Monitoring & Testing Applications available in New Mexico
-
Premium
Water and Wastewater Treatment Systems for Microelectronics
It stands out in the field of ultrapure water . Since electricity is produced from water, healthy and workable water is needed in this area. In this field, both microelectronics area and pure water processes gain value. Zetas company carefully carries out the pure water production stage by making accurate measurements. Pure water measurement is made around accurate in-line solutions. Technological infrastructure is also used around this measurement. ...
By ZetaÅŸ Kimya based in Ostim OSB/Yenimahalle, TURKEY.
-
Premium
Measurements Solutions for Consumer Electronics
Driven by consumer demands for faster, lighter, and more capable mobile devices, consumer electronics manufacturers and component suppliers are faced with the challenge of keeping pace with constant evolution of technology, shorter product life cycles, and increased ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Air pollution control for the electronics & semiconductor fabrication industry
Anguil’s portfolio of innovative, competitive solutions for this rapidly evolving industry provide guaranteed VOC destruction, reduced equipment footprint, and maximized production uptime and ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Water quality monitoring for semiconductor industry
Water is fundamental to the manufacturing process in a semiconductor facility. Electronic components are rinsed or washed several times during the producing process with ultrapure water (UPW) to remove residue. Continuous monitoring of organic constituents (TOC) on the influent city water assist with UPW production. Good quality waste streams for the manufacturing process can also be monitored for reuse ...
By Real Tech Inc. based in Whitby, ONTARIO (CANADA).
-
Premium
RoHS analysis in electronic equipment
The RoHS directive stipulates maximum limits for various hazardous substances in electrical and electronic equipment. Meeting the RoHS Directive requires reliable equipment and methods. As a leading manufacturer of precision instruments for chemical analysis, we are aware of these challenges. For this reason, Metrohm offers you not only the most advanced equipment, but rather complete solutions for the particular tasks at ...
By Metrohm AG based in Herisau, SWITZERLAND.
-
Premium
Water treatment solutions for the micro-electronics industry
Micro-electronics industry is probably the fastest growing industry driven mainly by the expansion of the computer and telecommunications markets, as well as the growing automotive, military and industrial electronic markets. The production of smaller and smaller microelectronic components is contributing for a great pressure for the purification of process waters, given the extreme high quality water demanded by the manufacturers Lenntech provides complete solutions for ultra pure water production for ...
By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.
-
Premium
XRF Spectrometers solutions for RoHS and WEEE Testing sector
There is no secret that in the EU, every sphere of the industry that concerns production falls under different regulations that concern waste exposure and recycled materials usage. When it comes to electronics, there are two directives that regulate the issues: RoHS and WEEE. They regulate the existence and concentration of harmful substances in various categories of production (RoHS) and responsibility for the proper recycling of electrical equipment (WEEE). These regulations can prevent appearance on the EU ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
Chemiluminescense based analyzer for semiconductor sector
NOx detection is an innovative approach in CMP (Chemical Mechanical Polishing) process control. CMP smoothens the wafer surface with a combined chemical and mechanical polishing procedure. During production, wafers are coated by a thin layer. To avoid damage to the wafer surface, for instance by stress cracks, the NOx emitted as soon as the wafer is plane and blank must be measured. Therefore, a high-resolution NOx-detector, capable of determining exactly when the polishing process must be stopped, is essential. ...
By ECO Physics AG based in Duernten, SWITZERLAND.
