mercury vapor monitoring, there is a Jerome instrument that fits your needs. No matter what you’re mining or where you&rsquo...

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Pressure sensors for Mining industry

    The pressure sensors in mining equipment must be robust, reliable and accurate. STS solutions can be found in hydraulic monitoring, pressure and temperature measurements in explosion endangered zones, and groundwater monitoring.

    By STS Sensor Technik Sirnach AG based in Sirnach, SWITZERLAND.

  • Radiation monitoring instruments for the mining - drilling industry

    Mining - drilling.

    By Technical Associates based in Canoga Park, CALIFORNIA (USA).

  • Water monitoring equipment for Mining

    Optimize your site assessments, operations, and site remediation with In-Situ equipment. Have confidence in your operation’s safety and efficiency with continuous water monitoring systems.

    By In-Situ, Inc. based in Fort Collins, COLORADO (USA).

  • Gas Detection & Hazardous Gas Monitoring Equipment for Mining

    Depending on the type of mining, the requirements for gas detection can vary greatly, however, there are five main sources of hazardous gas in mining applications.

    By Armstrong Monitoring Corporation (AMC) based in Ottawa, ONTARIO (CANADA).

  • Water monitoring for the mining industry

    By IC Controls Ltd. based in Orangeville, ONTARIO (CANADA).

  • Continuous emissions monitoring for mining industry

    Opsis non-contact monitoring solutions are very well suited for applications in the mining Industry, as the flue gas conditions often involve high temperature and high dust concentrations.

    By Enviro Technology Services Ltd based in Stroud, UNITED KINGDOM.

  • EDXRF spectrometers for mining & mineral industry

    Xenemetrix advanced ED-XRF spectrometers provide on-site quantitative analysis of mining products, thereby reducing the time for receiving results from days to seconds, compared to time consuming laboratory analysis. Materials recovered by mining, minerals or other geological materials that originate from the earth consist of all kinds of base metals - precious metals, iron, uranium, coal, diamonds, limestone, oil shale, rock salt and potash - all of which can be efficiently analyzed by Xenemetrix outstanding...

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Environmental testing for the mining industry

    By BSI based in Herndon, VIRGINIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you