-
Premium
Hand-Held & Process Control Water Testing Instrument for Circuit Board Cleanliness Testing Industry
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple 'on line' test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Measurements Solutions for Micro-Electromechanical Systems (MEMS)
Micro-electromechanical systems, or MEMS, have become critical components in a variety of consumer and industrial products, including things inkjet printers, cellular phones and accelerometers for automobile airbags. MEMS devices are typically manufactured in high volumes, often using modified semiconductor processes, to exacting specifications. For MEMS manufacturers to meet high production standards, these devices need to be measured at various steps of the design, fabrication and production ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Monitors, gas analyzers solutions for semiconductor / microelectronics sector
Particle Measuring Systems (PMS) has the application expertise and particle monitoring instruments with the industry leading sensitivity you need to reduce yield loss. Particle Measuring Systems PMS can provide you with particle monitoring solutions to determine how clean your semiconductor or microelectronics manufacturing is. By continuously counting particles when and where products (water, chemicals, air) are at risk, we provide the global expertise and high-performance laser particle counters you count ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
-
Premium
Recycling equipment for shredding electronic scrap (E-scrap)
Processing electronic scrap (E-Scrap or WEEE) presents special challenges. Computers, consumer electronics, and IT equipment need to be destroyed to extract recyclables or ensure the security and complete destruction of the product. Hard drives, tapes and data storage devices must be completely destroyed to provide data security. And, while many electronic scrap items do not require the specific size reduction that hard drives or other data storage devices require, all electronic scrap includes recoverable ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
Temperature and gas sensing solutions products for semiconductor manufacturing
Enable advanced plasma processes control via highly accurate power delivery, frequency tuning, and multi-level pulsing. To manufacture leading-edge integrated circuits (ICs), new processes and materials are deployed for transistor or memory cell creation. Declining feature size and atomic-level precision make extreme process control essential. And new device architectures (3D-NAND and Fin FETs) drive multi-patterning (double and quadruple) demand — making innovative etch and deposition processes ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA).
-
Premium
Temperature and gas sensing solutions products for industrial electronics
Optimize performance, boost functionality, and decrease costs. Industrial electronics require high power quality thanks to equipment and process control sensitivity (e.g., factory automation equipment, semiconductor processing, etc.). As a power system designer, you're faced with changing safety regulations, greater performance and functionality demands, increased costs, and size reduction ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA).
-
Nitrogen Generator for Electronics Production
Electronics manufacturers can reduce running costs in production by using nitrogen generated in-house. Electronic assemblies are often manufactured using the wave soldering, selective soldering and reflow processes. A shielding gas atmosphere composed of nitrogen helps to ensure product ...
By Inmatec GaseTechnologie GmbH & Co. KG based in Herrsching, GERMANY.
-
Laboratory and industrial ovens and furnaces solutions for electronics industry
Within the electronics industry manufacturers of ICs (integrated circuits), PCB and semiconductor devices use Carbolite bench top and floor standing ovens for a number of tests to prove their components. The Carbolite Peak series (PN Natural Convection Oven & PF Fan Convection Oven) as well as the GP General Purpose ranges of ovens are used at elevated temperatures over an extended period for burn-in and stress testing of components to detect faults. Carbolite ovens can accommodate both rack and shelf loading. ...
By Carbolite Gero Ltd - part of Verder Scientific based in Hope, UNITED KINGDOM.
-
Air Purification Solutions for Corrosion Control
Protecting your critical electronic equipment from gaseous contaminants in the air that corrode copper and silver connectors, contacts, printed circuit boards, hard drives, switches, and cabling is critical to operations. Applying gas-phase media manufactured to chemically react with acid gases extends the useful life of these sensitive ...
By ProMark Associates, Inc. based in Evanston, ILLINOIS (USA).
-
Air filtration solutions & corrosion monitors for electronics
We depend on electronic components in every type of technology today. It is crucial that these components work perfectly, every time, all the time. Purafil’s expertise protects critical technology from failure due to common air ...
By Purafil, Inc. - Filtration Group based in Doraville, GEORGIA (US) (USA).
-
Air filtration solutions & corrosion monitors for semiconductor manufacturing facility
What is the broadest benefit of information technology? It empowers us every day. We can be creative. We can be productive. We can learn new things. It is exciting for Purafil to support technological manufacturing: assessing the environment, controlling contamination, and monitoring to verify system ...
By Purafil, Inc. - Filtration Group based in Doraville, GEORGIA (US) (USA).
-
Elemental Analysis for Semiconductors & Magnetic Media by EDXRF
Semiconductor device fabrication is the process used to create the integrated circuits (silicon chips) that are present in everyday electrical and electronic devices. It is a multiple-step sequence of photographic and chemical processing steps during which electronic circuits are gradually created on a wafer made of pure semiconducting material. Silicon is the most commonly used semiconductor material today, along with various compound semiconductors. The entire manufacturing process, from start to packaged chips ...
By Applied Rigaku Technologies based in Cedar Park, TEXAS (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you